三峡库区水土流失特点及其环境危害防治措施探讨

水土流失是三峡库区主要环境问题之一,也是库区产生大量泥沙的根本因素,更是造成库区人民生活贫困的根源。本文就三峡库区水土流失的特点及其环境危害作了分析,提出了相应的防治措施,为水土流失防治工程提供科学依据。     

可张孔曝气器曝气能耗试验研究

通过试验研究，总结出可张孔曝气阻力损失的影响因素，以优化产品的结构设计参数，降低产品在工程应用中的能耗，获取更好的经济效益。     

Acid Deposition in the Tuscan Appennines During the Dry Period 1988-89

The typical parameters of acid precipitation are evaluated in the forest of Vallombrosa (Tuscan Appennines) during the dry period 1988-89. Individual rain events (dry and wet deposition) were sampled in a clearing of the forest and below the canopy of an evergreen tree as well as a deciduous broadleaf tree.

In atmospheric precipitation the pH values usually vary around 4.4, with neutralization in the hot season due to calcareous material from distant sources. Relatively large concentrations of Pb and Cd are found in rain, but only in a small amount in canopy leachate. Aluminium, manganese and iron are more significantly washed off than Pb and Cd.     

母岩的风化剥蚀速率与土壤允许流失量的关系 --以长江三峡坝区风化花岗岩土壤为例

土壤允许流失量的确定是一个非常复杂而又必须解决的问题，它关系到水土保持措施的布设和土壤的可持续利用。然而，发育在不同母质上的土壤，其土壤的最大允许流失量差异很大，确定这一值的依据也各不相同。在岩成土壤地区，母岩风化剥蚀速率的大小直接影响土壤的发育。是确定土壤允许流失量、分析人类加速水土流失的重要依据之一。选长江三峡黄陵背斜段风化花岗岩土壤为研究对象，根据剥蚀沉积相关原理，通过恢复古地理环境及时代，计算出新生代以来本区花岗岩的平均风化剥蚀速率为16．97mm／ka．最大剥蚀速率为49．56。又根据区内太平溪流域的泥沙资料，算出了当地现代的剥蚀速率，多年平均为297．7mm／ka，最小值为31．5mm／ka，而水利部颁布的当地土壤允许流失量为200t／km^2,a，折合为76．9mm／ka，二者相差近1．5—4．5倍。基于此。提出了确定土壤允许流失量必须参考母岩风化剥蚀速率的新观点。     

焚烧飞灰重金属含量及浸出长期变化规律研究

通过对24个飞灰样品的重金属全量消解和高精度X射线荧光光谱法（HDXRF）快速检测结果进行线性回归分析,发现HDXRF法可较准确测定飞灰中Cu、Pb、Zn、Ni和Cd含量（线性回归决定系数R²³0.90）.采用HDXRF法对某焚烧厂飞灰重金属含量6个月快速检测及浸出毒性测定数据统计分析发现：飞灰重金属月均含量较稳定（变异系数CV<0.14）但日均含量波动较大（CV>2.54）;飞灰中Pb、Cu和Zn含量呈正相关（相关系数r>0.78）;金属浸出浓度受浸出液终点pH值影响显著,超标频率依次为Pb（68.9%）、Cd（66.1%）、Ni（24.0%）、Cu（14.2%）和Zn（1.6%）.短期飞灰金属含量和浸出毒性数据受焚烧工况,烟气处理工况和垃圾组分等多种因素共同影响,不具有代表性.为评估垃圾分类源头削减重金属效果,建议采用快速检测方法对焚烧飞灰重金属含量进行长期监测.     

利用HYSPLIT模型研究珠三角地区VOCs时空分布特征

于2016年在中国广东大气超级监测站,开展4个季节的VOCs长时间观测,共获得2142组有效数据,并利用HYSPLIT模型分析珠三角地区VOCs时空分布特征.结果表明,各类VOCs混合比和化学反应活性具有明显的季节变化特点.观测期间,VOCs平均浓度为（18.523±20.978）×10^-9,其中,低碳烯烃和苯系物二者混合比之和仅占46%,但贡献了85%的·OH消耗速率（L_OH）、82%的臭氧生成潜势（OFP）和97%的二次气溶胶生成潜势（SOAFP）.观测站点主要受来自北部内陆地区气团（1#）、西部内陆地区气团（2#）、台湾海峡南端气团（3#）以及南部海洋地区气团（4#）的影响.1#气团中炔烃和苯系物的混合比占比最高,分别达到10%、37%,而3#气团中低碳烷烃的浓度水平最高,达到（8.437±5.561）×10^-9.通过估算气团中VOCs的化学反应活性,可以发现,1#气团的VOCs化学反应活性最强,其对O₃和SOA的生成贡献最高.1#、2#、3#和4#气团中VOCs的化学反应活性主要由苯系物和低碳烯烃贡献.     

Assessment of China's economic loss resulting from the degradation of agricultural land in the end of 20th century

Land degradation is a consequence stemming from both natural processes and social economic activities. On the bases of analyzing general situation of agricultural land degradation in China, the monetary estimating methods such as market value method and shadow engineering method were used to quantitatively assess the economic loss resulting from land deterioration. Results showed that the economic loss in 1999 was 326.8l billion RMB Yuan, which accounted for 4.1% of GDP in the same year of China. If taking five items namely farmland conversion, soil erosion, salinization, decline in reservoir functions, and siltation in waterways and, comparing with that in 1992, the percentage of economic loss to GDP has increased by 1.5 in the only 7 years.     

Effects of simulated acid rain on cation release in soils of South China

This paper deals with the release of base cations and Al3+ at the treatment with simulated acid rain (SAR) in main soil types collected from South China. Results showed that the amounts of base cations increased obviously when the pH value of simulated acid rain was lower than 3.0 or 3.5. Compared with the leaching of K+ and Na+, the leaching of Ca2+ and Mg2+ was affected by the pH value of SAR. Only when the amounts of base cations leached from soils exceeded the cation exchange capacity, the pH value of leaching solutions decreased sharply and the amounts of released Al3+ increased. The H+ buffering mechanisms, which were affected notonly by the pH values of SAR, but also by the types and solid components of soils, were proposed for the main soils studied.     

炭素行业推行清洁生产的污染物排放系数研究

推行清洁生产、减少污染物排放量，根本的方法是控制物料流失。本研究对炭素制品生产过程中的投入产出进行物料平衡测算，确定各工序物料流失总量及污染物排放系数，提出减少流失、降低排污系数的措施。