降低FCC再生烟气NOx排放助剂的实验室评价

通过采用ACE装置与烟气NOx分析仪器联用的实验室评价方法,可在更接近实际催化裂化反应-再生过程的条件下,评价助剂对再生烟气中NOx的催化转化性能,同时还可考察助剂的加入对催化裂化产品分布的影响。采用该方法对几种降NOx助剂的性能进行了评价,结果表明,在催化剂体系中含有Pt基CO助燃剂的情况下,加入4％的RDNO;助剂后,烟气NOx降低幅度约30％～40％,且催化裂化产品分布基本不受影响。     

几种印染助剂对壳聚糖稳定纳米铁去除酸性品红的影响

以氯化铁为铁源,硼氢化钠为还原剂,壳聚糖为稳定剂,采用液相还原法制备壳聚糖稳定纳米铁（CS-nZⅥ）;研究了印染废水中常见助剂NaNO₃、Na₂SO₄、NaH₂PO₄、K₂Cr₂O₇、EDTA二钠盐存在下,超声波辅助CS-nZⅥ对酸性品红（AF）降解的影响。结果表明,反应15 min,0.01 g CS-nZⅥ对25 mL、100 mg/L AF的去除率高达99.9%;各种助剂的存在使得纳米铁表面不同程度失活,阻碍反应的进行,使得AF的去除率下降。NaNO₃、K₂Cr₂O₇、EDTA二钠盐与纳米铁发生反应,与AF存在明显的竞争作用。重复利用实验表明,CS-nZⅥ重复利用7次仍具有一定的反应活性。此外,CS-nZⅥ对加标（50 mg/L）实际废水中AF的去除率达到99%以上,表明CS-nZⅥ是一种潜在的环境修复材料。     

城市污水污泥固结体重金属浸出毒性及路用性能研究

城市污水污泥的重金属离子Pb、Zn超过国家固体废弃物排放最高允许值,属于危险废物。污水污泥的最佳出路是无害化处理,资源化利用,产业化发展。研究了以上海市污水污泥为原料,加入一定比例的固化剂和矿物掺合料使之固结,经养护满足路用强度性能,测试其固结体重金属离子浸出质量浓度亦满足国家固体废弃物排放标准,即污泥中的重金属离子得到有效的束缚和稳定固化,既解决了环境问题,又为污泥产业化发展开辟了新的途径。     

Ex situ remediation of contaminated sediments using mineral additives: assessment of pollutant bioavailability with the Microtox solid phase test

The aim of this work is to assess the potential ecotoxicological effects of contaminated sediments treated with mineral additives. The Microtox solid phase test was used to evaluate the effect of mineral additives on the toxicity of sediment suspensions. Four Mediterranean port sediments were studied after dredging and bioremediation: Sample A from navy harbor, sample B from commercial port and samples C and D from pleasure ports. Sediment samples were stabilized with three mineral additives: hematite, zero-valent iron and zeolite. Results show that all studied mineral additives can act as stabilizer agent in highly contaminated sediments (A and C) by decreasing dissolved metal concentrations and sediment toxicity level. On the contrary, for the less contaminated samples (B and D) hematite and zeolite can provoke toxic effect towards Vibrio fischeri since additive particles can favor bacteria retention and decrease bioluminescence emission.     

Gasoline-derived methyl tert-butyl ether as a potential obesogen linked to metabolic syndrome

<正>The power and efficiency of gasoline engines is often improved through the use of fuel with high octane ratings.The octane rating of fuel could be further increased with oxygenate additives such as alcohols and ethers, with methyl tert-butyl ether (MTBE) being one of the most common gasoline additives. The Agency for Toxic Substances and Disease     

Multi-factor principle for electrolyte additive molecule design for facilitating the development of electrolyte chemistry

When I read the paper"Electrolytes enriched by potassium perfluorinated sulfonates for lithium metal batteries"from Prof. Jianmin Ma's group, which was published in Science Bulletin (doi.org/10.1016/j.scib.2020.09.018), I felt excited as presented a multi-factor principle for applying potassium perfluorinated sulfonates to suppress the dendrite growth and protect the cathode from the viewpoint of electrolyte additives. The effects of these additives are revealed through experimental results, molecular dynamics simulations and first-principle calculations. Specifically, it involves the influence of additives on Li+ solvation structure, solid electrolyte interphase (SEI), Li growth and nucleation. Following the guidance of the multi-factor principle, every part of the additive molecule should be utilized to regulate electrolytes. This multi-factor principle for electrolyte additive molecule design (EAMD) offers a unique insight on understanding the electrochemical behavior of ion-type electrolyte additives on both the Li metal anode and high-voltage cathode. In these regards, I would be delighted to write a highlight for this innovative work and, hopefully, it may raise more interest in the areas of electrolyte additives.     

Investigation of Nanoparticle Additives to Biodiesel for Improvement of the Performance and Exhaust Emissions in a Compression Ignition Engine

Worldwide energy demand has been growing steadily during the past five decades and most experts believe that this trend will continue to rise. The amount of emitted harmful emission gases increases in parallel with increasing energy consumption. This increase has forced many countries to take various precautions, and various restrictions on emitted emissions have been carried. In this study, effects of addition of oxygen containing nanoparticle additives to biodiesel on fuel properties and effects on diesel engine performance and exhaust emissions were investigated. Two different nanoparticle additives, namely MgO and SiO₂, were added to biodiesel at the addition dosage of 25 and 50 ppm. Fuel properties, engine performance, and exhaust emission characteristics of obtained modified fuels were examined. As a result of this study, engine emission values NO_x and CO were decreased and engine performance values slightly increased with the addition of nanoparticle additives.     

Mechanical Properties with the Functional Group of Additives for Starch/PVA Blend Film

This paper deals with the mechanical properties and degree of swelling (DS) of starch/PVA blend film with the functional groups i.e., hydroxyl and carboxyl group, of additives. Starch/PVA blend films were prepared by using the mixing process. Glycerol (GL) with 3 hydroxyl group, sorbitol (SO) with 6 hydroxyl group, succinic acid (SA) with 2 carboxyl group, malic acid (MA) with 1 hydroxyl and 2 carboxyl group, tartaric acid (TA) with 2 hydroxyl and 2 carboxyl group and citric acid (CA) with 1 hydroxyl and 3 carboxyl group were used as additives. The results of measured tensile strength (TS) and elongation (%E) verified that both hydroxyl and carboxyl group as a functional groups increased the flexibility and strength of the film. Values of DS for GL-added and SA-added films were low. However, DS values of the films added MA, TA or CA with both hydroxyl and carboxyl group were comparatively high. When the film was dried at low temperature, the properties of the films were evidently improved. The reason is probably because the hydrogen bonding was activated at low temperature.     

橡胶助剂析出的原因及防治探析——以武警现行列装鞋靴产品为例

橡胶助剂析出是橡胶制品的常发问题,本文从原料、配方设计、炼胶工艺、硫化工艺、存储条件等方面分析了武警现行鞋靴橡胶助剂析出的原因、形式及危害,提出了防治对策。     

湿法脱硫系统中液相二价汞的还原抑制

湿法脱硫系统协同脱汞是当前燃煤烟气脱汞的重要方法,而进入脱硫系统的二价汞还原问题会降低汞的脱除效率,从而限制该方法的使用。在脱硫浆液中添加添加剂捕集和稳定二价汞能有效抑制二价汞的还原。在模拟浆液条件下考察多硫化钙、TMT、乙基黄原酸钠、EDTA和腐殖酸对液相二价汞的还原抑制效果。结果表明,多硫化钙和TMT能极大的抑制二价汞的还原,当其添加量分别为0.004%(体积分数)和0.002%(体积分数)时,汞还原量仅为未添加条件下的3.3%和0.8%,而乙基黄原酸钠、EDTA和腐殖酸在一定条件下不仅不会抑制二价汞的还原,反而会一定程度促进二价汞的还原。这表明乙基黄原酸钠、EDTA和腐殖酸并不适合于作为液相二价汞的还原抑制剂。