Review: recent advances in biogas purifying technologies

Biomethane production through biogas upgrading is a promising renewable energy for some industries which could be part of the equilibrium needed with fossil fuels consumption to achieve a sustainable society. This paper presents a comprehensive list of biogas upgrading technologies focused on carbon dioxide removal as well as recent advances reported by researcher with wide expertise in this topic. Additionally, an extensive costs–performance comparison among the technologies studied is discussed. Among the different alternatives, chemical scrubbing stood out to achieve high biomethane purities while cryogenic technologies proved to be effective against methane losses. Regarding the different costs, water scrubbing and membrane separation seem to be the most affordable techniques.     

重金属离子对肺表面活性物质单层膜的影响

为了探究重金属对肺表面活性物质（PS）膜的影响,利用Langmuir–Wilhelmy膜天平,研究了不同种类和浓度的重金属离子与PS单层膜的相互作用.发现Cr³⁺、Cu²⁺、Hg²⁺、Pb²⁺、Cd²⁺、Ni²⁺6种重金属离子均使PS单层的π-A等温线G-LE相变阶段外扩,而Fe³⁺可诱导单层缩合.随后,选取Cd²⁺,Cu²⁺,Hg²⁺,Fe³⁺4种离子进一步探究了重金属浓度对PS单层膜表面活性的影响规律,进行了可压缩模量分析,并结合红外光谱（FTIR）和原子力显微镜（AFM）探究其作用机理,发现Cu²⁺,Fe³⁺和Hg²⁺均会以浓度依赖的方式与PS单层的极性头部发生络合作用,形成复合物,改变膜的稳定性;而Cd²⁺的影响明显弱于其他3种金属离子,但也能使得PS单层有序性增强.     

石墨炉原子吸收光谱法测定海河下游水中痕量镉

原子吸收光谱法直接测定高盐水中痕量镉时，有很大背景吸收和误差。本文采用络合—萃取技术使共存元素与待测元素分离，既消除了基体干扰，又达到了富集作用，使测定结果准确可靠。     

湿法吸收测定大气中的五氧化二磷

用２％ＮａＯＨ溶液吸收大气中的Ｐ２Ｏ５，用钼锑抗试剂显色定量。对样品的稳定性、方法的显色条件、精密度、准确度以及检出限进行反复试验，结果令人满意。     

螯合树脂在线富集——火焰原子吸收光度法测定水中微量Cu,Pb,Zn,Cd

对螯合树脂在线富集，火焰原子吸收光度法进行了条件试验。试验证实方法对Ｃｕ、Ｐｂ、Ｚｎ、Ｃｄ４个元素检出浓度可达μｇ／Ｌ级，校准曲线性、样品重现性及准确度可满足测定要求。     

火焰原子吸收分光光度法测定鱼内脏及河流底泥中的铜

采用火焰原子吸收分光光度法测定鱼内脏及河流底泥中的铜。鱼内脏经组织捣碎机捣成匀浆后，加硝酸消解；底泥则经氢氟酸和高氯酸消化。该方法具有灵敏度高，精密度和回收率较好等特点。     

Comparison of Two Manual Methods of Nitrogen Dioxide Determination in Ambient Air

Sodium arsenite (modified Jacobs and Hochheiser method; hereafter referred as SA), the most widely used manual monitoring method for determination of nitrogen dioxide (NO₂) in ambient air, particularly in developing countries has been evaluated and compared with US EPA recommended equivalent method of TGS-ANSA (hereafter referred as ANSA). NO₂ concentrations generated from laboratory test atmosphere were analyzed by these two methods and were compared statistically. Laboratory evaluations showed that SA method has high sensitivity to different sampling conditions, which normally vary during actual field monitoring. Hence, correction factors for absorption efficiency were estimated for SA and ANSA methods. Absorption efficiency of NO₂ in SA method was found to be much lower (64%) as against the reported value of 82% at the method recommended sampling conditions, whereas for ANSA method, it was found 1.0 as against the reported value of 0.93. After applying derived correction factors, both the methods produced almost similar concentration values of NO₂.     

冷凝吸附法测定痕量挥发性含硫气体

采用冷凝吸附法对痕量挥发性含硫气体的测定进行了研究 ,结果表明自行设计的冷凝吸附装置对于痕量挥发性含硫气体的富集有着良好的效果 ,富集效率可达 94%以上     

Cu、Pb、Zn火焰原子吸收多谱线分析在环境监测中的应用

对铜的 3条谱线 (2 49.2 nm、2 61 .4nm,3 2 4.8nm ) ,铅的 2条谱线 (2 83 .3 nm、2 1 7.0 1 nm )以及锌的 2条谱线(3 0 7.6nm、2 1 3 .9nm ) ,共 7条谱线的灵敏度、检测限、线性范围进行了归纳性总结 ,并对多种共存元素可能存在的干扰情况进行了研究 ,认为利用元素不同分析谱线的分析灵敏度差异 ,根据被测元素在样品消解液中含量 ,选择合适的谱线进行分析 ,既降低工作强度 ,又能获得满意结果     

微波高压络合消解石墨炉原子吸收分光光度法测定环境空气中锑

用有机滤膜采集空气中颗粒物样品,用微波高压络合消解后制成样品溶液。用石墨炉原子吸收分光光度法可确定样品溶液中锑的浓度。该方法具有对有机滤膜和样品消解完全,省时,无损失,灵敏度高,准确度、精密度好等特点。