Stability of a Coal Waste Artificial Reef

The feasibility of using U.K. coal-fired power station waste materials for artificial reef production is being examined. in June, 1989, an experimental artificial reef was constructed in Poole Bay, off the central south coast of the U.K., using three different mixtures of pulverised fuel ash (PFA), flue gas desulphurisation (FGD) gypsum and slurry, stabilized with cement and formed into blocks. Fifty tonnes of 40 × 20 × 20 cm blocks were formed into eight conical reef units replicating three different PFA/gypsum mixtures and one concrete control. the reef structure is 10m below chart datum on a flat sandy sea-bed.

Combustion of coal concentrates the heavy metal content in the resultant ash. the purpose of stabilization of the ash as blocks is twofold: to immobilize heavy metals (or other components) and to provide hard substratum for the attachment of organisms. to examine the effectiveness of this stabilization and hence the environmental compatibility of the block materials, heavy metal (Cd, Cr, Cu, Pb, Mn, Ni, Zn) content of the blocks has been monitored routinely over two years, to determine leaching rates. Sectional profiles indicate partial replacement of calcium content by magnesium. Associated with this there has also been some redistribution of heavy metals. Only in the case of cadmium has there been a detectable loss from the surface of blocks. Chromium and manganese concentrations appear to have increased. the metal content of the reef epibiota (including ascidians, Ascidia mentula; hydroids, Halecium spp.; bryozoans, Bugula spp. and red algae) growing on the ash blocks has been compared to that of epibiota attached to the concrete controls and surrounding sea-bed. to date no evidence of excess bioaccumulation of metals has been detected.

The physical integrity of the ash reef blocks has been maintained. There is evidence that the blocks are increasing in compressive strength.

An indication of the fishery enhancement potential of the experimental structure is given by the presence of eight commercially fished species (crustaceans and molluscs) including lobsters (Homarus gammarus).     

焚烧飞灰重金属含量及浸出长期变化规律研究

通过对24个飞灰样品的重金属全量消解和高精度X射线荧光光谱法（HDXRF）快速检测结果进行线性回归分析,发现HDXRF法可较准确测定飞灰中Cu、Pb、Zn、Ni和Cd含量（线性回归决定系数R²³0.90）.采用HDXRF法对某焚烧厂飞灰重金属含量6个月快速检测及浸出毒性测定数据统计分析发现：飞灰重金属月均含量较稳定（变异系数CV<0.14）但日均含量波动较大（CV>2.54）;飞灰中Pb、Cu和Zn含量呈正相关（相关系数r>0.78）;金属浸出浓度受浸出液终点pH值影响显著,超标频率依次为Pb（68.9%）、Cd（66.1%）、Ni（24.0%）、Cu（14.2%）和Zn（1.6%）.短期飞灰金属含量和浸出毒性数据受焚烧工况,烟气处理工况和垃圾组分等多种因素共同影响,不具有代表性.为评估垃圾分类源头削减重金属效果,建议采用快速检测方法对焚烧飞灰重金属含量进行长期监测.     

Coupling mechanism of activated carbon mixed with dust for flue gas desulfurization and denitrification

To clarify the effect of coking dust, sintering dust and fly ash on the activity of activated carbon for various industrial flue gas desulfurization and denitrification, the coupling mechanism of the mixed activated carbon and dust was investigated to provide theoretical reference for the stable operation. The results show that coking dust had 34% desulfurization efficiency and 10% denitrification efficiency; correspondingly, sintering dust and fly ash had no obvious desulfurization and denitrification activities. For the mixture of activated carbon and dust, the coking dust reduced the desulfurization and denitrification efficiencies by blocking the pores of activated carbon, and its inhibiting effect on activated carbon was larger than its own desulfurization and denitrification activity. The sintering dust also reduced the desulfurization efficiency on the activated carbon while enhancing the denitrification efficiency. Fly ash blocked the pores of activated carbon and reduced its reaction activity. The reaction activity of coking dust mainly came from the surface functional groups, similar to that of activated carbon. The reaction activity of sintering dust mainly came from the oxidative property of Fe₂O₃, which oxidized NO to NO₂ and promoted the fast selectively catalytic reduction (SCR) of NO to form N₂. Sintering dust was activated by the joint action of activated carbon, and both had a coupling function. Sintering dust enhanced the adsorption and oxidation of NO, and activated carbon further promoted the reduction of NO_x by NH₃; thus, the denitrification efficiency increased by 5%-7% on the activated carbon.     

温度和含水率对村镇垃圾焚烧烟气中有机物排放的影响

使用管式炉模拟村镇生活垃圾焚烧过程,研究不同焚烧温度和不同垃圾含水率条件下,村镇垃圾焚烧烟气中多环芳烃（PAHs）、氯苯及苯系物的生成和分布特性.结果表明,焚烧温度为550℃时,烟气中多环芳烃和氯苯的释放量最大,当温度小于550℃时,多环芳烃和氯苯的释放量随温度升高而增加,温度大于550℃时,多环芳烃和氯苯的释放量随温度升高而降低.高温焚烧不仅可以抑制烟气中多环芳烃的浓度及减少大分子量PAHs的排放,还能降低氯苯的释放量和氯代数,从而减小村镇垃圾焚烧烟气中的毒性;苯系物随着温度升高,由热解转变为高温合成,释放量也随着增加.水分对多环芳烃和氯苯有较大影响,对苯系物的影响较小.在400℃条件焚烧时,水分含量对多环芳烃总体上是促进的,而在850℃焚烧条件下则表现出抑制作用;而水分对氯苯则均表现出抑制作用,并且可以降低氯苯化合物的氯代数.     

Fly-ash-induced oxidative stress and tolerance in Prosopis juliflora L. grown on different amended substrates

Field experiments were conducted to study the impact of metal accumulation on malondialdehyde (MDA), cysteine and non-protein thiol (NPSH) contents in the plants of Prosopis juliflora grown on the fly ash (FA) amended with soil, blue green algae (BGA) biofertilizer, farm yard manure, press mud and Rhizobium inoculation. The analysis of data revealed that the level of MDA, cysteine and NPSH was higher in the roots of the plant than leaves, which was found positively correlated with metal accumulation. An increase of 361.14, 64.25 and 305.62% in MDA, cysteine and NPSH contents, respectively was observed after 45 days in the roots of the plants grown in 100% FA as compared to 100% garden soil (GS). The level of MDA, cysteine and NPSH was found less in the plants grown on various amendments of FA showing ameliorating effect on the toxicity induced due to the accumulation of metals. The decrease in MDA, cysteine and NPSH contents was higher in Rhizobium-inoculated plants as compared to uninoculated plants grown on 100% FA. The results showed a high tolerance potential of the plant, which is further increased by inoculating the plant with FA-tolerant Rhizobium showing feasibility of using P. juliflora in environmental monitoring of FA landfills.     

CFB锅炉燃烧高硫石油焦的灰渣综合利用研究

循环流化床锅炉在燃烧含硫石油焦时,通过加入石灰石在燃烧的过程中以固态的形式脱硫,燃烧后将产生大量的灰渣,过去处理灰渣最通常的方式是作土地填埋。从灰渣的化学、物理特性试验研究出发,寻找循环流化床灰渣在建筑材料、农业应用和水泥添加剂方面的利用途径,研究了更加经济有效的灰渣处理方法。     

己二胺有机废液在流化床中焚烧的实验研究

在实验室规模的热态流化床试验台上，进行了含5％己二胺有机废液的焚烧 实验研究，在700－900℃范围内，研究温度及空气过剩系数对NOx沿床高的变化规律，以及它们对NOx排放浓度的影响。实验结果表明，沿高度方向上NOx浓度 逐渐降低，并且存在NO2浓度大于NO浓度这一有趣现象，在900℃下氧量增加有利于密相区NO、NO2浓度的降低，说明在 有氧条件下NH2促进NOx的还原，在不同空气 过剩系数下和然相区出口NOx几乎为零 ，表明900℃是己二胺有机废液焚烧 的合适温度。     

粉煤灰预处理及其对染料单体脱色效果的研究

介绍了一种粉煤灰预处理的方法-用8mol/L的H2SO4处理，可较好地改善其表面状况，并用预处理后的粉煤灰对染料单体进行脱色试验，寻找了最佳的处理方案，脱色效果较好，建立了Langmuir吸附等温模型。探讨了其脱色机理，为实际开发利用粉煤灰处理印染废水提供基础研究。     

全封闭垃圾焚烧空气污染影响与控制措施

以大坦沙资源电厂为研究对象 ,通过对全封闭垃圾燃烧、污染物去除、废气高空排放工艺流程分析以及运用列举法和大气扩散数学模式对全封闭垃圾焚烧厂的污染影响与控制进行了探究 ,提出了有关垃圾焚烧空气污染防治对策和建议 ,为垃圾焚烧处理提供参考     

粉煤灰/工业污泥烧结陶粒的制备与应用

以粉煤灰和工业污水处理站的剩余污泥为主要原材料，采用烧结法研制复合陶粒。分析了不同配方和不同烧结温度对陶粒性能的影响，以陶粒吸水率．容重为评价指标确定最佳配比和最佳烧结温度。提出用陶粒铺设景观水底，治理城市水体．并对其进行了可行性分析。粉煤灰／污泥陶粒的容重为0．79～0．9g／cm^3，吸水率为68．95％-80．01％。陶粒对水中氨氮和总磷吸附容量分别为0．03～0．05mg／g和0．01-0.02mg／g。