可发性聚苯乙烯废水处理工程的设计与运行

介绍了采用中和混凝 水解酸化 生物接触氧化 化学除磷工艺对可发性聚苯乙烯 (EPS)废水的处理工艺。在废水中的CODCr、TP、SS、NH3 N分别为 194 0mg L、112mg L、5 92mg L、2 3 6mg L的条件下 ,废水经过处理后 ,出水CODCr、TP、SS、NH3 N分别为 70mg L、0 38mg L、2 6mg L、0 32mg L ,均可达到《污水综合排放标准》中的一级标准 ,废水中CODCr、TP、SS、NH3 N的平均去除率分别为 96 4 %、99 3%、95 6 %、98 6 %。     

混凝沉淀-酸化水解-接触氧化工艺处理聚苯乙烯生产废水

采用混凝沉淀酸化水解生物接触氧化工艺处理聚苯乙烯生产废水,通过治理工程实际运行,结果表明:当废水CODCr平均浓度为1160mg/L时,CODCr去除率为882%,出水水质稳定,能达到设计要求。     

水解酸化＋两级生物接触氧化处理高盐度水产品加工废水

介绍了“水解酸化＋两级生物接触氧化”处理水产品加工废水的运行效果和工程实例，结果表明：对C1^-浓度平均6000mg／L的高盐度水产品加工废水，系统对COD、SS、氨氮的去除率分别超过了88％、90％、85％，出水COD、SS、氨氮分别低于100mg／L、70mg／L、15mg／L，出水完全可以达到《污水综合排放标准》（GB8978—1996）一级排放标准。     

等离子体技术在固体废弃物处理中的应用

简要介绍了等离子体的相关概念及其处理污染物的工作原理，阐述了等离子体技术在固体废弃物治理方面的应用研究概况，并对等离子体在固体废弃物治理中的应用作了市场前景分析，说明了该技术在固体废弃物治理中具有一定的应用前景。     

Occurence and Distribution of Polycyclic Aromatic Hydrocarbons in Ankara Precipitation

Urban atmospheric environment contains many trace organic pollutants that are related to the incomplete fuel combustion in domestic heating, industrial plants and automobile traffic. Removal of these pollutants from the atmosphere takes place through wet and dry deposition as well as chemical transformations. In this study, concentrations of polycyclic aromatic hydrocarbons (PAHs) in wet deposition samples were determined at an urban site of Turkey. Wet and dry deposition samples were collected using Andersen Rain Sampler. The sampler was modified accordingly for the collection of organic pollutants. Collected samples were preconcentrated by using solid phase extraction (SPE) disks and consecutively analyzed by Gas Chromatography-Mass Spectrometry (GC-MS). Among the 13 compounds quantified in this study, anthracene, fluoranthene, and pyrene were found more frequently and at elevated concentrations (202, 271 and 260 ng L^-1 mean concentrations, respectively).Concentrations of PAHs were found to be high in winter period.     

油田废污泥治理研究

冀东油田废水池地处环境敏感区域，对其废污泥采用固化法进行处理。在大量实验的基础上优选出了三种固化剂体系并通过多次浸泡实验、淋洗实验和静态浸出实验对固化效果进行了分析。     

Enzyme-Retted Flax Fiber and Recycled Polyethylene Composites

Municipal solid wastes generated each year contain potentially useful and recyclable materials for composites. Simultaneously, interest is high for the use of natural fibers, such as flax (Linum usitatissimum L.), in composites thus providing cost and environmental benefits. To investigate the utility of these materials, composites containing flax fibers with recycled high density polyethylene (HDPE) were created and compared with similar products made with wood pulp, glass, and carbon fibers. Flax was either enzyme- or dew-retted to observe composite property differences between diverse levels of enzyme formulations and retting techniques. Coupling agents would strengthen binding between fibers and HDPE but in this study fibers were not modified in anyway to observe mechanical property differences between natural fiber composites. Composites with flax fibers from various retting methods, i.e., dew- vs. enzyme-retting, behaved differently; dew-retted fiber composites resulted in both lower strength and percent elongation. The lowest level of enzyme-retting and the most economical process produces composites that do not appear to differ from the highest level of enzyme-retting. Flax fibers improved the modulus of elasticity over wood pulp and HDPE alone and were less dense than glass or carbon fiber composites. Likely, differences in surface properties of the various flax fibers, while poorly defined and requiring further research, caused various interactions with the resin that influenced composite properties.     

拉伸加载下老化复合固体推进剂的损伤演化定量分析

目的 定量分析老化对拉伸加载下复合固体推进剂细观损伤演化的影响规律。方法 开展不同老化时间（0、32、74、98 d）下三组元端羟基聚丁二烯（HTPB）复合固体推进剂的热加速老化试验,以及老化后推进剂的微型哑铃形试验件在不同拉伸应变水平（0、5%、10%、20%、40%、50%）下的微CT扫描观测试验,并对扫描重构图像进行定量分析,获得老化对推进剂细观损伤演化的影响规律。结果 随拉伸应变增加,老化前后推进剂微CT图像的灰度均方差、平均孔隙率和图像的分形维数均呈非线性增加趋势,图像的灰度均值呈非线性减小趋势。在较低应变水平（<10%）下,上述参数受老化时间的影响不显著,但随拉伸应变增加（≥10%）和老化时间增长,灰度均方差、平均孔隙率、孔隙率增量和分形维数的数值整体增高,而灰度均值随老化时间的增长而降低,且不同老化时间下,分形维数与平均孔隙率之间存在正线性关系。结论 重构得到微CT图像的灰度均值、平均孔隙率和分形维数可作为表征参数,用于定量分析老化复合固体推进剂在拉伸载荷下的细观损伤和损伤的动态演化规律,推进剂的初始损伤和小应变下的损伤程度受老化的影响较弱,而老化时间对推进剂细观损...     

HAN基ECSP凝胶模型的构建与分子动力学模拟

目的 从微观分子的角度对硝酸羟胺(HAN)基电控固体推进剂(Electrically Controlled Solid Propellants,ECSP)的性能参数进行模拟与计算。方法 利用分子表面静电势(ESP)对HAN分子2种可能的构型进行优化和稳定性分析。通过真空非周期性分子动力学模拟得到聚乙烯醇(PVA)分子稳定构型,并以HAN基ECSP的主要成分按一定比例构建凝胶模型。基于RESP(Restrained Electrostatic Potential)电荷生成更准确的凝胶模型拓扑文件,并进行凝胶模型的分子动力学模拟、模型稳定分析以及模型参数计算。结果 凝胶模型总能量相对平均值的周期性波动不超过7%。由于三维PVA链的包裹,H2O分子的扩散系数被大幅削弱。氢键分析和径向分布函数表明氢键键长主要分布在0.282 6 nm附近,PVA与H2O间的氢键较少,H2O与HAN、H2O与H2O之间的氢键较多。模型密度为1.405 g/cm³,与实验值吻合度高。在283、293、303 K下,HAN基ECSP凝胶模型的拉伸模量依次降低,剪切模量先增后减。在15 K/600 ps冷却速率下,HAN基ECSP凝胶模型的拉伸模量和剪切模量均增大。结论 ECSP制备结束后,冷却过程中的环境温度不宜过高,否则容易造成ECSP力学性能的快速下降,快速冷却可以提高ECSP的力学性能。     

城市垃圾焚烧飞灰特性及水泥固化试验研究

试验分析了重庆市某城市垃圾焚烧发电厂飞灰的化学成分,研究了原飞灰的浸出毒性,考察了水泥对原飞灰和酸洗预处理飞灰中重金属的固化效果. 结果表明:飞灰中重金属Pb和Zn的浸出质量浓度均超过《危险废物浸出毒性鉴别标准》(GB5085.3-2007),因而被认为是危险废物,必须对之进行稳定化处理;酸洗预处理飞灰固化试块的抗压强度得到了一定程度的提高,其重金属Pb和Zn的浸出毒性均较相同配比、相同养护时间的原飞灰固化试块有明显降低;酸洗预处理飞灰固化试块抗压强度随掺入飞灰比例的降低和养护时间的延长而加大,在养护28 d时其抗压强度最高,达4.25 MPa;酸洗预处理飞灰固化试块在养护28 d时,其重金属Pb和Zn的浸出质量浓度分别比原飞灰所制固化试块降低了10.6%～59.0%和7.4%～73.7%.