Climate readiness of recovery plans for threatened Australian species

The rapidly changing climate is posing growing threats for all species, but particularly for those already considered threatened. We reviewed 100 recovery plans for Australian terrestrial threatened species (50 fauna and 50 flora plans) written from 1997 to 2017. We recorded the number of plans that acknowledged climate change as a threat and of these how many proposed specific actions to ameliorate the threat. We classified these actions along a continuum from passive or incremental to active or interventionist. Overall, just under 60% of the sampled recovery plans listed climate change as a current or potential threat to the threatened taxa, and the likelihood of this acknowledgment increased over time. A far smaller proportion of the plans, however, identified specific actions associated with ameliorating climate risk (22%) and even fewer (9%) recommended any interventionist action in response to a climate-change-associated threat. Our results point to a disconnect between the knowledge generated on climate-change-related risk and potential adaptation strategies and the extent to which this knowledge has been incorporated into an important instrument of conservation action.     

Safety assessment of the film boiling chemical vapor infiltration (FB-CVI) process through a system-theoretic accident model and process (STAMP)

Film boiling chemical vapor infiltration (FB-CVI) is considered as one of the fastest process methodologies for manufacturing carbon-carbon (C–C) composite products and possesses various advantages compared to conventional methodologies. However, there are safety concerns associated with this process for large-scale manufacturing, mainly owing to the intrinsic nature of the precursor and the process conditions. Considering the multifunctional interactions of the various systems during the process, a system-theoretic process analysis (STPA)/system theoretic accident model and process (STAMP) model is used to perform a safety analysis of the hazardous states of the FB-CVI process at the system level. As a case study, the FB-CVI process equipment employed for the manufacturing of C–C composites is considered. The safety constraints present in the system are assessed for adequacy through a hazard analysis by STPA/STAMP. The analysis through STPA/STAMP demonstrated the capability to create proactive strategies for the design and realization of process equipment that can be employed to manufacture C–C composite products through the FB-CVI process.     

乙醇汽油与普通汽油非常规污染物排放特性对比研究

在一台满足国Ⅴ排放标准的双喷射(气口喷射+缸内直喷)汽油机上开展了燃用E10乙醇汽油(乙醇体积比为10%)对发动机非常规排放特性影响的试验研究.使用傅里叶变换红外分析仪(FTIR)测量了饱和烃、不饱和烃、芳香烃及醇、醛等非常规污染物排放量,对比分析了双喷射模式时各工况下E0和E10两种燃料的非常规排放水平.结果表明,双喷射模式下,加入乙醇有效降低了乙烯、1,3-丁二烯、苯和甲苯的排放量,但会导致乙醛排放升高.双喷射模式下,随着负荷增加,两种燃料下的1,3-丁二烯和甲苯排放呈现先升高后降低的趋势,乙烯、甲醛和苯排放则先降低后升高.乙醇能抑制1,3-丁二烯、乙烯生成,抑制效果为PFI模式优于双喷射模式,GDI模式抑制量最低.PFI和GDI模式下E10的甲醛排放均显著升高,但双喷射模式有效抑制了甲醛排放的增加.     

废旧阴极-赤泥协同处理烧结熟料的溶出性能

采用XRF,ICP-MS,XRD及SEM-EDS检测手段,研究了废旧阴极-赤泥高温协同处理所得熟料的溶出性能.结果表明,Na₂CO₃浓度,温度,时间及液固比因素对Al₂O₃,Na₂O溶出率TFe₂O₃的富集效果的影响趋势一致.最适宜溶出条件为：Na₂CO₃ 30g/L,温度50℃,时间30min,液固比8.该条件下,熟料中Al₂O₃和Na₂O溶出率分别高达为87.41%和92.51%;相应的SiO₂和CaO溶出率仅为3.02%和0.36%,铁矿物几乎不溶.溶出渣中的TFe₂O₃含量从熟料中23.64%提高到39.89%,研究表明溶出工艺同步实现了熟料中铝、钠的回收和铁的富集.再者,处理后溶出渣较熟料减量近16%（以铝和钠溶出率测算）,且属于非危险性废物.     

北山地区大气降水中水化学及稳定同位素特征

为揭示甘肃北山地区大气降水的水化学及同位素特征,利用2012~2019年度采集的97件大气降水样品,采用相关性分析,富集因子,气团后向轨迹分析等多种方法对北山地区稳定同位素变化特征及其影响因素,降水中主要离子变化特征,不同离子来源及贡献,水汽来源进行了分析.结果表明,北山地区区域降水线的斜率与截距均高于张掖地区大气降水线;该区降水中稳定同位素比率明显受季节性,温度和高程效应的影响,在年尺度下,降雨量效应不明显;该区降水中氘盈余变化较大,雨季降水中氘盈余显著小于旱季降水中氘盈余值;北山地区大气降水的水化学型主要为HCO₃·SO₄-Ca和HCO₃-Ca型,降水中离子浓度具有明显的季节性变化,降雨量的增加对离子浓度具有一定的稀释作用;Na⁺受海源和陆源物质的双重影响;绝大部分的Ca²⁺,K⁺,HCO₃^-和部分Mg²⁺来源于陆源,SO₄^2-与NO₃^-的主要来自于人类活动输入;区内冬夏季水汽来源基本一致,来源于西北方向的季风源是北山地区最主要的水汽来源.研究成果可为我国高放废物地质处置库选址和性能评价以及未来地下处置库建设提供依据,也有助于丰富西北干旱区的水文循环过程研究.     

Exposure Assessment to Mercury Vapor in Chloralkali Industry

The aim of the study was to develop a sampling method aimed at individual sampling of mercury vapor and subsequent individualexposure assessment of the worker. Hopcalite available fromInowrocawskie Zakady Chemiczne (in Poland) was founduseful for mercury vapor sampling in active and passive individual samplers. However the sampling rate determined forpassive sampler in steady-state laboratory chamber cannot be usedunder fluctuating conditions of mercury vapor concentration andair movement typical for field measurement. In order to check comparativeness of passive and active sampling methods, sampleswere taken in the same time and individual samplers fixed toworker's clothes were used. Mercury vapor concentration wasmeasured at two chloralkali industries in Poland and the resultswere presented. Excessive exposure in both industries wasconfirmed by finding elevated mercury concentration in urinesamples from the workers.     

无机痕量分析中预富集技术的应用现状及前景

综述了预富集技术在无机痕量分析中的应用，概述了国内外最新进展，介绍了主要技术及方法的特点，大量文献表明预富集技术用于痕量分析取得满意的效果，降低了检测限，提高了灵敏度。     

西藏公路建设过程中的生态保护

针对西藏独特的高原生态环境特征，分析了公路建设的生态影响，提出了不同生态系统类型的生态恢复和保护措施。     

废旧塑料回收利用技术

从我国废塑料回收利用的现状出发 ,分析了今后我国废塑料回收利用技术的发展趋势和应采取的措施 ,指出了废塑料回收利用的重要性。     

唐钢2×150t转炉煤气回收系统设计及运行实践

在此较详细地介绍了唐钢一炼钢厂 2× 15 0t转炉煤气回收湿法除尘工艺和系统的技术特点。该系统设计吸收了国内外大型转炉煤气回收的经验。经近 18个月的生产实践 ;认为效果良好 ,煤气回收率近 80 % ,热值近 80 0 0kJ Nm3,放散排放浓度小于 80mg m