Analysis of the Trend and Seasonal Cycle of Carbon Monoxide Concentrations in an Urban Area (4 pp)

Background, Aim and Scope Air quality is an field of major concern in large cities. This problem has led administrations to introduce plans and regulations to reduce pollutant emissions. The analysis of variations in the concentration of pollutants is useful when evaluating the effectiveness of these plans. However, such an analysis cannot be undertaken using standard statistical techniques, due to the fact that concentrations of atmospheric pollutants often exhibit a lack of normality and are autocorrelated. On the other hand, if long-term trends of any pollutant’s emissions are to be detected, meteorological effects must be removed from the time series analysed, due to their strong masking effects. Materials and Methods The application of statistical methods to analyse temporal variations is illustrated using monthly carbon monoxide (CO) concentrations observed at an urban site. The sampling site is located at a street intersection in central Valencia (Spain) with a high traffic density. Valencia is the third largest city in Spain. It is a typical Mediterranean city in terms of its urban structure and climatology. The sampling site started operation in January 1994 and monitored CO ground level concentrations until February 2002. Its geographic coordinates are W0°22′52″ N39°28′05″ and its altitude is 11 m. Two nonparametric trend tests are applied. One of these is robust against serial correlation with regards to the false rejection rate, when observations have a strong persistence or when the sample size per month is small. A nonparametric analysis of the homogeneity of trends between seasons is also discussed. A multiple linear regression model is used with the transformed data, including the effect of meteorological variables. The method of generalized least squares is applied to estimate the model parameters to take into account the serial dependence of the residuals of this model. This study also assesses temporal changes using the Kolmogorov-Zurbenko (KZ) filter. The KZ filter has been shown to be an effective way to remove the influence of meteorological conditions on O₃ and PM to examine underlying trends. Results The nonparametric tests indicate a decreasing, significant trend in the sampled site. The application of the linear model yields a significant decrease every twelve months of 15.8% for the average monthly CO concentration. The 95% confidence interval for the trend ranges from 13.9% to 17.7%. The seasonal cycle also provides significant results. There are no differences in trends throughout the months. The percentage of CO variance explained by the linear model is 90.3%. The KZ filter separates out long, short-term and seasonal variations in the CO series. The estimated, significant, long-term trend every year results in 10.3% with this method. The 95% confidence interval ranges from 8.8% to 11.9%. This approach explains 89.9% of the CO temporal variations. Discussion The differences between the linear model and KZ filter trend estimations are due to the fact that the KZ filter performs the analysis on the smoothed data rather than the original data. In the KZ filter trend estimation, the effect of meteorological conditions has been removed. The CO short-term componentis attributable to weather and short-term fluctuations in emissions. There is a significant seasonal cycle. This component is a result of changes in the traffic, the yearly meteorological cycle and the interactions between these two factors. There are peaks during the autumn and winter months, which have more traffic density in the sampled site. There is a minimum during the month of August, reflecting the very low level of vehicle emissions which is a direct consequence of the holiday period. Conclusions The significant, decreasing trend implies to a certain extent that the urban environment in the area is improving. This trend results from changes in overall emissions, pollutant transport, climate, policy and economics. It is also due to the effect of introducing reformulated gasoline. The additives enable vehicles to burn fuel with a higher air/fuel ratio, thereby lowering the emission of CO. The KZ filter has been the most effective method to separate the CO series components and to obtain an estimate of the long-term trend due to changes in emissions, removing the effect of meteorological conditions. Recommendations and Perspectives Air quality managers and policy-makers must understand the link between climate and pollutants to select optimal pollutant reduction strategies and avoid exceeding emission directives. This paper analyses eight years of ambient CO data at a site with a high traffic density, and provides results that are useful for decision-making. The assessment of long-term changes in air pollutants to evaluate reduction strategies has to be done while taking into account meteorological variability     

加压活性炭生物膜法处理DSD有机废水

采用加压活性炭生物膜法处理以对硝基甲苯磺酸盐为主的难降解的有机废水的研究,是在活性炭生物膜法处理有机废水基础上发展起来的新技术。本实验结果表明,在加压9.8×10~4Pa(1kgt/cm~2)的条件下,COD_(Cr)去除率为62％～70％,比常压活性炭生物膜法高20％～25％;其容积负荷Nv=1.7～2.9kgCOD/m~3·d,比一般活性污泥法高3～6倍。     

楚雄市饮用水源水质分析与保护措施

介绍了楚雄市饮用水源的水质情况,分析了饮用水源地主要污染源及水环境问题,并初步提出了环保对策与措施。     

MODELING SEDIMENT AND PHOSPHORUS LOSSES IN AN AGRICULTURAL WATERSHED TO MEET TMDLs1

ABSTRACT: This paper studies the effectiveness of alternative farm management strategies at improving water quality to meet Total Maximum Daily Loads (TMDLs) in agricultural watersheds. A spatial process model was calibrated using monthly flow, sediment, and phosphorus (P) losses (1994 to 1996) from Sand Creek watershed in south‐central Minnesota. Statistical evaluation of predicted and observed data gave r² coefficients of 0.75, 0.69, and 0.49 for flow (average 4.1 m³/s), sediment load (average 0.44 ton/ha), and phosphorus load (average 0.97 kg/ha), respectively. The calibrated model was used to evaluate the effects of conservation tillage, conversion of crop land to pasture, and changes in phosphorus fertilizer application rate on pollutant loads. TMDLs were developed for sediment and P losses based on existing water quality standards and guidelines. Observed annual sediment and P losses exceeded these TMDLs by 59 percent and 83 percent, respectively. A combination of increased conservation tillage, reduced application rates of phosphorus fertilizer, and conversion of crop land to pasture could reduce sediment and phosphorus loads by 23 percent and 20 percent of existing loads, respectively. These reductions are much less than needed to meet TMDLs, suggesting that control of sediment using buffer strips and control of point sources of phosphorus are needed for the remaining reductions.     

基于ArcIMS的旅游安全管理系统

结合旅游业的特点,即综合性、敏感性、涉外性或国际性,提出旅游安全管理系统应该包括:灾前的防范系统、灾时的抗灾系统以及灾后的评估善后系统3大部分的设计思路。将相应的旅游重大危险源监控系统的功能定为:以行政监察、社会监督、行业自律和应急救援体系为主的宏观管理系统。阐述了Web GIS的优点并推荐了一种构建Web GIS的新技术———ArcIMS,利用ArcIMS的系统构建的旅游安全管理系统具有功能健全、管理方便、系统成熟和安全可靠的诸多优点;同时整个系统的构建相对于其他Web GIS系统的开发而言,技术难度比较低、开发速度比较快,而且系统运行相对稳定,减轻了系统维护的负担。最后,结合旅游安全信息流的特点,具体阐述了运用ArcIMS作为旅游安全管理系统的平台的合理性和可行性。     

常州市臭氧污染传输路径和潜在源区

利用NCEP全球再分析资料和HYSPLIT4模式,计算了2013—2015年常州市臭氧(O_3)超标日的气流后向轨迹。结合聚类分析方法和常州市PM2.5、PM10、SO2、NO2、O_3数据,分析了O_3超标日不同类型气团来源对各污染物浓度的影响,并利用引入权重因子后的潜在污染源贡献函数分析了影响常州市O_3超标的潜在污染源区分布特征。结果表明:常州市O_3超标期间易受到东南和西南方向气流影响,其中从东海和黄海途经浙江东北部、上海、江苏南部等地的东南气流占比达50%以上。自内陆途经黄山-湖州-宜兴到常州的气流对应的O_3平均质量浓度最高,为116μg/m3。自山东经枣庄-宿迁-淮安-泰州-苏州-无锡到常州的气流对应的O_3平均质量浓度最低,为78μg/m3,但该气流对应的SO2和NO2平均值为各聚类中的最高。影响常州市O_3的潜在污染源区主要在常州周边200 km以内的区域,且集中在从南京至上海的长江下游沿线区域和杭州湾区域;其中太湖湖区为重点污染源源区之一。O_3超标日影响常州NO2的潜在污染源区主要集中在江苏南部、浙江东北部和上海3个区域,太湖周边的常州、无锡、苏州和湖州等几个临近城市为潜在的重点污染源区。与影响常州O_3的WPSCF高值区相比,影响NO2的高值区分布范围更大、距离更远。影响常州O_3的潜在污染源区分布,与长江三角洲地区人为源大气污染物的高排放区域较为一致,说明长江三角洲地区的O_3污染与本区域的人为源大气污染物排放有着极为密切的关联。     

碳市场发电行业配额分配方法分析及优化建议

碳排放配额的初始分配是碳市场制度体系中的重要组成部分,公平、科学、可操作的配额分配方法与配额管理体系是保证碳市场健康运行的基石.由于排放量高、工艺流程简单且数据基础较好,中国试点碳市场与全国碳市场均优先将发电行业纳入配额管理,出台既有共性又兼具差异的配额分配方法.通过对比发电行业配额分配方法,总结对于机组分类、修正系数、产品计量和配额结转等关键问题的处理方式,发现全国碳市场第一个履约周期配额分配存在发放时间滞后、缺少结转规定、缺乏调控机制和方法尚不完善等问题.建议从方法和管理两方面完善发电行业配额分配制度,包括建立配额总量约束、明确配额结转规定、完善掺烧机组配额核定方法和优化修正系数的选取并适时引入有偿分配制度.     

青岛海洋环境碳纤维复合材料与低合金钢电偶腐蚀研究

目的 探究碳纤维复合材料在舰船应用时与金属材料的电偶腐蚀问题。方法 针对一种典型舰船用碳纤维增强乙烯基树脂复合材料,在青岛海洋大气环境下开展0.5、1、1.5、2 a期的自然曝晒试验,进而采用电化学分析手段考察其与低合金钢的电偶腐蚀效应,结合老化机制探究碳纤维复合材料的老化行为对其与钢电偶腐蚀的影响。结果及结论 在青岛大气环境曝晒不同周期的复合材料试样,开路电位与低合金钢相差较大,存在较高的电偶腐蚀倾向。随曝晒时间的延长,复合材料表面微裂纹不断产生、扩展,导致电化学反应活性点增多,两者电偶电流密度随之增大。在青岛海洋大气环境下暴露2 a后,碳纤维增强乙烯基树脂复合材料与低合金钢的电偶电流为0.356 9 μA/cm²,两者的电偶腐蚀敏感性达到B级。     

郑州市民运会期间大气PM2.5改善效果评估

利用2019年8月5日至9月30日大气污染物和颗粒物组分在线数据,评估郑州市少数民族运动会空气质量管控效果.根据政府管控措施的实施时间,将研究时期分为管控前(8月5～24日)、管控中(8月25日至9月18日)和解除管控后(9月19～30日).相较管控前,管控中PM_2.5平均浓度增加2.3μg·m^-3,解除管控后PM_2.5的浓度增加了11.7μg·m^-3,解除管控后PM_2.5浓度增幅高于管控中,表明管控措施对颗粒物有显著的减排效果.从颗粒物组分来看,研究期间郑州市主要组分依次是有机物、硝酸根、铵根、硫酸根和地壳元素.相比于管控前,管控期间PM_2.5组分中有机物和硝酸根占比分别上升3.9%和0.9%,硫酸根、铵根和地壳元素的占比下降了1.1%、 1.9%和2.2%.利用正定矩阵因子分解法解析颗粒物来源,结果表明二次硫酸、二次硝酸、二次有机气溶胶、机动车源、工艺过程源、扬尘和燃煤是PM_2.5主要来源.管控对一次源中的扬尘、燃煤和工业效果显著...     

固定源排污许可证监测管理制度研究

依靠排污许可证管理,固定源执行由行业排放标准为主正逐步过渡到"国家行业排放标准——单一源排放标准"双层排放标准,并以执行更全面和精准的单一源排放标准为主,对应的监测要求及考核方式更加多样化。对监测管理制度进行设计,明确固定源制定自行监测方案和守法监测的主体责任,厘清许可证核发部门、属地监测、执法部门的监管职责。系统设计"固定源制定并提交自行监测方案-核发部门审核-方案纳入排污许可证中成为规定-依规定自行监测和记录-固定源提交执行报告-监管部门审计式审核-执法监测和执法检查"的全过程管理机制,设计标准化的监管计划程序落实证后监管与执法监测,明晰监管部门的有限责任。