Sources, distribution, and risk assessment of organochlorine pesticides in Nairobi City, Kenya

The distribution and sources of organochlorine pesticides (OCPs) in air and surface waters were monitored in Nairobi City using triolein-filled semipermeable membrane devices (SPMDs). The SPMDs were extracted by dialysis using n-hexane, followed by cleanup by adsorption chromatography on silica gel cartridges. Sample analysis was done by GC-ECD and confirmed by GC–MS. Separation of means was achieved by analysis of variance, followed by pair-wise comparison using the t-test (p≤ 0.05). The total OCPs ranged between 0.018 – 1.277 ng/m³ in the air and <LOD – 1391.000 ng/m³ in surface waters. Based on the results, the means of Industrial Area, Dandora and Kibera were not significantly different (p≤ 0.05), but were higher (p≤ 0.05) than those of City square and Ngong’ Forest. The results revealed non-significant (p≤ 0.05) contribution of long-range transport to OCP pollution in Nairobi City. This indicated possible presence of point sources of environmental OCPs in the city. The water-air fugacity ratios indicated that volatilization and deposition played an important role in the spatial distribution of OCPs in Nairobi City. This indicated that contaminated surface waters could be major sources of human exposure to OCPs, through volatilization. The incremental lifetime cancer risks (ILCR) determined from inhalation of atmospheric OCPs were 2.3745  ×  10^?13 – 1.6845  ×  10^?11 (adult) and 5.5404  ×  10^?13 – 3.9306  ×  10^?11 (child) in the order: Dandora > Kibera > Industrial Area > City Square > Ngong’ Forest. However, these were lower than the USEPA acceptable risks, 10^?6 – 10^?4. This study concluded that atmospheric OCPs did not pose significant cancer risks to the residents.     

大气污染对儿童唾液溶菌酶含量的影响

本文分析了重庆市大气污染(SO_2、NO_x、TSP)的特征,报导重污染区儿童唾液溶菌酶含量明显低于相对污染区(P<0.00001),污染区儿童体内免疫功能下降;发现暴露于两种或两种以上因素(酸沉降物、被动吸烟、燃煤)时,对儿童唾液溶菌酶含量的影响远大于它们单一因素的作用(P<0.00001),经逐步回归分析,得Y=401.6869-68.1306X_5-42.3868X_1-20.8466X_4(r=0.7681,F值=185.08,P<0.00001);并针对重庆市大气污染的具体情况,提出一些有意义的建议措施。     

Oxygen demand for the stabilization of the organic fraction of municipal solid waste in passively aerated bioreactors

Conventional aerobic waste treatment technologies require the use of aeration devices that actively transport air through the stabilized waste mass, which greatly increases operating costs. In addition, improperly operated active aeration systems, may have the adverse effect of cooling the stabilized biomass. Because active aeration can be a limiting factor for the stabilization process, passive aeration can be equally effective and less expensive. Unfortunately, there are few reports documenting the use of passive aeration systems in municipal waste stabilization. There have been doubts raised as to whether a passive aeration system provides enough oxygen to the organic matter mineralization processes. In this paper, the effectiveness of aeration during aerobic stabilization of four different organic fractions of municipal waste in a reactor with an integrated passive ventilation system and leachate recirculation was analyzed. For the study, four fractions separated by a rotary screen were chosen. Despite the high temperatures in the reactor, the air flow rate was below 0.016 m³/h. Using Darcy’s equation, theoretical values of the air flow rate were estimated, depending on the intensity of microbial metabolism and the amount of oxygen required for the oxidation of organic compounds. Calculations showed that the volume of supplied air exceeded the microorganisms demand for oxidation and endogenous activity by 1.7–2.88-fold.     

Diffusive gradients in thin films using molecularly imprinted polymer binding gels for in situ measurements of antibiotics in urban wastewaters

• Selective molecularly imprinted polymer (MIP) binding gel was prepared. • MIP-DGT showed excellent uptake performance for antibiotics. • In situ measurement of antibiotics in wastewaters via MIP-DGT was developed. • The MIP-DGT method was robust, reliable, and highly sensitive. Urban wastewater is one of main sources for the introduction of antibiotics into the environment. Monitoring the concentrations of antibiotics in wastewater is necessary for estimating the amount of antibiotics discharged into the environment through urban wastewater treatment systems. In this study, we report a novel diffusive gradient in thin films (DGT) method based on molecularly imprinted polymers (MIPs) for in situ measurement of two typical antibiotics, fluoroquinolones (FQs) and sulfonamides (SAs) in urban wastewater. MIPs show specific adsorption toward their templates and their structural analogs, resulting in the selective uptake of the two target antibiotics during MIP-DGT deployment. The uptake performance of the MIP-DGTs was evaluated in the laboratory and was relatively independent of solution pH (4.0–9.0), ionic strength (1–750 mmol/L), and dissolved organic matter (DOM, 0–20 mg/L). MIP-DGT samplers were tested in the effluent of an urban wastewater treatment plant for field trials, where three SA (sulfamethoxazole, sulfapyridine, and trimethoprim) and one FQ (ofloxacin) antibiotics were detected, with concentrations ranging from 25.50 to 117.58 ng/L, which are consistent with the results measured by grab sampling. The total removal efficiency of the antibiotics was 80.1% by the treatment plant. This study demonstrates that MIP-DGT is an effective tool for in situ monitoring of trace antibiotics in complex urban wastewaters.     

Which compounds contribute most to elevated airborne exposure and corresponding health risks in the Western Balkans?

A majority of ongoing monitoring of persistent organic pollutants (POPs) is currently focused on chemicals emphasized in the Stockholm Convention. Quantitative detection of other substances (especially those with numerous anthropogenic sources such as polyaromatic hydrocarbons (PAHs)) is, however, also needed since their concentrations are usually several orders of magnitude higher. A goal of this study was to determine how various groups of compounds contribute to total human health risks at the variety of sampling sites in the region of Western Balkan. Distribution of the risks between the gas and particulate phases was also addressed. Results showed that inhalation exposure to organochlorine pesticides (OCPs) does not represent a significant risk to humans, while polychlorinated biphenyls (PCBs) re-volatilized to the atmosphere from contaminated soils and buildings can pose a problem. PCB evaporation from primary sources (currently used PCB-filled transformers or non-adequate storage facilities) generally resulted in much higher atmospheric concentrations than evaporation from the secondary sources (soils at the sites of war destructions). A majority of the human health risks at the urban sites were associated with PAHs. Between 83 and 94% of the cumulative risk at such sites was assigned to chemicals sorbed to particles, and out of it, PAHs were responsible for 99%.     

Choice of parameters for passive shielding of power-frequency magnetic fields

Epidemiological studies suggesting the possibility of harmful effects on human (specifically children’s leukaemia) due to long-term exposure to magnetic fields of extremely low frequency (e.g. 50/60 Hz) and relatively low values (i.e. over the microtesla range) have stirred high activity in the topic of magnetic field mitigation. To reduce these fields, it is common to use passive metal screens (e.g. plates made of aluminium or steel). To design them, effective and fast numerical computations are highly desirable. In this article, a method is presented, which computes various parameters of screens in a given shielding problem and yields magnetic field distribution and shielding factors. The method takes into consideration the 3D field distribution and is able to solve systems with large aspect ratios (thin thickness in comparison with its other dimensions); this is a common problem where other methods such as finite elements often experience difficulties. The presented method computes separately the field inside and outside the screens. Afterwards, the solutions are “stitched” together along the border of the subregions. Two practical examples are given of the developed numerical method.     

博物馆室内微环境中碱性气体的被动采样方法研究

针对博物馆微环境中的碱性污染气体-氨气,采用自行研制的被动采样器,建立了一套适合博物馆馆藏文物保存环境中氨气含量分析的被动采样-离子色谱检测方法,应用于博物馆的实地采样分析,通过与主动法采样对照,获得了被动采样器在博物馆微环境中氨的吸收系数,从而获得采样点空气中氨气的浓度,为博物馆文物保存环境监测提供了可行方法。     

Chemical composition of burnt smell caused by accidental fires: environmental contaminants

The chemical composition of the odors typical of fires has recently been deciphered. Basically the constituents are mixtures of acetophenone, benzyl alcohol, hydroxylated derivatives of benzaldehyde, methoxylated and/or alkylated phenols and naphthalene. This finding makes it possible to develop objective, practical analytic measurement methods for the burnt smell as a contribution to improving fire damage assessment and remediation monitoring. With the aid of an artificially produced burnt smell and a panel of testers the odor detection threshold of a test mixture was determined olfactometrically to 2 μg m⁻³. Using a defined burnt-smell atmosphere in a test chamber, analytical methods with active sampling, the adsorbents XAD 7 and TENAX TA, and GC/MS measurement were then optimized and tested with a view to being able to carry out sensitive quantitative measurement of burnt smells. A further practical method with particular application to the qualitative characterization of this odor is based on the use of a new SPME (solid-phase microextraction) field sampler with DVB/CAR/PDMS (divinylbenzene/Carboxen™/polydimethylsiloxane) fibers.     

Assessing seasonal and spatial trends of persistent organic pollutants (POPs) in Indian agricultural regions using PUF disk passive air samplers

The first survey of persistent organic pollutant (POP) concentrations in air across several Indian agricultural regions was conducted in 2006-2007. Passive samplers comprising polyurethane foam (PUF) disks were deployed on a quarterly basis at seven stations in agricultural regions, one urban site and one background site. The project was conducted as a sub-project of the Global Atmospheric Passive Sampling (GAPS) Network. In addition to revealing new information on air concentrations of several organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs), the study has demonstrated the feasibility of conducting regional-scale monitoring for POPs in India using PUF disk samplers. The following analytes were detected with relatively high concentrations in air (mean for 2006 and 2007, pg/m³): α- and γ-hexachlorocyclohexane (HCH) (292 and 812, respectively); endosulfan I and II (2770 and 902, respectively); p,p′-DDE and p,p′-DDT (247 and 931, respectively); and for the sum of 48 PCBs, 12,100 (including a site with extremely high air concentrations in 2007) and 972 (when excluding data for this site).     

Mobile passive samplers: concept for a novel mode of exposure

Integrative passive sampling with devices such as semipermeable membrane devices generally relies on rigs for month-long static exposures in water. We evaluate here whether mobile exposures of passive samplers can provide reliable estimates of dissolved contaminant concentrations. Mobile exposures were obtained by towing samplers fastened to the end of a benthic trawl net. Significant and reproducible absorption of polycyclic aromatic hydrocarbons during 5 h-long deployments was made possible by high sampling rates resulting from high water turbulences during towing at 1.2-1.5 knots. Sampling rates (72-215 L d⁻¹) estimated from the dissipation of performance reference compounds were supported by in situ calibration with samplers exposed for a 30 days in the vicinity of the test site. Higher fluoranthene and pyrene absorption in samplers exposed to the trawling-induced sediment plume could be attributed to desorption from re-suspended sediments. This mode of exposure has the potential to be used in monitoring programmes.