电感耦合等离子体质谱法在环境监测中的应用

针对ICP-MS技术的使用特点及其近年来在环境监测领域的应用进行综合阐述，并对ICP-MS技术的发展前景作出简单的评述。     

左炔诺孕酮对稀有鮈鲫脂质代谢的干扰效应

为探究孕激素左炔诺孕酮（LNG）对鱼类脂质代谢的影响,将刚孵化的稀有鮈鲫仔鱼置于0.8和6.5ng/L LNG暴露6个月至性成熟,考察其生长指标、肝脏组织病理学变化、脂质和脂蛋白含量及脂质代谢相关基因的表达情况.结果显示：（1）0.8,6.5ng/L LNG暴露显著降低70dph稀有鮈鲫的体重和肥满度,且6.5ng/L LNG暴露显著降低180dph雌、雄鱼的体长或体重;（2）0.8,6.5ng/L LNG暴露导致180dph成鱼肝脏出现细胞空泡、肝细胞肿胀等损伤;（3）0.8,6.5ng/L LNG暴露显著降低180dph雌鱼肝脏中甘油三酯、胆固醇的含量,且6.5ng/L LNG暴露显著降低雌鱼血浆中甘油三酯的含量,但对雄鱼肝脏及血浆的脂质含量无显著影响;（4）0.8,6.5ng/L LNG暴露显著降低180dph雌鱼肝脏中脂肪酸合成酶基因（fasn） mRNA的表达水平,且6.5ng/L LNG暴露显著降低180dph雄鱼肝脏中fasn及乙酰辅酶A羧化酶基因（acaca） mRNA的表达水平.由此可见,LNG长期低剂量暴露可抑制稀有鮈鲫的生长、诱导肝细胞损伤、引起肝脏和血浆脂质含量发生性别差异性变化,并影响肝脏中脂质代谢相关基因的表达,表明LNG在低浓度下可干扰稀有鮈鲫的脂质代谢,提示LNG对鱼类种群具有较高的潜在生态风险.     

Status and Trends of Dissolved Oxygen in Corpus Christi Bay, Texas, U.S.A.

The purpose of this studywas to determine status and long-term trends of dissolved oxygen concentrations (DO) in Corpus Christi Bay, Texas, U.S.A. A 20-year record of randomized stations was used to determine the trend of surface water DO, salinity, and temperature over space and time. A 13-year record of two fixed stations was used to determine the temporal nutrient trends. A 10-year record of fixed stations in the southeastern region of Corpus Christi Bay was used to determine the status of disturbance caused by low DO in bottom waters. From 1982 to 2002, there was a significant decrease in surface water DO at a rate of 0.06 mg L⁻¹ yr⁻¹ and a significant increase in surface water temperature at a rate of 0.07°C yr⁻¹. The southeastern region of Corpus Christi Bay had the lowest average DO, and during July and August, DO are steadily declining at a rate of 0.09 mg L⁻¹ yr⁻¹. It is not likely that eutrophication is causing hypoxia, because freshwater inflow rates have significantly decreased since 1941 and nutrient levels have not changed from 1987 to 2000. Even though long-term trends indicate that average surface DO is decreasing, disturbance by hypoxia appears to be stable, but this may be due to just eight years of data. In fact, if the current trend continues, surface water DO will not meet exceptional aquatic life standards (≤5 mgL⁻¹) in 2032.     

Aerosol Scavenging: Model Application and Sensitivity Analysis in the Indian Context

Sulfate aerosols have been found to bethe major contributors to precipitation acidity. Thus,in view of the long-term ecological repercussions theyhave on aquatic ecosystems and their acidity-potential,the present analysis focuses on a case study applicationof the layer-averaged aerosol-scavenging model (Okita et al., 1996) for predicting values of the wet scavengingcoefficient and sulfate concentrations in precipitationsamples on the basis of the information available forsome selected Indian cities. Through sensitivityanalysis (Pandey et al., 1997) the scavengingcoefficient has been found to be very strongly dependenton precipitation intensity. Comparison of modelpredictions has been done with the measured values forDelhi, Mumbai, Calcutta and Chennai in India.     

高温嗜粪菌的选育和猪粪发酵研究

筛选得到了８株嗜高温（５５℃）嗜粪细菌，均具有较强的发酵猪粪能力。加入所选育菌株进行的猪粪高温（５５℃）固体好氧发酵实验发明，２４ｈ内可将猪粪发酵成无臭味、深褐色的稳定和无害化产物，常温下长时间放置也不会产生腐败和臭味。此发酵产物的氮试验法结果显示，猪粪已发酵至表观成熟和稳定化，可作为进一步制取优质有机复合肥料的良好前体物。     

中水回用工程投建与运行实践

沈阳理工大学学生城中水设施的建设，不仅提高了水资源的重复利用率，创造良好的环境效益和经济效益，同时也为中水回用工作的推广实施积累了经验。尤其是采用比较简单的污水处理工艺达到中水回用的标准，其中最主要的部分是沉淀和生物接触氧化以及最后的过滤和消毒，这样的工艺比较适合中等规模的投资，从回用水的经济效益上看这样的中水回用系统还是比较适合推广。     

幼教活动过程中实践环保教育

在幼教活动中实施环保教育具有重要的意义,须从引导幼儿关注环境入手,通过教学计划和活动、幼儿园环境创设和一日生活的引导培养幼儿初步的环保意识。     

The Dynamic Safety Evaluation ModelOf the Safety Control Theory and Its Application

The Safety Sate Equation of theSafety System　　 Any system is moving,and the system mo-tion is the results of contradiction existing in thesystem.So is the safety system.In the safetysystem,the contradiction is the affection of thetwo concentrated variables,the hazard(H) andthe hazard control(C) .The ratio of injury anddeath of the system (Y) is one of the indexes de-scribing the safety state of system.Therefore,Yis the reflection of the result between hazard Hand hazard control C.Ac…     

聚合物材料在快速原型制造技术中的应用

介绍聚合物材料作为成形原料在主要的快速原型制造(RPM)工艺中的应用情况。具体按照立体印刷成形(SLA)、层合实体制造(LOM)、选域激光烧结(SLS)及熔融沉积造型(FDM)这4种工艺的不同,阐述与各工艺对应的聚合物材料的种类、聚合物材料成形过程中可能出现的问题及解决方案。总结了聚合物材料原型的应用情况和聚合物材料在RPM技术应用中存在的问题。