Origin of raised maternal serum alpha-fetoprotein levels in second-trimester oligohydramnios

Concanavalin A (Con A) subtyping of alpha-fetoprotein (AFP) revealed higher concentrations of AFP non-reactive with Con A in sera of 12 pregnant women with second-trimester oligohydramnios and raised total serum AFP levels than in sera of 42 pregnant women with raised total serum AFP levels and a normal amniotic fluid volume. This suggests that in oligohydramnios the origin of excess AFP in the maternal compartment is amniotic fluid. It is proposed that oligohydramnios and the associated raised maternal serum AFP levels are caused by damage of the fetal membranes prior to 16 weeks of gestation resulting in leakage of amniotic fluid to the decidual tissue and resorption in the maternal circulation.     

Green energy generation by pressure retarded osmosis: State of the art and technical advancement—review

Pressure-retarded osmosis (PRO) is a method for converting salinity gradients to power by allowing water to flow through a semi-permeable membrane against an applied hydraulic pressure. PRO already has a long history, starting from the middle of the last century, and has rapidly improved in recent years. In this paper, we present a historical development of PRO since its inception: the development of this renewable energy process has gone through several stages, depending on technological developments, worldwide energy demands, and environmental concerns. The technological progress of the process is also studied, as well as its cost viability and environmental impact. Finally, some ideas to further develop the PRO process and mitigate its detrimental effects are discussed.     

Uptake of cadmium into cells in culture∗

Cadmium has been recognized as pollutant of the environment for many years and numerous studies on its toxic effects have been carried out. Little, however, is known about its metabolic behaviour e.g. why the metal is accumulated so extremely rapidly into the organs of men and animals. Since the study of the individual metabolic steps is very difficult in vivo cell cultures may be used to obtain first indications of what happens in the whole animal.

We used CHO cells in monolayer culture to study the conditions under which the uptake of cadmium occurs. From serumfree medium the metal is accumulated rapidly in the cells. The uptake is inhibited very strongly by the presence of serum or albumin. Accumulation occurs against a concentration gradient and is dependent on the incubation temperature. Below 10°C no cadmium uptake is seen. Several substances which are known to affect cell metabolism have been used to influence cadmium accumulation. Neither inhibitors of energy production nor microtubule or microfilament disruptors showed any substantial effect. In contrast SH‐group blocking agents markedly reduced cadmium uptake.

The results show that cadmium uptake does not occur by passive diffusion but by some active mechanism.     

Characterization and recycling of polymeric components present in cell phones

The cell phone market is developing at a rapid speed. Today there are more than 1.6 billion consumers in the world, and the lifetime of a cell phone is less than 2 years. As a consequence, there is an increase in the waste associated to this product, and many alternatives to the disposal of the cell phones are being studied, such as recycling which shows to be the most important. It is crucial to know what materials constitute the cell phone in order to carry out recycling and determine environmental and economical issues. This work presents an evaluation of the cell phone components, characterizing the raw materials and some properties of the recycled materials.     

Ion exchange membrane-assisted electro-activation of aqueous solutions: Effect of the operating parameters on solutions properties and system electric resistance

The properties of electro-activated (EA) aqueous solutions as well as the dynamics of their changes were considered in the current study using aqueous solutions of NaCl and NaHCO₃. The concentrations of the salt solutions were 0.5, 0.25, 0.125 and 0.05 M. The tests were performed at the DC current densities of 25, 37.5, and 50 Å/m². The electro-activation reactor consisted of three individual cells assembled together and separated by anion-exchange (AEM) and cation-exchange (CEM) membranes. During the experiments, four configurations of the membrane placements and solutions concentrations were studied. The obtained results showed the dynamics of the electro-activation process that allows obtaining electro-activated solutions with targeted properties such as pH and oxydo-reduction potential (ORP). It was possible to obtain electro-activated solutions at the anodic side (acid anolyte) with pH of 3.0, 3.5, and 4.0 and ORP of +1100 ± 15 mV when NaCl solution was used as electrolyte. Furthermore, several types of electro-activated solutions with high redox potential (ORP = +921 ± 12 mV) and neutral pH (6.48 ± 0.05) were obtained on the anode side when sodium carbonate was used. At the same time, two types of solutions, one with acid pH (2.14 ± 0.14) and the other one with alkaline pH (10.46 ± 0.03) with ORP = +689 ± 10 and 110 ± 21 mV, respectively, were obtained in the central compartment which considered as electro-activated solutions obtained by means of noncontact electro-activation.     

Explicit and implicit coupling during solute transport through clay membrane barriers

Simulations of salt (KCl) flux through a 1-m-thick clay membrane barrier (CMB) based on coupled solute transport theory are compared to simulated fluxes based on traditional advective-dispersive transport theory. The simulations are based on measured values for the effective salt-diffusion coefficient (Ds*) and chemico-osmotic efficiency coefficient (omega) for a bentonite-based barrier material subjected to KCl solutions. The results indicate that the exit salt flux is reduced due to both explicit coupling (hyperfiltration and chemico-osmotic counter-advection) and an implicit coupling effect resulting from the decrease in Ds* due to a decrease in the apparent tortuosity factor, tau a, with an increase in omega. Implicit coupling is shown to be more significant than explicit coupling for reducing and retarding salt flux through a CMB under diffusion-dominated conditions. Failure to account for the implicit coupling effect may result in unrealistic results, such as the existence of salt flux through a perfect (ideal) clay membrane (i.e., omega=1).     

Photoreduction of parathion ethyl †

Photodegradation of parathion ethyl in presence of unsaturated biomolecules takes place by sufficient reduction of the phenyl nitro group. Main products are N,0‐dialkenyl hydroxylamino, cis/trans azo, and azoxy derivatives of parathion.     

Aging of PVDF and PES ultrafiltration membranes by sodium hypochlorite: Effect of solution pH

Sodium hypochlorite (NaClO) is a commonly applied cleaning agent for ultrafiltration membranes in water and wastewater treatment. Long-term exposure to NaClO might change the properties and performance of polymeric membranes, and ultimately shorten membrane lifespan. Active species in NaClO solution vary with solution pH, and the aging effects can change depending on the membrane material. In this study, the aging of polyvinylidene fluoride (PVDF) and polyethersulfone (PES) membranes by NaClO at pH 3–11 was investigated by examining variations in chemical composition, surface charge, surface morphology, mechanical strength, permeability, and retention ability. Polyvinyl pyrrolidone (PVP), which was blended in both membranes, was oxidized and dislodged due to NaClO aging at all investigated pH values, but the oxidation products and dislodgement ratio of PVP varied with solution pH. For the PVDF membrane, NaClO aging at pH 3–11 caused a moderate increase in permeability and decreased retention due to the oxidation and release of PVP. The tensile strength decreased only at pH 11 because of the defluorination of PVDF molecules. For the PES membrane, NaClO aging at all investigated pH resulted in chain scission of PES molecules, which was favored at pH 7 and 9, potentially due to the formation of free radicals. Therefore, a decrease in tensile strength and retention ability, as well as an increase in permeability, occurred in the PES membrane for NaClO aging at pH 3–11. Overall, the results can provide a basis for selecting chemical cleaning conditions for PVDF and PES membranes.     

MWNTs/TiO2/聚酯功能复合膜吸附及其净化性能

以聚酯工业滤布为基膜,采用溶胶凝胶和浸渍方法制备了具有吸附-光催化功能的多壁碳纳米管(MWNTs)/TiO2涂层的复合膜,该复合膜对模拟水样低浓度(10mg/L)的双酚A具有较高吸附性能.随着复合膜上负载二氧化钛中的MWNTs的比例(17.6%,29.9%,和46.0%)增加,吸附去除率显著提高;吸附饱和的复合膜上的污染物双酚A可通过20W 紫外灯(l=254nm)照射Fenton氧化反应去除.吸附实验和HPLC分析表明,除了超声处理会引起浸渍负载的材料脱落外,复合膜吸附性能恢复较好.     

电子受体类型对聚磷污泥胞外聚合物的影响研究

采用3种电子受体(硝氮、亚硝氮、氧),在SBR反应器中分别驯化了具有稳定除磷能力的聚磷污泥。对比研究了不同聚磷污泥胞外聚合物(EPS)的组分与含量,结合三维荧光光谱对EPS中有机物质进行分析。研究表明,以硝氮、亚硝氮为电子受体的聚磷污泥EPS平均浓度较为接近,分别为115.6mg/gVSS、133.5 mg/gVSS,由厌氧段至缺氧段,EPS总浓度有所下降。以氧为电子受体聚磷污泥的EPS平均浓度相对较高,为194.5 mg/gVSS,由厌氧段至好氧段,EPS总浓度略有升高。不同聚磷污泥的EPS组分均以胞外蛋白为主,占EPS总量的53%~65%,多糖与核酸占EPS总量28%~34%、5%~7%。三维荧光光谱显示3种聚磷污泥EPS均具有芳香结构蛋白质、可溶性代谢物的荧光峰,另外,以硝氮为电子受体的聚磷污泥还具有明显的腐殖酸类物质的荧光峰。研究结果表明电子受体对聚磷污泥EPS的组分、浓度、有机质类别有一定的影响。