城市生活垃圾焚烧灰渣及其性质分析

2002年，上海有2座生活垃圾焚烧厂将点火运动。每年将产生约18万t左右的焚烧灰渣。在决定灰渣的最终处理处置方案前，应对焚烧灰渣的性质有全面的了解。详细介绍了国外城市生活垃圾焚烧灰渣甚至生位置的不同分类，并介绍了各类灰渣的物理化学性质和工程性质，以及其重金属的浸出特征。对灰渣处理放置或有效利用时需注意的问题作了分析。     

Metal distribution characteristic of MSWI bottom ash in view of metal recovery

Bottom ash is the major by-product of municipal solid waste incineration(MSWI), and is often reused as an engineering material, such as road-base aggregate. However, some metals(especially aluminum) in bottom ash can react with water and generate gas that could cause expansion and failure of products containing the ash; these metals must be removed before the ash is utilized. The size distribution and the chemical speciation of metals in the bottom ash from two Chinese MSWI plants were examined in this study, and the recovery potential of metals from the ash was evaluated. The metal concentrations in these bottom ashes were lower than that generated in other developed countries. Specifically, the contents of Al,Fe, Cu and Zn were 18.9–29.2, 25.5–32.3, 0.7–1.0 and 1.6–2.5 g/kg, respectively. Moreover,44.9–57.0 wt.% of Al and 55.6–75.4 wt.% of Fe were distributed in bottom ash particles smaller than 5 mm. Similarly, 46.6–79.7 wt.% of Cu and 42.9–74.2 wt.% of Zn were concentrated in particles smaller than 3 mm. The Fe in the bottom ash mainly existed as hematite, and its chemical speciation was considered to limit the recovery efficiency of magnetic separation.     

云南星云湖南岸生态整治规划

阐述了高原湖泊星云湖的自然条件、污染根源和景观特点,在此基础上通过本项目星云湖南岸(一期)生态整治规划,尝试在整个流域范围内运用GIS分析生态湿地建设、农业面源污染控制和重现滨水空间等,改善星云湖的水质,提高星云湖及周边的生态旅游价值.规划采用顶端控制和底端治理相结合的策略,恢复星云湖流域的生态功能,解决星云湖流域现有...     

Leaching behavior of heavy metals from municipal solid waste incineration bottom ash and its geochemical modeling

With the increase in the number of municipal solid waste incineration (MSWI) plants constructed in China recently, great attention has been paid to the heavy metal leaching toxicity of MSWI residues. In this study, the effects of various parameters, including extractant, leaching time, liquid-to-solid ratio, leachate pH, and heavy metal content, on the release properties of Cd, Cr, Cu, Ni, Pb, and Zn from MSWI bottom ash were investigated. Partial least-squares analysis was employed to highlight the interrelationships between the factors and response variables. Both experimental research and geochemical modeling using Visual MINTEQ software were conducted to study the pH-dependent leaching behavior of these metals in fresh and weathered bottom ash, considering precipitation/dissolution and surface complexation reactions (adsorption by hydrous ferric oxide and amorphous aluminum oxide/hydroxide). The results showed that leachate pH was the predominant factor influencing heavy metal leachability. The leaching of Cu, Pb, and Zn was mainly controlled by precipitation/dissolution reactions, whereas surface complexation had some effect on the leaching of Cr, Cd, and Ni for certain pH ranges. The modeling results aggreed well with the experimental results. Part of this work was presented at the Fourth International Conference on Combustion, Incineration/Pyrolysis and Emission Control (i-CIPEC)     

Use of co-combustion bottom ash to design an acoustic absorbing material for highway noise barriers

The present study aims to determine and evaluate the applicability of a new product consisting of coal bottom ash mixed with Portland cement in the application of highway noise barriers. In order to effectively recycle the bottom ash, the influence of the grain particle size of bottom ash, the thickness of the panel and the combination of different layers with various particle sizes have been studied, as well as some environmental properties including leachability (EN-12457-4, NEN-7345) and radioactivity tests. Based on the obtained results, the acoustic properties of the final composite material were similar or even better than those found in porous concrete used for the same application. According to this study, the material produced presented no environmental risk.     

EXPERIMENTAL DREDGING TO CONVERT LAKE BOTTOM FROM ABIOTIC MUCK TO PRODUCTIVE SAND1

ABSTRACT: Conversion of muck to sand bottom was tested to increase benthic production in two eutrophic Florida lakes, and preliminary results indicate that benthos will be increased in areas converted to sand. Muck removal with a specially designed dredge, or “Mudcat,” was tested in Trout Lake. The Mudcat removed 41,650 cu. yds. of muck and exposed 17 acres of sand bottom, but 10 of those acres developed thin layers of muck, which proved too soft to be picked up by the Mudcat. Consequently, only 7 acres were satisfactorily converted. Bottom redistribution with a suction-type dredge was tested in Lake Carlton, and 14 acres were converted from muck to sand. Sand covered with muck was pumped from midlake areas to more peripheral areas of the lake where water depths were 11 to 13 feet and muck layer about 1.5 feet deep. The bottom was built up to an elevation above the previous muck elevation. Several methods for depositing the sand were tested. Level areas of sand fill developed accumulations of muck from fallout following dredging activity. Piles or dunes provided the best cost-return ratio. The bottom in filled areas changed very little during a 1½ year period following filling.     

Phytotoxicity and groundwater impacts of leaching from thermal treatment residues in roadways

The use of coal fly ash (CFA), municipal solid waste incinerator bottom ash (MSWIBA) and flue gas desulfurization residue (FGDR) in road construction has become very common owing to its economical advantages. However, these residues may contain toxic constituents that pose an environmental risk if they leach out and flow through the soil, surface water and groundwater. Therefore, it is necessary to assess the ecotoxicity and groundwater impact of these residues before decisions can be made regarding their utilization for road construction. In this study, the physico-chemical characteristics, leaching and phytotoxicity of these residues were investigated. Specifically, multivariate analyses were used to evaluate the contributions of the leaching constituents of the CFA, MSWIBA and FGDR leachates to the germination index of wheat seeds. B, Ba, Cr, Cu, Fe and Pb were found to be more toxic to the wheat seeds than the other heavy metals. Furthermore, the leached concentrations of the constituents from the CFA, MSWIBA and FGDR were below the regulatory threshold limits of the Chinese identification standard for hazardous wastes. Analyses conducted using a numerical groundwater model (WiscLEACH) indicated that the predicted field concentrations of metals from the CFA, MSWIBA and FGDR increased with time up to about 30 years at the point of compliance, then decreased with time and distance. Overall, this study demonstrated that the risks resulting from MSWIBA, CFA and FGDR leaching could be assessed before its utilization for road construction, providing crucial information for the adoption of these alternative materials.     

A quantitative estimate of potential aluminium recovery from incineration bottom ashes

The recovery of ferrous and non ferrous metals from the bottom ashes is a common practice in the most part of Europe, both for the environmental advantages of their recycle and to avoid problems of swelling and expansion that metals can cause when bottom ashes are reused in concrete production or in road construction. This paper focuses on metal recovery from bottom ashes produced in Municipal Solid Waste (MSW) incinerators, with a particular focus on aluminium. A forecasting model was developed in order to evaluate the quantity of aluminium scraps recoverable from the bottom ashes. The model was applied to the Italian situation but its validity can be extended to other countries. Focusing on Italy, by applying conventional technologies for the separation of non-ferrous metals, the amount of aluminium potentially recoverable from bottom ashes is estimated in the range from 16,500 to 21,000 tonnes at the year 2015, and from 19,000 to 28,500 tonnes at 2020.     

垃圾焚烧炉残渣处理技术探讨

简要介绍了垃圾焚烧残渣的处理技术,并就其原理、优缺点、应用现状进行了讨论,最后指出了该领域的发展方 向。     

Propagation of ethylene–air flames in closed cylindrical vessels with asymmetrical ignition

A study of explosions in several elongated cylindrical vessels with length to diameter L/D = 2.4–20.7 and ignition at vessel's bottom is reported. Ethylene–air mixtures with variable concentration between 3.0 and 10.0 vol% and pressures between 0.30 and 1.80 bara were experimentally investigated at ambient initial temperature. For the whole range of ethylene concentration, several characteristic stages of flame propagation were observed. The height and rate of pressure rise in these stages were found to depend on ethylene concentration, on volume and asymmetry ratio L/D of each vessel. High rates of pressure rise were found in the early stage; in later stages lower rates of pressure rise were observed due to the increase of heat losses. The peak explosion pressures and the maximum rates of pressure rise differ strongly from those measured in centrally ignited explosions, in all examined vessels. In elongated vessels, smooth p(t) records have been obtained for the explosions of lean C₂H₄–air mixtures. In stoichiometric and rich mixtures, pressure oscillations appear even at initial pressures below ambient, resulting in significant overpressures as compared to compact vessels. In the stoichiometric mixture, the frequency of the oscillations was close to the fundamental characteristic frequency of the tube.