Combined influence of food level and inoculation density on competition between <Emphasis Type="Italic">Anuraeopsis fissa</Emphasis> and <Emphasis Type="Italic">Brachionus patulus</Emphasis> or <Emphasis Type="Italic">Brachionus macracanthus</Emphasis> (Rotifera: Brachionidae)

We tested separately the effect of two taxonomically related rotifers (B. patulus and B. macracanthus) on the population dynamics of another species (A. fissa) at low (0.5 ×10 ⁶) and high food levels (1.5 × 10⁶ cells/ml of Chlorella vulgaris) using different inoculation densities (0–100%). We also quantified the impact of A. fissa on the two brachionid species. Regardless of the presence of the competing species, an increase in the availability of food led to increase in the abundances of the three rotifers. The population growth of B. patulus, B. macracanthus, or A. fissa was affected negatively when cultured together with another species. An increase in the initial density of any one of the competing species became advantageous to maintain a certain population size. At a low algal food level, B. patulus was able to suppress A. fissa more strongly than B. macracanthus. On the other hand, at a high food level, B. macracanthus suppressed the population of A. fissa more strongly than B. patulus. Peak population densities for A. fissa varied from about 150 to 1000 ind./ml, depending on food density and the presence of competitors. The rate of population increase (r) of A. fissa, B. patulus, and B. macracanthus increased with an increase in food availability but decreased with increasing initial density of the competitor. Both Brachionus spp. experienced negative growth rates in the presence of A. fissa, especially at a high initial density of the latter. Published in Russian in Ekologiya, 2007, Vol. 38, No. 5, pp. 381–390. The article was submitted by the authors in English.     

岷江上游崩塌滑坡分布规律研究

岷江为长江—级支流，上游长３３０ｋｍ，自１９８６年以来，发生崩塌滑坡２００余处，体积约２．１亿ｍ￣３。作者研究了岷江上游崩塌滑坡的分布规律。采用统计指标法，将岷江上游分为三种不同的崩塌滑坡分布密度区：①ＵＸＳ．高密度区；②ＭＸＳ，中密度区；③ＬＸＳ＿３低密度区。     

Pt-Sn/Al2O3蜂窝催化剂催化氧化C6烃

采用等体积分浸法制备Pt-Sn/Al₂O₃蜂窝催化剂（Pt含量仅为0.06wt%）.运用X射线衍射（XRD）、透射电镜（TEM）等技术对催化剂理化性质进行表征,并选取4种代表性C₆烃（苯、环己酮、环己烷和正己烷）对催化剂性能进行评价.活性评价试验中,Pt/Sn比为3/1催化效果最佳.此时4种C₆烃转化率达到90%的温度（T₉₀）较Pt催化剂均降低约20℃,其原因在于Sn可将Pt分割为较小的团簇提高Pt分散度.寿命评价试验以环己烷为例同Pt-Sn蜂窝催化剂连续运行720h,催化活性无明显变化,其原因在于,Sn可有效抑制其粒径增长;Pt₃Sn合金降低表面对C₆烃的吸附,减少催化剂表面积炭.     

石英灯辐射加热条件下低密度碳/酚醛复合材料高温响应及分析

目的研究低密度碳/酚醛复合材料在不同地面加热实验测试响应的差异性,指导材料在实际应用环境下的高温响应分析。方法对低密度碳/酚醛复合材料开展了热流为400 kW/m~2的单侧石英灯辐射加热实验,利用热电偶测温系统测量试件在加热过程中不同位置的温度时间历程,并对试件的烧蚀形貌和微观结构进行观测。同时与热流为464k W/m~2的氧乙炔加热陶瓷板辐射加热实验结果进行对比分析,并且采用有限元方法对材料的传热传质多场耦合计算进行分析。结果对于石英灯辐射加热,在测量点升温到接近200℃时,温度响应拐点都依次出现。由于加热的辐射热源不同,在不同的辐射波段下,多孔材料吸收和发射的热量不同,短时间内氧乙炔加热陶瓷板辐射加热使材料内部升温速率比石英灯辐射加热实验的要快,但长时间加热时现象刚好相反。结论进行传热传质多场耦合计算材料高温响应时,合理确定材料宏观性能随温度的变化至关重要。     

水质中高浓度挥发酚的预测

提出一种以溴水预测法确定高浓度挥发酚稀释倍数 ,为高浓度水样提供了一种科学准确的操作分析方法。简单快速 ,并能确保高浓度挥发酚水样分析的可靠性与成功性 ,具有很大的应用和推广价值     

IMPACTS OF VISITORS ON SOIL AND VEGETATION OF THE RECREATIONAL AREA “NACIMIENTO DEL RÍO MUNDO” (CASTILLA-LA MANCHA, SPAIN)

This study examines the effects of recreational use on the soil and vegetation at a site of ecological importance (Nacimiento del Río Mundo, Albacete, Spain). The most visited sites showed increased soil compaction of approximately 50%, bare ground increase to 61 ± 10% and a decrease in richness (from 25 ± 2 to 15 ± 2 species), diversity (from 4.0 ± 0.1 to 2.7 ± 0.4) and stratification of plant species (from 80 ± 11 to 21 ± 4%). The most visited sites had 90% less plant species as compared to the least visited. Intense use was associated with the presence of nitrophilous plant and vegetal species with a morphology adapted to heavy trampling. The recreational areas showed a distribution pattern of impact radiating outwards from the most used and degraded point. At the most visited point, Los Chorros (the spring of the river), the impact radiated outwards for about 20 m. A pilot experiment examining the effects of one-year restriction to visitors for access to a formerly impacted area showed a plant cover increase by anthropic and not by native species of 57 percent units.     

温压工艺中聚合物添加剂的加入方式

采用温压技术制备铁基粉末冶金材料,研究了干混和湿混两种聚合物添加剂加入方式及压制温度对生坯和烧结体性能的影响,并对其作用机理进行了探讨.试验结果表明,干混混合粉生坯及烧结体的性能略高于湿混混合粉生坯及烧结体的性能,但前者的最佳压制温度范围略高.     

中─高级变质相中水热流体的形成与作用

固体地壳中流体是普遍存在的，中—高级变质相中的矿物并非只发生晶体塑性变形，溶解和溶移作用在非糜棱岩化岩石中占主导地位，因为高温高压环境下存在的水热流体，在变质变形作用中起着至关重要的作用。在周围分布有网络状进进剪切带的递进缩短带中，与应交梯度有直接关系的单个矿物的位错密度梯度在其晶体边缘形成，产生了化学位梯度，从而使矿物边缘发生溶解。变形分解作用是产生这一过程的动力，并为流体汇聚形成水热循环系统提供了空间。     

人工林经营过程密度最优控制研究

在连续状态动态规划方法建立的人工林种群密度决策模型的基础上，首次提出应用遗传算法优化人工林林分经营过程的间伐时间和主伐时间的最优组合方案，并阐明其数学模型和具体方法。杉木人工林经营过程的密度最优控制方案优化实例表明，用遗传算法优化能收到良好效果。优化结果表明，杉木人工林经营过程中以间伐两次为最优，第一次在１１～１２年，第二次在１５～１８年，而主伐年龄以２５年为最优。     

填埋场垃圾堆体平面压实工程试验研究

原生垃圾密度很小，为提高填埋垃圾堆体密实度、延长填埋场使用寿命，对填埋垃圾进行压实处理很重要。本文通过现场工程试验对影咱填埋垃圾堆体平面压实效果的主要因素进行了系统研究。实验结果表明：为取得最佳的垃圾堆体平面压实效果，最佳垃圾摊铺厚度在0.5m—0.7m之间，最佳机械行程次数为3次，增加碾压次数有利于提高垃圾堆体密实度，垃圾最佳含水率在30％——50％之间。