基于热带海洋大气环境下机载PCB板的环境适应性对比研究

目的 通过机载PCB板(Printed Circuit Board,PCB)在热带海洋大气环境下的腐蚀老化特征和电气性能退化规律分析,研究其在热带海洋大气环境下的环境适应性。方法 根据热带海洋大气环境中PCB板的实际使用环境大多为舱室内部封闭或半封闭的情况,分别设计并开展海南万宁海洋平台棚下暴露场和某海域环境户外简易遮蔽玻璃框下3 a的自然环境试验。结果 PCB板的焊点、焊盘、印制导线以及引线头等部位在2种试验环境中均出现了不同程度的腐蚀破坏,试验后期,所有部位的腐蚀程度全部达到了4级,导通电阻从几十毫欧增大至几十兆欧,绝缘电阻从10 GΩ以上降低至几兆欧。结论 在万宁站试验2 a和某海域试验3 a后,PCB板均不满足耐电压的技术要求(500 V交流电压60 s),万宁海洋平台棚下暴露场对PCB板的环境适应性更为严酷。     

福建近岸表层海水中阴离子表面活性剂和PCB的污染

用亚甲蓝分光光度法和GC-ECD法分别对福建近岸表层海水中的阴离子表面活性剂和PCBs进行了分析,初步探讨了表层海水中这两类污染物的来源.表层海水中阴离子表面活性剂浓度范围为0.04～1.987 mg/L,较高浓度值站点主要位于九龙江口、闽江口和湄洲湾海域.PCBs的浓度在3.9～367.1 ng/L之间,整体上近岸站点浓度值比离岸站点高,中北部浓度值比南部高.与其他地区的研究结果及海水水质标准进行比较,福建沿海表层海水中阴离子表面活性剂和PCB的污染都较为严重.     

云桌面终端电源端传导骚扰和辐射骚扰整改案例

某云桌面终端在进行中国强制性认证(CCC)时,电磁兼容试验项目电源端传导骚扰、辐射骚扰测试均出现超标现象。将重点从PCB板级电路EMC设计方面剖析其测试不合格原因,并给出相应的整改措施,最后对此案例进行总结,给出类似电子产品在PCB设计时的注意事项,以期能给PCB设计工程师提供一些参考意见。     

Characterization of polychlorinated biphenyls and brominated flame retardants in surface soils from Surabaya, Indonesia

In this study, soil contamination by PCBs, PBDEs, HBCDs and two novel BFRs such as 1,2-bis-(2,4,6-tribromopenoxy) ethane (BTBPE) and decabromodiphenyl ethane (DBDPE) in various locations such as industrial, urban, rural, dumping site and agricultural areas of Surabaya, Indonesia has been characterized in order to evaluate their contamination status, profiles, potential sources, fate and behavior. Range and median concentrations of PCBs, PBDEs, HBCDs, BTBPE and DBDPE were ND - 9.6 (1.2), 0.069 - 24 (7.4), ND - 1.8 (0.48), ND - 1.7 (0.14) and ND - 7.6 (2.2) ng g⁻¹ dw, respectively. Industrial, urban and dumping areas were inventoried as the main sources of these pollutants. Decreasing gradient levels were observed for these contaminants from industrial district, urban, dumping site, rural and agricultural areas, in that order. Furthermore, organic carbon contents and proximity to the point sources were found as the major controlling factors. Contaminant profiles were characterized by the predominance of hexa-, hepta- and penta-homologues for PCBs; deca-, nona- and octa- for PBDEs and α-isomer for HBCDs. Product mixtures such as Ar1260/KC600 and Ar1254/KC500 for PCBs, deca- and octa-BDEs for PBDEs were the possible common formulations used in study area. To our knowledge, this is a first comprehensive study on characterization of soil contamination by PCBs, PBDEs and HBCDs together with two novel BFRs in a highly industrialized city located in tropical region. This study provides baseline information for establishing national monitoring programs in Indonesia.     

Fenton法处理线路板生产废水中有机物质

比较传统Fenton法和电解Fenton法对线路板生产中高浓度有机废水的处理效果。根据模拟实际生产情况，确定健鼎公司电解Fenton法的最佳处理条件。     

Testosterone concentrations and male genital organ morphology in Greenland sledge dogs (Canis familiaris) dietary exposed to organohalogen contaminants

This study investigated whether low-level, long-term in utero and post-natal exposure to organohalogen pollutants disrupts male reproductive organ morphology and testosterone production in Greenland sledge dogs (Canis familiaris), as a model of Arctic top predators feeding on marine mammals. Six male dogs were followed for 1 year and testosterone concentrations, testes/baculum morphology and baculum bone mineral density (BMD) was determined. Three males were exposed to organohalogenated contaminants (OHCs) in utero through maternal dietary intake of minke whale blubber (Balaenoptera acutorostrata), with a post-weaning ∑OHC intake of 10.4–11.7 µg kg^?1 day^?1 resulting in an adipose tissue range of ∑OHC 4518–5729 ng (g lw)^?1 after 1 year. Three control males were exposed to very low concentrations of OHCs through pork fat. No significant differences were seen in plasma testosterone concentrations, baculum weight, BMD, and testicular length in the six male dogs (control, n = 3 and exposed, n = 3) measured at 3, 5, 7, 9, and 12 months of age. Testicular weights were significantly lower in the exposed group (p = 0.015, n = 2). Although this study had a limited number of animals, it was observed that in utero and the following 12 months of chronic exposure to a complex mixture of contaminants in the form of naturally accumulated OHCs does not affects testosterone levels, but possibly affects testicular weights in sledge dogs.     

环境样品中非邻位取代共平面多氯联苯的测定

本文对测定实际环境样品中痕量非邻位取代共平面多氯联苯的方法进行了研究。样品萃取，净化后，经活性碳性层析分离，利用ＧＣ－ＥＣＤ毛细管柱双柱定性，外标法进行定量，测定了土壤和鱼肌肉中μｇ·ｋｇ＾－１数量级的３，３‘，４，４’－四氯联苯及ｎｇ·ｇｋｇ＾－１数量级的３，３‘，４’，５－五氯联苯。     

纳米零价铁对溶液中PCB77的降解及其影响因素

设计了以溶液初始pH值、3,3’,4,4’-四氯联苯(PCB77)初始浓度、纳米零价铁(Fe0)投加量、纳米零价硅(Si0)投加量、腐殖酸和环糊精浓度为影响因素的正交试验,研究纳米Fe0降解PCB77时各因素对反应体系中PCB77残留率、氢离子浓度及氧化还原电位变化的影响及其相互关系。结果表明,在溶液初始pH值为4.5,初始ρ(PCB77)为1 mg.L-1,纳米Fe0投加量为10 g.L-1,纳米Si0投加量为0,ρ(腐殖酸)为0.25 g.L-1,ρ(环糊精)为1 g.L-1时,反应2 h后,PCB77残留率最低,为35.2%。溶液初始pH值对反应体系中PCB77的残留率影响最大,纳米Fe0投加量次之;溶液初始pH值对反应体系中氢离子浓度变化影响最大,环糊精投加量次之;PCB77初始浓度对反应体系中氧化还原电位变化影响最大,纳米Fe0投加量次之。     

表面活性剂溶液中多氯联苯溶解的特性

对表面活性剂溶液中多氯联苯的溶解特性进行了研究.发现非离子型表面活性剂对多氯联苯增溶效果优于阴离子型表面活性剂;在浓度大于临界胶束浓度(CMC)范畴,不但表面活性剂的增溶效果远较其浓度低于CMC时为佳,而且表面活性剂浓度与多氯联苯的溶解度成正比地线性相关,此结果说明,表面活性剂主要通过形成胶束来增加多氯联苯的溶解度.多氯联苯在非离子型表面活性剂胶束溶液中与在正己烷中的紫外-可见光谱相似,进一步说明胶束内的多氯联苯分子主要分布于类似正己烷的疏水胶核区域.在十二烷基醇聚氧乙烯(10)醚溶液中,所试多氯联苯的辛醇-水分配系数(K_ow)与其胶束-水分配系数(K_m)存在很好的线性相关关系.     

关于多氯联苯测定的探讨

对PCB测定中所使用的Aroclor和单体标准品的区别、联系和使用进行了分析阐述,并对PCB测定中的气相色谱法、气相色谱质谱联用法、生物分析法、免疫分析法的优点、局限性进行了比较.对今后的PCB的测定提出了建议。