两点校正法的正确选择

在应用两点校正中，计算相对偏差在选择浓度点上有不同选法：相对偏差计算公式也有不同选法，导致计算结果没有可比性。本文用校准曲线及相对偏差概念，论述了应用两点校正法校正校准曲线如何正确选择浓度点及计算公式。     

TOPHAZOP: a knowledge-based software tool for conducting HAZOP in a rapid, efficient yet inexpensive manner

Hazard and operability (HAZOP) studies constitute an essential step in the risk analysis of any chemical process industry and involve systematic identification of every conceivable abnormal process deviation, its causes and abnormal consequences. These authors have recently proposed optHAZOP as an alternative procedure for conducting HAZOP studies in a shorter span of time than taken by conventional HAZOP procedure, with greater accuracy and effectiveness [Khan, F. I. and Abassi, S. A., optHAZOP. An effective and efficient technique for hazard identification and assessment Journal of Loss Prevention in the Process Industries, 1997, 10, 191–204]. optHAZOP consists of several steps, the most crucial one requires use of a knowledge-based software tool which would significantly reduce the requirement of expert man-hours and speed up the work of the study team. TOPHAZOP (Tool for OPTmizing HAZOP) has been developed to fulfil this need.

The TOPHAZOP knowledge-base consists of two main branches: process-specific and general. The TOPHAZOP framework allows these two branches to interact during the analysis to address the process-specific aspects of HAZOP analysis while maintaining the generality of the system. The system is open-ended and modular in structure to make easy implementation and/or expansion of knowledge. The important features of TOPHAZOP and its performance on an industrial case study are described.     

基于速度的交通事故分析

速度对交通事故的发生以及严重程度有着直接影响,是道路交通事故的重要诱因之一。为了准确地反映速度与事故之间的关系,减轻由于速度因素所造成的交通事故的损失,笔者对国内外速度与交通安全的情况进行分析;研究了平均速度与事故危险性、速度离散度与事故率以及速度与事故严重性的关系;提出了加强速度管理,控制交通流平均速度和减小相邻路段的速度差值的对策。基于速度的交通事故分析,建议采用85%位车速作为控制速度的上限值;提出限速措施,以达到减少交通事故及其损失的目的。     

CEMS比对监测数据偏差研究

简述CEMS比对监测技术背景,总结实际监测工作中导致数据偏差的各方面因素,分析问题产生原因并提出解决措施和建议。     

山区和平原连接处SF6试验及扩散规律研究

为更好了解污染物在复杂地形条件下的湍流扩散规律,2010年9月开展了一系列SF6示踪扩散试验,获取了SF6浓度数据,以此实验数据为基础,计算出SF6浓度分布在水平和垂直方向的扩散标准差、地面峰值浓度等参数,并与P-T-C扩散参数进行对比,总结得出了污染物在山区和平原连接处中性、稳定、强稳定等气象条件下湍流扩散规律。     

Experiment and simulation research of evolution process for LNG leakage and diffusion

The frequent occurrence of LNG leakage accidents has caused serious economic loss and environmental damage. Experiments and simulations can be combined to obtain the transient process of LNG leakage and diffusion. This paper analyzed LNG leakage diffusion rules with experiment results obtained by depleting 1.4t LNG. The vapor clouds and LNG concentration are measured, which can be a comparison with the simulation results. Computational fluid dynamics and gas diffusion theory were chosen as the theoretical basis, simulating the transient process of LNG gasification to obtain the diffusion concentration rules. The simulation of LNG diffusion is divided into two parts: LNG leakage at the source and atmospheric diffusion. The maximum concentration of methane in the experiment was 4.1%, and the maximum concentration in the simulation was 4.6%. The results show good agreement of the deviation statistics, which fall in the standard recommendation value range. Then we make a prediction of the dangerous concentration area and the flammability hazard zone of LNG leakage accident. The simulation results show that the range of the lower wind direction danger area firstly increases and then decreases, and the maximum distance of IDLH increases firstly and arrived at the peak of 52  m at 300s.     

Using multivariate regression modeling for sampling and predicting chemical characteristics of mixed waste in old landfills

Municipal solid waste landfills pose a threat on environment and human health, especially old landfills which lack facilities for collection and treatment of landfill gas and leachate. Consequently, missing information about emission flows prevent site-specific environmental risk assessments. To overcome this gap, the combination of waste sampling and analysis with statistical modeling is one option for estimating present and future emission potentials. Optimizing the tradeoff between investigation costs and reliable results requires knowledge about both: the number of samples to be taken and variables to be analyzed.This article aims to identify the optimized number of waste samples and variables in order to predict a larger set of variables. Therefore, we introduce a multivariate linear regression model and tested the applicability by usage of two case studies. Landfill A was used to set up and calibrate the model based on 50 waste samples and twelve variables. The calibrated model was applied to Landfill B including 36 waste samples and twelve variables with four predictor variables.The case study results are twofold: first, the reliable and accurate prediction of the twelve variables can be achieved with the knowledge of four predictor variables (Loi, EC, pH and Cl). For the second Landfill B, only ten full measurements would be needed for a reliable prediction of most response variables. The four predictor variables would exhibit comparably low analytical costs in comparison to the full set of measurements. This cost reduction could be used to increase the number of samples yielding an improved understanding of the spatial waste heterogeneity in landfills.Concluding, the future application of the developed model potentially improves the reliability of predicted emission potentials. The model could become a standard screening tool for old landfills if its applicability and reliability would be tested in additional case studies.     

高加速应力试验装置技术参数的测量

气锤驱动的高加速应力试验装置,能产生温度和非高斯随机振动应力,其中振动应力是由多个气锤作六自由度运动产生的。一般用来进行高温步进、低温步进、快速温度变化、振动、快速温变和振动复合试验。目前国家标准和校准规程中均无关于该试验装置的技术参数的校准方法。本文结合试验装置的技术特点,提出了几个关于温度和振动技术参数的测量方法,如:温度偏差、温度波动度、温度均匀度、温度过冲量、温度变化速率、均方根加速度、横向振动比、功率谱密度等。     

Development and application of LC–APCI–MS method for biomonitoring of animal and human exposure to imidacloprid

Imidacloprid (IMI) is a relatively new neuro-active neonicotinoid insecticide and nowadays one of the largest selling insecticides worldwide. In the present study a LC–APCI–MS based method was developed and validated for the quantification of imidacloprid and its main metabolite 6-chloronicotinic acid (6-CINA) in urine and hair specimens. The method was tested in biomonitoring of intentionally exposed animals and subsequently applied for biomonitoring of Cretan urban and rural population.     

有害物质环境测试组合舱的研制及性能评价

研制了一种新型有害物质环境测试组合舱,该测试舱由舱体系（内舱和外舱）、恒温恒湿空气处理系统、空气循环装置和信号控制与处理软件组成。该测试舱具有可分别使用内舱和外舱对样品进行测试的特点,并采用美国FLUNT公司开发的air pack软件包对内舱和外舱的气流进行模拟与计算,并划分出内舱的层流区域,同时也对舱体系的性能进行了测试与评价。结果表明,有害物质环境测试组合舱的温湿度的相对标准偏差分别为0.04℃和0.7%,混合性达到90.7%。因此,该有害物质环境测试组合舱对温湿度控制精准,气流稳定,混合性能良好,能为室内空气污染研究提供条件稳定的室内仿真环境。