Mechanism and catalytic performance for direct dimethyl ether synthesis by CO2 hydrogenation over CuZnZr/ferrierite hybrid catalyst

Direct synthesis of dimethyl ether(DME) by CO_2 hydrogenation has been investigated over three hybrid catalysts prepared by different methods:co-precipitation,sol-gel,and solid grinding to produce mixed Cu,ZnO,ZrO_2 catalysts that were physically mixed with a commercial ferrierite(FER) zeolite.The catalysts were characterized by N_2 physisorption,X-ray diffraction(XRD),transmission electron microscopy(TEM),X-ray photoelectron spectroscopy(XPS),temperature programmed desorption of CO_2(CO_2-TPD),temperature programmed desorption of NH_3(NH_3-TPD),and temperature programmed H2 reduction(H_2-TPR).The results demonstrate that smaller CuO and Cu crystallite sizes resulting in better dispersion of the active phases,higher surface area,and lower reduction temperature are all favorable for catalytic activity.The reaction mechanism has been studied using in situ diffuse reflectance infrared Fourier transform spectroscopy(DRIFTS).Methanol appears to be formed via the bidentate-formate(b-HCOO) species undergoing stepwise hydrogenation,while DME formation occurs from methanol dehydration and reaction of two surface methoxy groups.     

钢铁企业富余煤气制甲醇与二甲醚的研究

利用钢铁联合企业的富余煤气,制甲醇与二甲醚.提出合理可行的工艺方案,进行主要物料消耗计算和成本估算,得出在工艺上和经济上可行的结论.项目的实施,能实现钢铁联合企业资源综合利用,提高企业的经济效益,同时对实现能源的多样化、发展新型清洁能源、改善生态环境都具有重要意义,其经济效益和社会效益显著.     

我国城市污泥中醚类和卤代烃类有机污染物的初步研究

应用GC／MS联机检测技术对我国大陆和香港共11个城市污泥中4种醚类和4种卤代烃类化合物进行分析。结果表明，醚类化合物的总含量在0－7．743mg/kg之间，以双（2－氯异丙基）醚为主，主要分布在兰州污泥和广州污泥中；卤代烃类化合物的总含量在0．007－3．237mg/kg之间，以六氯环戊二烯为主，主要分布在兰州污泥、佛山污泥和沙田（香港）污泥中。污泥中醚类和卤代烃类化合物的种类及其含量与污水来源、污水处理方式、污泥类型、化合物的结构和理化性质等因素有关。     

ABR工艺预处理木薯酒糟废水的工程应用

木薯酒糟废水有机物浓度高、悬浮物含量大、pH呈酸性、可生化性能较差 ,通常直接采用固液分离—厌氧 (UASB)—好氧曝气生化法处理效果并不理想 ,而采用ABR工艺进行厌氧水解酸化预处理木薯酒糟废水迄今为止未见报道。经绵阳市酒厂废水治理工程证明 ,强化ABR预处理工序是保证后续处理措施能否正常运行的关键     

共生细菌SB1降解聚乙烯醇的研究Ⅱ．共生细菌SB1聚乙烯醇氧化酶的产生、纯

共生细菌ＳＢ１接种在０．３％聚乙烯醇培养堪中，３０℃摇床振荡培养或发酵罐通气培养时，ＰＶＡ氧化酶产生的高峰在４８ｈ或４０ｈ。离心收集的上清液采用４０％－５０％饱和度的硫酸铵分级沉淀ＤＥＡＤ－Ｓｅｐｈａｄｅｘ离子交换柱和Ｃｉｂａｃｒｏｎ蓝Ｓ－Ｓｅｐｈａｒｏｓｅ４Ｂ亲和柱层析等纯化步骤。ＰＶＡ氧化酶收得率３０％，比活力提高３０倍。     

相对速率法测氯原子与一系列低碳醇的反应速率常数

在 2 92± 1K温度和 1 0 1× 10 5Pa压力下 ,以丙烷为参照物 ,采用相对速率方法测定了一系列醇与氯原子在气相中的反应速率常数 ,这些醇与氯的反应速率常数分别为 (单位 :10 7m3·mol-1·s-1) :甲醇k1=3 2 9,乙醇k2 =6 14,正丙醇k3=8 97,异丙醇k4 =4 0 0 ,正丁醇k5=11 7,异丁醇k6=12 5 ,叔丁醇k7=2 0 5 ,正戊醇k8=15 8,异戊醇k9=12 3     

含PVA印染废水的生化动力学研究及其应用

通过对含有聚乙烯醇(PVA)印染废水的生化降解动力学的研究,确定表征微生物生长繁殖、自身氧化等的动力学参数,以此作为生化处理工艺设计的重要依据,使之更符合废水的水质特点,从而提高处理效率;同时,通过掌握其处理过程的规律,为工艺管理、运行效果预测,提供比较明确的控制量。     

镉铅对小麦醇脱氢酶(ADH)基因表达影响的初步研究

经过镉，铅４５ｈ污染处理，运用Ｎｏｒｔｈｅｉｎ斑点杂分析和酶活性测定的方法探测萌发期小麦ＡＤＨ酶基因的表达情况。实验结果表明，ＡＤＨ基因表达在ＲＮＡ和酶活性两个层次均有变化，并且呈现相似的变化趋势，反映得金属的影响是来源于基因转录水平。     

工程菌处理高纯二甲醚生产废水的研究

工程菌LEY7是以假单胞菌D3 菌株 (Pseudomonassp.D3 )为受体 ,以缓慢牙孢杆菌 3RM2 菌株 (Bacilluslentus 3RM2 ) ,假单胞菌W1 (Pseudomonassp .W1 )和W2 (Pseudomonassp .W2 )为供体 ,用多基因转化原生质球构建而成。工程菌LEY7能同时降解 4种化合物。用工程菌LEY7处理化工废水 ,工艺采用二级氧化。处理效果 :进水COD =10 0 0mg/L ,处理后出水COD在 10 0mg/L以下。COD去除率达到 90 %以上。     

Starch, Poly(lactic acid), and Poly(vinyl alcohol) Blends

Research on biodegradable materials has been stimulated due to concern regarding the persistence of plastic wastes. Blending starch with poly(lactic acid) (PLA) is one of the most promising efforts because starch is an abundant and cheap biopolymer and PLA is biodegradable with good mechanical properties. Poly(vinyl alcohol) (PVOH) contains unhydrolytic residual groups of poly(vinyl acetate) and also has good compatibility with starch. It was added to a starch and PLA blend (50:50, w/w) to enhance compatibility and improve mechanical properties. PVOH (M_W 6,000) at 10%, 20%, 30%, 40%, 50% (by weight) based on the total weight of starch and PLA, and 30% PVOH at various molecular weights (M_W 6,000, 25,000, 78,000, and 125,000 dalton) were added to starch/PLA blends. PVOH interacted with starch. At proportions greater than 30%, PVOH form a continuous phase with starch. Tensile strength of the starch/PLA blends increased as PVOH concentration increased up to 40% and decreased as PVOH molecular weight increased. The increasing molecular weight of PVOH slightly affected water absorption, but increasing PVOH concentration to 40% or 50% increased water absorption. Effects of moisture content on the starch/PLA/PVOH blend also were explored. The blend containing gelatinized starch had higher tensile strength. However, gelatinized starch also resulted in increased water absorption.