Novel synthesis blends between bacterial polyesters and acrylic rubber: A study on enzymatic biodegradation

The biodegradability of a multicomponent system based on biotechnological occurring polyester (poly(-hydroxybutyrate-co--hydroxyvalerate) (PHBV)) with inclusion of acrylate elastomer (polybutylacrylate) (PBA) was investigated. A bacterium which produced extracellular enzymes that degrades PHBV even when blended with PBA was isolated and tentatively designated asAureobacterium saperdae. It was observed, by morphological investigation, that, while the bacterial degradation was permitted for PBA content of 20% by weight, it was inhibited for PBA content of 30%, owing to the occurrence of a rubbery layer that prevents to the bacteria an easy accessibility in the PHBV-rich regions. In fact, owing the bacterial growth, only PHBV was metabolized, whereas no degradation of PBA was detected for blend samples. It was confirmed that the degradation proceeded via surface erosion of PHBV also in the blends. Finally, mechanical tests on PHBV/PBA specimens as a function of degradation extent have shown different behavior of the blends at different the PBA content. Thermal analysis of blends and PHBV has been reported, too     

Mechanical and Barrier Properties of Biodegradable Films Made from Chitosan and Poly (Lactic Acid) Blends

Biodegradable film blends of chitosan with poly(lactic acid) (PLA) were prepared by solution mixing and film casting. The main goal of these blends is to improve the water vapor barrier of chitosan by blending it with a hydrophobic biodegradable polymer from renewable resources. Mechanical properties of obtained films were assessed by tensile test. Thermal properties, water barrier properties, and water sensitivity were studied by differential scanning calorimeter analysis, water vapor permeability measurements, and surface-angle contact tests, respectively. The incorporation of PLA to chitosan improved the water barrier properties and decreased the water sensitivity of chitosan film. However, the tensile strength and elastic modulus of chitosan decreased with the addition of PLA. Mechanical and thermal properties revealed that chitosan and PLA blends are incompatible, consistent with the results of Fourier transform infrared (FTIR) analysis that showed the absence of specific interaction between chitosan and PLA.     

新型介质阻挡放电反应器同时处理废气和废液研究

为了充分发挥介质阻挡放电处理污染物的能力.本研究依据介质阻挡放电降解废气和废液的原理,设计了一种介质阻挡放电同时处理废液和废气的反应器,并对模拟废气甲苯和染料废水进行处理.实验过程中对甲苯和染料废水分别单独处理和两者同时处理的效果进行了比较.结果表明,甲苯在单独处理和同染料废水同时处理时都可达到较高的降解效果,两者同时处理时甲苯的降解效率可达88.6%.并且在甲苯降解效率基本保持不变的情况下,本反应器可以实现对染料废水的同步降解,其中处理50 mg·L-1活性艳蓝60min时,降解率可达95.4%,每小时处理量为35.8 mg.通过同时处理甲苯和染料废水提高了反应器的能量利用效率.     

典型高山堰塞湖湖滨带和缓冲带的划定及生态修复思路——以镜泊湖为例

镜泊湖是中国最大、世界第二大高山堰塞湖,具有特殊的地形地貌,属于典型通江型深水湖泊。通过对镜泊湖及周边生态环境调查,划定了湖滨带和缓冲带的类型及宽度。基于镜泊湖岸带地形地貌特征及水文情况,将镜泊湖湖滨带划分为山体型、大堤型、道路型、河口型、村落型、农田型6种类型,将镜泊湖缓冲带划分为山体型、农田型、村落型3种类型。结合湖滨带和缓冲带的生境、土地利用方式、土壤侵蚀状况及植被分布现状等因素,阐述镜泊湖湖滨带和缓冲带生态环境面临的主要问题,提出镜泊湖湖滨缓冲带生态修复思路,以期为镜泊湖湖滨缓冲带的生态保护及修复提供参考。     

控制轨道交通噪声道间声屏障研究

应用环境噪声预测与分析软件SOUNDPLAN对将设置在上海轨道交通6#线上下行线之间的道间声屏障插入损失进行了模拟计算。计算结果表明,安装道间声屏障可使得距离线路20～30m远的较高层建筑获得2～4.7dB的降噪效果;随着两侧声屏障高度的增加,安装道间声屏障对待测表面的影响范围在缩小;离轨道线路越近,道间声屏障的插入损失越大。     

粗石英砂层厚度及倾角对核废物处置库顶盖毛细屏障效应的影响

毛细屏障作为核废物处置库顶盖的工程屏障之一,已经在国内外得到了广泛应用.采用箱体实验方法,研究了非饱和稳定流条件下粗石英砂层厚度和倾角对毛细屏障效应的影响.结果表明,随着粗石英砂层厚度的增大,水分的相对绕流量增大,毛细屏障效应增强;随着粗石英砂层倾角的增大,其表面积水减少,水的横向流动能力增强,毛细屏障效应增强.     

Ecogenetic features and functions of solods in transural forest-steppes (within Sverdlovsk Oblast)

Specific ecogenetic features of solods in the forest-steppe zone has been studied, and the role of biotic and abiotic factors of soil formation has been estimated. Differentiation of soil horizons with respect to the physical clay fraction accounts for specific features of their moistening, which is reflected in the ratio of strongly and weakly crystallized forms of iron. Periodic changes in redox conditions results in iron segregation, and a high content of fulvic acids accounts for its eluvial migration. These processes are controlled by soil geochemical barriers.     

生活垃圾加载介质层填埋法对初期渗滤液污染抑制效果研究

以传统卫生填埋柱R2为对照,通过往生物反应器填埋柱R1内加载可渗透反应介质层1和2进行模拟试验,主要探讨了填埋柱R1垃圾渗滤液COD、总氮、氨氮及总磷的变化趋势,探索一种新型的加载介质层垃圾填埋处理方法。试验结果表明,填埋20周后, R1柱COD浓度基本维持在40 000～45 000 mg/L间,约为R2柱的20%～30%;第24周,R1柱总氮和氨氮分别为206.5 mg/L和167.3 mg/L,在16～24周内,R1总氮和氨氮分别约为R2的14.5%～17.5%和36.2%～43.6%;18周时,R1柱总磷达最大值1.704 mg/L,至第24周降为0.673 mg/L, 整个实验过程R1柱总磷约为R2的0.15%～0.56%。     

HAN阻隔防爆模型研究

通过合理简化,利用多方气体状态方程,分别建立油品储运容器内可燃混合气体定容爆炸模型和装设阻隔防爆材料的油品储运容器内可燃混合气体爆炸模型,获得了阻隔防爆性能测试装置的燃爆容器抗爆设计限值,以及其在HAN阻隔防爆测试中燃爆容器试爆压力量级的控制下限值,同时,还给出HAN工程应用中容器留空率的计算方法,具有实际指导意义。     

Inverse modeling of multicomponent reactive transport through single and dual porosity media

Compacted bentonite is foreseen as buffer material for high-level radioactive waste in deep geological repositories because it provides hydraulic isolation, chemical stability, and radionuclide sorption. A wide range of laboratory tests were performed within the framework of FEBEX (Full-scale Engineered Barrier EXperiment) project to characterize buffer properties and develop numerical models for FEBEX bentonite. Here we present inverse single and dual-continuum multicomponent reactive transport models of a long-term permeation test performed on a 2.5 cm long sample of FEBEX bentonite. Initial saline bentonite porewater was flushed with 5.5 pore volumes of fresh granitic water. Water flux and chemical composition of effluent waters were monitored during almost 4 years. The model accounts for solute advection and diffusion and geochemical reactions such as aqueous complexation, acid-base, cation exchange, protonation/deprotonation by surface complexation and dissolution/precipitation of calcite, chalcedony and gypsum. All of these processes are assumed at local equilibrium. Similar to previous studies of bentonite porewater chemistry on batch systems which attest the relevance of protonation/deprotonation on buffering pH, our results confirm that protonation/deprotonation is a key process in maintaining a stable pH under dynamic transport conditions. Breakthrough curves of reactive species are more sensitive to initial porewater concentration than to effective diffusion coefficient. Optimum estimates of initial porewater chemistry of saturated compacted FEBEX bentonite are obtained by solving the inverse problem of multicomponent reactive transport. While the single-continuum model reproduces the trends of measured data for most chemical species, it fails to match properly the long tails of most breakthrough curves. Such limitation is overcome by resorting to a dual-continuum reactive transport model.