Deep chlorophyll maximum distribution in the central Tyrrhenian Sea described by a towed undulating vehicle

The towed undulating vehicle (TUV), named SARAGO, was used for two fine-scale surveys between the Italian and the Sardinian coasts during the Astraea 2 cruise (6-7 and 26-27 September 1995), studying the deep chlorophyll maximum distribution. SARAGO sections identify a sub-surface doming with higher chlorophyll a and primary production concentrations in the upwelling area of a cyclonic gyre region, detected by sea-surface temperature images. In the first section, the cyclone presents a double doming, in density and salinity, with shallower and concentrated patches of chlorophyll a for about 2 miles. Twenty days later, the second section shows that the gyre changes shape and extension, showing a single doming with higher primary production and chlorophyll a concentrations, distributed over a large area of about 40 nautical miles. SARAGO allows analysis of this high-variability phenomenon (cyclonic gyre) and allows concentrated patches (2 nm) to be identified, thus proving the importance of TUVs in the study of mesoscale processes.     

麻石文丘里洗涤吸收器在APV尾气处理上的应用

介绍了ＡＰＶ喷雾干燥尾气的性质，原尾气系统存在的问题，改造中采取的措施、原理、流程和取得的效果。实践证明，用“麻石文丘里一次降温、洗涤—ＸＰ型塔板二次洗涤—旋流除雾器除雾”的改造方案，取代原“换热器降温—喷淋塔洗涤—折流脱水器脱水”的流程，取得了良好的降温、洗气和除雾效果，且工程费用低。     

Life cycle energy impacts of automotive liftgate inner

This paper compares the life cycle energy use of a cast-aluminum, rear liftgate inner and a conventional, stamped steel liftgate inner used in a minivan. Using the best available aggregate life cycle inventory data and a simple spreadsheet-level analysis, energy comparisons were made at both the single-vehicle and vehicle-fleet levels. Since the product manufacture and use are distributed over long periods of time that, in a fleet, are not simple linear combinations of single product life cycles. Thus, it is all the products in use over a period of time, rather than a single product, that are more appropriate for the life cycle analysis. Using a set of consistent data, analyses also examine sensitivity to the level of analysis and the assumptions to determine the most favorable materials with respect to life cycle energy benefits.As expected, life cycle energy impacts of aluminum are lower than steel at a single-vehicle level – energy savings are determined to be 1.8 GJ/vehicle. Most energy savings occur at the vehicle operation phase due to improved fuel economy from lightweighting. The energy benefits are realized only very close to the average vehicle life of 14 years. With the incremental growth of the vehicle fleet, it takes longer – about 21 years – for aluminum to achieve life cycle equivalence with steel. The number of years aluminum needs to achieve equivalence with steel was found to be quite sensitive to aluminum manufacturing energy and fuel economy. As the steel industry races to compete with other materials for automotive lightweighting, a systems approach, instead of part-to-part comparison, is more appropriate in the determination of viability of aluminum substitution from an energy perspective.     

国内车辆可靠性强化试验技术的现状与发展趋势

车辆可靠性强化试验属于可靠性强化试验的一个应用分支.首先论述了车辆可靠性强化试验技术的理论基础;然后介绍了车辆试验场及试验道路的研究现状,综述了确定强化系数的各种方法.最后,指出车辆强化试验技术的今后的发展趋势.     

车载电子电器设备的温度变化试验

ISO16750《道路车辆电气及电子设备的环境条件和试验》系列国家标准转化已进入报批阶段。系列标准的第4部分《气候负荷》引用IEC 60068-2-14规定的试验N：温度变化（GB/T2423.22）中的试验Na：规定转换时间的温度快速变化和试验Nb：按规定温度变化速率的温度变化试验。2009年1月,IEC对60068-2-14进行了技术性改版。将IEC 60068-2-33《温度变化导则》（GB/T2424.13）的内容并入;对试验及温度变化容差的描述和要求、编辑和插图都做了修改和修订。等同采标的GB/T2423.22的改版修订工作已在进行,估计2010年稍晚就可以发布。这里就当前国际标准和将发布等同国标的试验方法对车载电子电器设备的温度变化试验进行描述,同时对试验要素和及其应用要素作一些介绍。ISO16750《道路车辆电气及电子设备的环境条件和试验》系列国家标准转化已进入报批阶段。系列标准的第4部分《气候负荷》引用IEC 60068-2-14规定的试验N：温度变化（GB/T2423.22）中的试验Na：规定转换时间的温度快速变化和试验Nb：按规定温度变化速率的温度变化试验。2009年1月,IEC对60068-2-14进行了技术性改版。将IEC 60068-2-33《温度变化导则》（GB/T2424.13）的内容并入;对试验及温度变化容差的描述和要求、编辑和插图都做了修改和修订。等同采标的GB/T2423.22的改版修订工作已在进行,估计2010年稍晚就可以发布。这里就当前国际标准和将发布等同国标的试验方法对车载电子电器设备的温度变化试验进行描述,同时对试验要素和及其应用要素作一些介绍。     

柴油车加载减速工况烟度排放测试软件开发

依据《柴油车加载减速烟度排放标准》和《柴油车加载减速工况烟度检测计算机控制试验规程》的要求,开发了柴油车加载减速工况烟度排放测试软件。详细介绍了该测试软件的功能和特点。     

Influence of driving cycles on exhaust emissions and fuel consumption of gasoline passenger car in Bangkok

The influence of different driving cycles on their exhaust emissions and fuel consumption rate of gasoline passenger car was investigated in Bangkok based on the actual measurements obtained from a test vehicle driving on a standard chassis dynamometer. A newly established Bangkok driving cycle (BDC) and the European driving cycle (EDC) which is presently adopted as the legislative cycle for testing automobiles registered in Thailand were used. The newly developed BDC is constructed using the driving characteristic data obtained from the real on-road driving tests along selected traffic routes. A method for selecting appropriate road routes for real driving tests is also introduced. Variations of keyed driving parameters of BDC with different driving cycles were discussed. The results showed that the HC and CO emission factors of BDC are almost two and four times greater than those of EDC, respectively. Although the difference in the NOx emission factor is small, the value from BDC is still greater than that of EDC by 10%. Under BDC, the test vehicle consumes fuel about 25% more than it does under EDC. All these differences are mainly attributed to the greater proportion of idle periods and higher fluctuations of vehicle speed in the BDC cycle. This result indicated that the exhausted emissions and fuel consumption of vehicles obtained from tests under the legislative modal-type driving cycle (EDC) are significantly different from those actually produced under real traffic conditions especially during peak periods.     

杭州市区机动车污染物排放特征及分担率

选取杭州市区绕城高速、快速路、主干道和民用支路4种典型道路进行工况测试,建立了2010年机动车CO、HC、NOx和PM10排放清单,获得了分车型、燃料类型、排放标准以及道路类型的机动车污染物排放分担率.结果表明,杭州市机动车的污染物排放分担率差别显著,乘用车、出租车和公交车是CO和HC排放的主要来源,重型货车和公交车是NOx和PM10排放的主要来源,且乘用车的NOx排放分担率也较大;柴油车的NOx和PM10的排放分担率远大于其保有量的贡献率,是其排放的主要来源,汽油车是CO和HC排放的主要来源;占保有量30%的国0和国I车辆,对CO、HC、NOx和PM10排放分担率分别为67%、69%、58%和82%;主干道是机动车CO、HC和NOx排放的主要来源,其排放分担率分别为66%、65%和64%,民用支路是PM10排放的主要来源,分担率为55%.     

实时尾气检测系统OEM的应用

机动车尾气排放实时检测系统OEM是基于车辆实际行驶路况的新型车载尾气检测系统。该系统突破了传统的定点尾气收集数据的局限性，能够方便快捷地获得不同路段、不同车型、不同时段的以秒为单位的尾气排放数据以及包括速度和加速度在内的瞬间车辆行驶数据。文中对OEM系统的基本原理和方法进行了简单的介绍，并给出了应用该系统在北京市交通网络测试尾气的一些初始结果。     

2010—2019年成都市机动车排污特征分析及防控措施减排效果评估

为评估2010—2019年成都市机动车防控措施的减排效果,以2010年为基准年,采用排放清单法计算了各减排措施下2019年的减排量,对比分析了4种控制措施的减排效益。结果表明：成都市机动车排污总量逐年下降,2019年PM_2.5、NO_x、VOCs、CO、SO₂和NH₃的排放量分别为0.27×10⁴、4.63×10⁴、1.70×10⁴、28.99×10⁴、0.21×10⁴和0.45×10⁴ t,主要分布在中心城区,其中重型货车对PM_2.5和NO_x贡献最大,小型客车对VOCs、CO、SO₂和NH₃贡献最大;措施中加严标准的综合减排量最大,重点减排车型为小型客车、轻型货车、公交车等,2019年6种污染物减排量分别为0.14×10⁴、2.27×10⁴、1.29×10⁴、6.77×10⁴、0.07×10⁴和0.38×10⁴ t;优化城市交通管理对小型客车和摩托车的减排效果显著,2019年6种污染物减排量分别为0.04×10⁴、0.81×10⁴、0.38×10⁴、2.55×10⁴、0.05×10⁴和0.04×10⁴ t;淘汰高排放车辆对小型客车、轻型货车等的减排较明显,2019年6种污染物减排放量分别为0.13×10⁴、0.98×10⁴、0.34×10⁴、2.62×10⁴、0.01×10⁴和0.007×10⁴ t;推广清洁能源汽车的重点减排车型为出租车和公交车,虽然可有效减少PM_2.5、NO_x的排放,但VOCs却有小幅增加,2019年6种污染物减排放量分别为0.12×10⁴、0.62×10⁴、−0.13×10⁴、0.30×10⁴、0.004×10⁴和0.000 5×10⁴ t。