Safety assessment of the film boiling chemical vapor infiltration (FB-CVI) process through a system-theoretic accident model and process (STAMP)

Film boiling chemical vapor infiltration (FB-CVI) is considered as one of the fastest process methodologies for manufacturing carbon-carbon (C–C) composite products and possesses various advantages compared to conventional methodologies. However, there are safety concerns associated with this process for large-scale manufacturing, mainly owing to the intrinsic nature of the precursor and the process conditions. Considering the multifunctional interactions of the various systems during the process, a system-theoretic process analysis (STPA)/system theoretic accident model and process (STAMP) model is used to perform a safety analysis of the hazardous states of the FB-CVI process at the system level. As a case study, the FB-CVI process equipment employed for the manufacturing of C–C composites is considered. The safety constraints present in the system are assessed for adequacy through a hazard analysis by STPA/STAMP. The analysis through STPA/STAMP demonstrated the capability to create proactive strategies for the design and realization of process equipment that can be employed to manufacture C–C composite products through the FB-CVI process.     

Modeling of a sequencing batch reactor treating municipal wastewater using multi-layer perceptron and radial basis function artificial neural networks

A sequencing batch reactor was modeled using multi-layer perceptron and radial basis function artificial neural networks (MLPANN and RBFANN). Then, the effects of influent concentration (IC), filling time (FT), reaction time (RT), aeration intensity (AI), SRT and MLVSS concentration were examined on the effluent concentrations of TSS, TP, COD and NH₄⁺-N. The results showed that the optimal removal efficiencies would be obtained at FT of 1 h, RT of 6 h, aeration intensity of 0.88 m³/min and SRT of 30 days. In addition, COD and TSS removal efficiencies decreased and TP and NH₄⁺-N removal efficiencies did not change significantly with increases of influent concentration. The TSS, TP, COD and NH₄⁺-N removal efficiencies were 86%, 79%, 94% and 93%, respectively. The training procedures of all contaminants were highly collaborated for both RBFANN and MLPANN models. The results of training and testing data sets showed an almost perfect match between the experimental and the simulated effluent of TSS, TP, COD and NH₄⁺-N. The results indicated that with low experimental values of input data to train ANNs the MLPANN models compared to RBFANN models are more precise due to their higher coefficient of determination (R²) and lower root mean squared errors (RMSE) values.     

Study on Assessing Economic Vulnerability of Small Island Regions

The main purpose of this study is to assess economic vulnerability of small island development regions as part of their sustainability constraints. By combining economic and environmental time series data, we assessed a composite index of economic vulnerability which is constructed from three exogenous variables, namely economic exposure, economic remoteness, and economic impact of environmental and natural disasters. We used the Amami Islands, Kagoshima Prefecture, Japan as the case studies for this paper.The results indicated that using a gross island products based valuation index, Kikaijima is the most vulnerable island in the Amami Islands with a composite economic vulnerability index (CEVI) value of 0.678, while by using a per capita based index, Okinoerabujima is considered the most vulnerable island with a CEVI value of 0.680. From the results we also revealed that smaller islands have relative higher vulnerability than the bigger one, which also confirms some previous country-level vulnerability studies.However, it is matter of fact that some islands that have relatively high vulnerability also have good economic performance as shown by their per capita income. In this regard, it can be argued that the success of these small islands could have been achieved in spite of and not because of their inherent vulnerability conditions as an indicator of sustainability constraint. Regarding these findings, we also examined a comparison between vulnerability results and the preliminary concept of an island's resilience in order to capture another perspective on sustainability assessment in a small island region.     

全程自养颗粒污泥快速启动及混合营养型脱氮性能分析

在连续流条件下,基于颗粒污泥全程自养脱氮（CANON）工艺的快速启动和混合营养条件下高效脱氮,是CANON工程应用的重要环节.本研究在气提内循环反应器（AIR）中,以老化的CANON颗粒污泥经机械破碎至0.3 mm作为种泥,实现混合营养型单级颗粒污泥同步脱氮除碳.启动26 d,通过控制DO,系统出现稳定的部分硝化,再缩短HRT提升氨氮负荷至5.65 kg ·（m³ ·d）^-1,促进颗粒化和厌氧氨氧化;第68 d,总氮去除率达到58%之后,进水加入有机物,C/N从0提升到0.25和0.5,促进AOB、AMX和异养微生物的协同,氨氮去除率达95%,总氮去除率达85%,COD去除率达80%左右.COD浓度增加,能较好地抑制Nitrospira菌属等NOB的活性,q（NH₄⁺-N）和q（TN）稳定在0.4 g ·（g ·h）^-1和0.34 g ·（g ·h）^-1,q（NO₃^--N）约为0.02 g ·（g ·h）^-1.采用MiSeq高通量测序对微生物多样性分析,表明有机物对污泥中Nitrosomomas和Candidutus_Kuenenia丰度未产生显著影响,增加了Candidutus_Brocadia菌属以及具有反硝化功能Denitratisoma等菌属的丰度.这对于快速启动连续流CANON颗粒污泥工艺处理低C/N比废水提供思路.     

过硫酸钠缓释材料的释放性能及其对2, 4-二硝基甲苯的降解效果

针对原位化学氧化技术修复土壤和地下水时氧化剂因释放过快而导致的利用率低等问题,通过熔化成型法制备过硫酸钠缓释材料,分析石蜡、硅砂和过硫酸钠不同配比对材料成型度和释放性能的影响,研究缓释过程中溶液pH的变化,探讨其在水溶液中的缓释行为及其对2,4-二硝基甲苯（2,4-DNT）的降解效果.结果表明:当固定过硫酸钠质量为6 g、硅砂质量为18 g、蜡砂比（石蜡、硅砂质量之比）为1:4~1:8时,过硫酸钠缓释材料成型度适中,且过硫酸钠的累积缓释量随着时间的延长而逐渐增大,第31天时过硫酸钠累积释放百分比为74.67%~88.40%,可实现过硫酸钠的持续可控释放.当硅砂质量为18 g、蜡砂比为1:1~1:6时,过硫酸钠累积释放百分比随着过硫酸钠质量的增加而增大,且溶液中的pH呈先降低后上升的变化规律.缓释材料缓释前后实物图和显微镜分析结果显示,过硫酸钠缓释材料的释放是一个由外到内、速率由快变慢最终趋于平稳的过程.过硫酸钠质量为12 g、硅砂质量为18 g、蜡砂比为1:4的缓释材料对2,4-DNT具有较好的降解效果,第16次置换浓度为0.2 mg/L的2,4-DNT水溶液时,2,4-DNT的降解率为56.38%.研究显示,改变制备材料的配比可有效实现缓释材料中过硫酸钠的缓慢释放及对污染物的有效降解,可为原位化学氧化修复土壤和地下水提供理论支撑.      

新型防腐涂层对直升机典型结构材料防护性能研究

目的研究新型防腐涂层对直升机典型结构用铝合金及复合材料在热带海洋性气候环境下的防护性能,并与原防护涂层进行对比。方法通过测试涂层腐蚀后的形貌、光泽度、色差、电化学阻抗等,对比新/原涂层对直升机典型结构用铝合金和复合材料的防护性能。结果经过2年腐蚀后,新涂层表面无明显变化,而原涂层表面有轻微腐蚀,光泽度和色差下降较大。电化学阻抗测试表明,暴露前后涂层结构无明显变化,涂层阻抗值呈现持续下降的趋势,但是原涂层阻抗下降更快。结论新涂层对直升机典型铝合金和复合材料有更好的防护性,更加适于海洋性环境的使用。     

包装箱用碳纤维增强复合材料贮存寿命研究

目的研究碳纤维增强复合材料贮存条件下的性能变化趋势和寿命评估。方法对碳纤维增强复合材料开展四个不同温度条件下的热氧老化试验,按试验周期定期取样开展冲击性能测试,对试验数据采用寿命预估方法进行处理,对材料性能进行预估。结果通过数据计算分别得到我国热带海洋、干热沙漠等典型气候条件下的碳纤维增强复合材料贮存寿命分别为17.21~35.89年。结论碳纤维增强复合材料具有较好的贮存性能,在较为严酷的热带海洋气候和给定的失效判据条件下,寿命预计为17.21年。试验和数据处理方法可以较好地预计材料的性能变化趋势和开展寿命评估。     

介质粒径对复三维电极-生物膜脱硝反应器的影响

研究了无烟煤作填充介质时其粒径对复三维电极 生物膜反应器脱硝效果的影响 .选择了两种具有代表性的无烟煤粒径 :平均粒径D分别为 1 9mm和 4 0mm .研究了两种粒径介质的反应器出水中的NO-3 N、NO-2 N、pH变化 ,并对电流效率及处理负荷进行了对比 .结果表明在一定电流下 ,两反应器的NO-3 N去除率均能达到 98%;在同样操作条件下 ,D为 1 9mm反应器的脱硝能力优于D为 4 0mm反应器 ,前者比后者对水中NO-3 N的去除率高 10 %左右 .D为 1 9mm反应器的NO-3 N最高容积负荷、NO-3 N最高电极负荷、电流效率分别为 0 0 15kg (m3 ·h)、0 0 37mg (cm2 ·h)、36 0 %,均高于D为 4 0mm反应器约 10 %.以小粒径无烟煤为介质的反应器的生物量明显高于大粒径介质反应器 .     

MBBR处理低浓度污水的工程应用

用 2座体积 12 0m3的移动床生物膜反应器处理抚顺乙烯有限公司厂区的低浓度 (CODCr6 0～ 80mg L)生活污水 ,停留时间 2 4h ,出水通过高效纤维球过滤罐 ,CODCr降至 2 0mg L ,BOD5降至 5mg L ,SS降至 5mg L ,氨氮降至 1mg L ,达到了循环冷却水的回用标准。进水浓度过低 ,对MBBR挂膜不利 ,工程中采用外加营养物质的措施后 ,3d内反应器成功挂膜启动。     

乙酸型顶极群落的内平衡与反馈调节机制研究

通过产酸脱硫反应器处理高浓度硫酸盐有机废水的连续流试验，从“动态”角度考察COD／SO4^2-比改变引起的pH值、氧化还原电位（ORP）、碱度（ALK）和末端产物（VFAs）等的变动及生态因子的叠加效应引发的优势种群变迁，分析了乙酸型顶极群落的稳定性及其发生定向性生态演替的规律，进而阐明了乙酸型顶极群落抵抗环境压力的内平衡与反馈调节机制，并指出乙酸型代谢和乙酸型顶极群落是产酸脱硫生态系统的典型特征。