Effect of Habitat Fragmentation and Isolation on the Population of Alpine Musk Deer

The alpine musk deer (Moschus chrysogaster) is a key species of some terrestrial ecosystems, it has an important economic and conservative significance as a kind of medical animal in China. Due to the interaction between natural forces and human disturbance, the habitats of alpine musk deer are fragmented and isolated in different mountains and the populations are confronted with many problems of survival. In this paper, we discuss the impact of habitat fragmentation and isolation on alpine musk deer populations based on the investigation on the population densities and sizes and environmental factors in different reserves, as well as on the analysis of its ecological adaptability. We found that the alpine musk deer has strong ecological adaptability; the population development of alpine musk deer may benefit from the reduction of the forest area and even from the fragmentation and isolation of the habitat to a certain extent. However, deforestion should not be encouraged only for the alpine musk deer population, but should also be based on the overall consideration of biodiversity conservation.     

液-弹隔振器设计与试验分析

目的开展液-弹隔振器的设计及试验验证。方法基于反共振原理建立的液-弹隔振器动力学分析模型,推导了其动力学方程。结果建立了液弹隔振器隔振频率与相关参数的关系,依据相关参数完成了液-弹隔振器的设计,并进行了液-弹隔振器动力学性能相关试验,利用动刚度测试法和传递率测试法验证了液-弹隔振器性能,试验验证了液-弹隔振器高静态刚度和隔振频率点下的低动态刚度特点。结论实现了液-弹隔振器的设计,同时液弹隔振器在隔振频率点下达到60%的减振效果。     

海水中阴极极化对X80钢应力腐蚀及氢脆敏感性的影响

目的研究不同p H值海水中阴极极化对X80管线钢应力腐蚀及氢脆的抑制作用。方法采用慢应变速率拉伸试验、电化学测试、微观组织观察等分析方法。结果 X80钢在天然海水中的析氢电位约为-940m V(vs.SCE,下同),海水p H为3.5时析氢电位发生正移。其应力腐蚀敏感性与极化电位有很大关系,随着极化电位负移,X80钢的氢脆敏感性增加。天然海水中当极化电位负于-950 m V时,断口出现准解理断裂特征形貌。在-1050 m V极化电位下,钢材进入氢脆断裂区发生脆性断裂。海水p H为3.5时,-900 m V钢材有发生氢脆的危险。结论与天然海水相比,X80钢在p H为3.5的酸性海水中具有较高的应力腐蚀敏感性,两种海水介质中X80钢的应力腐蚀敏感性均随极化电位负移而增加。     

空间站控制力矩陀螺微振动测试技术

目的分析控制力矩陀螺的微振动扰动特性。方法通过获取陀螺连接点对结构的扰振力输出、关键部位的微振动响应来获取产品的微振动扰动特性,通过隔振的方式对外部环境的干扰进行隔离,进而降低测试的背景噪声,通过运用高精度测试传感器来实现微小扰动力信号、加速度信号的测量,利用结构有限元法及单点激励多点响应的模态分析方法校核系统刚度,进而确定测试频率范围是否满足需求。结果可同时获得空间站控制力矩陀螺连接点处的输出扰振力、质心处的输出扰振力合力、合力矩以及关键部位的微振动响应,可有效隔离外部干扰,扰振力背景噪声的时域信号最大值可控制在0.07 N以内,RMS值在0.02 N以内,加速度信号的时域背景噪声最大值可控制在1.5 mg以内,RMS值在0.1 mg以内。可识别微小扰振信号,加速度传感器分辨率为5×10-5 grms,力传感器的测量分辨率为1×10-2 N,力矩测量分辨率小于1×10-2 N·m。测试频带在320 Hz以内。结论满足型号需求,并投入型号使用。     

Y5复合产絮菌及其产絮物絮凝特性试验研究

从含大量微生物菌群的土壤中筛选出了具有产絮效果的Y5菌液。比较不同培养条件下Y5菌液的絮凝率得出 :菌液絮凝性能是其中 3种复合菌株共同作用的结果 ;培养基初始pH值在 5 .0～ 9.0的范围内时 ,Y5菌液的生长量及其上清液的絮凝率都较高。     

变速器壳体低周疲劳优化设计

目的 分析变速器壳体驻车耐久试验的失效根本原因,对变速器壳体进行低周疲劳优化设计.方法 首先排查壳体的化学成分、铸造质量,排除材料和工艺引起失效问题的可能性,然后通过有限元方法分析驻车轴孔的最大拉应变、驻车工况壳体变形、轴孔接触区域.根据局部应变分布特征,提出驻车轴修形的优化方案,并且根据壳体材料的低周疲劳参数,确定Coffin-Manson模型,并根据该模型预测壳体驻车轴孔优化前后的疲劳寿命.结果 驻车轴孔的最大拉应变高达0.95％,确定应变过大是导致壳体失效的根本原因.驻车轴度修形的优化方案将最大拉应变降低到0.40％,塑性应变占比由42％降低到5％,疲劳寿命的预测值由原来的175次提高到7980次,满足试验循环次数1000次的要求,最终优化物理样机通过了驻车耐久试验验证.结论 使用的Coffin-Manson模型参数能准确地预测变速器壳体的低周疲劳寿命,驻车轴小角度修形优化方案能够有效解决局部应变过大的失效问题,具有一定的工程参考意义.     

大型车车身覆盖件冲压成形特征分析及选材研究

为满足大型车身覆盖件冲压成形要求并实现钢板与零件的对路供应 ,必须在深入解析零件成形特征的基础上 ,确定高应变部位的成形敏感材料参数。在材料力学性能测试和成形极限分析的基础上 ,对侧围外板的冲压成形特征和成形敏感参数进行了分析。结果表明 :侧围外板零件高应变部位的变形方式为胀形 深拉延变形 ,n值和r值为影响侧围外板零件成形的主要材料敏感参数     

硫酸厂淤泥中SRB的选育及特性研究

从硫酸厂废水淤泥中分离筛选出了一株 SRB,其菌体形态呈弧状或细杆状 ,成熟细胞大小 0 .4～ 0 .6× 3 .0～ 5 .0μm,摇摆式运动 ,单极生鞭毛 ,芽孢染色阴性 ,革兰氏染色阴性 ;最适生长 p H6.0～ 6,5 ;适量氧气不会影响细菌生长 ,菌体内含过氧化氢酶。本文还探讨了该类细菌的分离培养方法 ,考察了分离菌部分生理生化特征及对硫酸盐还原能力 ,优化了培养基配方 ,并初步鉴定分离菌为脱硫弧菌     

Characterization of sulfide oxidation and optimization of sulfate production by a thermophilic Paenibacillus naphthalenovorans LYH-3 isolated from sewage sludge composting

The sulfur-containing odor emitted from sludge composting could be controlled by sulfide oxidizing bacteria, yet mesophilic strains show inactivation during the thermophilic stage of composting. Aimed to investigate and characterize the thermotolerant bacterium that could oxidize sulfide into sulfate, a heterotrophic strain was isolated from sewage sludge composting and identified as Paenibacillus naphthalenovorans LYH-3. The effects of various environmental factors on sulfide oxidation capacities were studied to optimize the sulfate production, and the highest production rate (27.35% ± 0.86%) was obtained at pH 7.34, the rotation speed of 161.14 r/min, and the inoculation amount of 5.83% by employing Box-Behnken design. The results of serial sulfide substrates experiments indicated that strain LYH-3 could survive up to 400 mg/L of sulfide with the highest sulfide removal rate (88.79% ± 0.35%) obtained at 50 mg/L of sulfide. Growth kinetic analysis presented the maximum specific growth rate µ_m (0.5274 hr⁻¹) after 22 hr cultivation at 50°C. The highest enzyme activities of sulfide quinone oxidoreductase (0.369 ± 0.052 U/mg) and sulfur dioxygenase (0.255 ± 0.014 U/mg) were both obtained at 40°C, and the highest enzyme activity of sulfite acceptor oxidoreductase (1.302 ± 0.035 U/mg) was assessed at 50°C. The results indicated that P. naphthalenovorans possessed a rapid growth rate and efficient sulfide oxidation capacities under thermophilic conditions, promising a potential application in controlling sulfur-containing odors during the thermophilic stage of sludge composting.