北京市某高层建筑高空电磁辐射环境影响分析

选取北京市某代表性高层居民楼顶平台作为高空电磁辐射环境水平监测点进行综合场强和选频监测,评价总体电磁辐射环境水平,并分析监测区域电磁辐射能量的来源。结果表明：该高空监测区域的电磁辐射环境总体水平低于国家规定的公众照射导出限值,但高于地面水平。监测区域主要受30 km 外的中波台影响,其次是9 km 外的中央电视塔。影响最大的是639 kHz频率的中波信号,占100 kHz～300 MHz总场强的95％以上,其次是1．28 MHz频率的中波信号。提出,开展敏感建筑物规划建设时,应考虑中波的传播特性和对环境的影响。     

中波台电磁辐射叠加影响估算及与实测对比分析

以某中波电台为例,对多个不同频率的中波发射台同时运行时复合场强进行理论估算,对电磁辐射叠加影响进行分析,并将理论估算值与该台电磁辐射环境现状监测数据进行比对,得出距离发射塔近,复合场强理论估算值高于实测值,距离较远理论估算值与实测值较接近等结论。     

气相色谱分析中样品介质不同对分析结果的影响

分析了用甲醇、乙酸乙酯和二硫化碳3种不同极性的介质配制的4种苯系物样品,在不同极性的石英毛细柱、不同的分流比、宽口径石英毛细柱、宽口径玻璃毛细柱和玻璃填充柱上的测量结果。指出不同介质的有机化合物样品在气相色谱上分析时,色谱柱的极性(非极性、中等极性、强极性)、色谱柱类型(毛细柱、宽口径毛细柱、填充柱)、分流比的大小、进样方式(分流、不分流)都对数据的一致性产生影响,但采用不分流方式的宽口径毛细柱或填充柱分析可使分析结果具有一致性或更准确。     

含水率及燃烧性能等级对中密度纤维板点燃行为及安全性能影响的研究

采用锥形量热仪,在不同辐射热流强度下,对三种燃烧性能等级(B级、C级和非阻燃)的中密度纤维板在不同相对湿度(0%、50%和98%)形成的含水率条件下进行了辐射引燃实验,测得点燃时间和热释放速率等参数。利用点燃理论中热厚型积分模型,推导了不同含水率不同燃烧性能等级(防火等级)纤维板的临界辐射热通量。通过对比发现,点燃时间随着板材含水率的增加而明显增大,而临界辐射热通量则几乎不受环境相对湿度(即含水率)的影响。添加阻燃剂可延长点燃时间,使板材临界辐射热通量增加,并能有效地降低纤维板材燃烧时的热释放速率。阻燃纤维板的临界辐射热通量要明显高于非阻燃纤维板,但是阻燃纤维板材之间相比,临界辐射热通量差别不大。因而,从本质安全的角度对材料的安全性进行评价,不能将临界辐射热通量作为单一的标准,必须综合多个参数进行全面评价。     

正交设计法在刺叶墙藓土培中的应用

采用正交设计,研究了新疆的一种荒漠苔藓——刺叶墙藓的最适生长条件,包括最适基质、最适生长温度及最佳培养液的筛选。结果表明,5℃(8h)～15℃(16h)的温度,田土+砂+营养土的基质,最适合刺叶墙藓的生长;培养液的种类对其生长的影响并不明显。     

新型滤料──短纤维性能研究

短纤维作为一种滤料应用于水过滤器中，具有密度小，孔隙率大，比表面积大的优点，它在过滤进程中，滤速高，阻力小，过滤周期长，能使悬浮物脱除率达到９６％以上，是一种应用前景很好的滤料。在本文中对短纤维滤料的过滤性能作了系统地研究。     

突出煤层掘进防突技术研究

针对焦作矿区单一煤层开采特点,分析煤巷掘进突出和瓦斯涌出规律,探讨防突措施的适应性,研究出严重突出危险掘进工作面中高压注水综合措施,即在巷道两侧布置长钻孔抽放工作面前方及两侧煤体瓦斯,向掘进工作面前方应力集中带内打短钻孔进行中高压注水。边掘边抽钻孔提前抽放瓦斯,增大煤体透水性,有利于煤层注水和较高的压力水压裂破坏煤体,增加煤体透气性,提高瓦斯抽放效果。通过在严重突出矿井试验,3115m巷道未发生一次突出,巷道掘进速度平均提高一倍以上,有效解除了突出危险,大幅度提高了掘进速度。研究与实践证明,中高压注水综合防突措施具有广泛的适用性、有效性和安全性特征。     

Release Characteristics of Nutrients from Polymer-coated Compound Controlled Release Fertilizers

Reliable information regarding release characteristics of nutrients from a polymer-coated controlled release fertilizer (CRF) is essential for beneficial agronomic and environmental results. Significant knowledge regarding nitrogen release from polymer-coated urea was gained while the information regarding the release of the different nutrients contained in polymer-coated compound N–P–K CRF remains limited. An experiment in which major factors affecting the differential release of nutrients from two coated compound CRF was performed in free water, water saturated sand and sand at field capacity. In general, nitrate release was the fastest, followed by ammonium and potassium whereas phosphate was significantly slower, with a rate of linear release in free water 45–70% slower than that of nitrate. Little differences were obtained for the lag periods of nitrate, ammonium and potassium release (2–10 days) under the experimental conditions, whereas for P they were one order of magnitude larger. The main factor slowing the release was assumed to be the lower solubility of ions with P being the least soluble. Release into free water was, expectedly, somewhat faster than that into saturated sand and significantly faster as compared to sand at field capacity and particularly so for P. Raising the temperature from 20 °C to 40 °C increased the rate of linear release of the different nutrients. The energy of activation, EA_rel, estimated for the linear release, of the different nutrients, was narrow ranging between 37 to 46 (KJ mol⁻¹) whereas the mean values obtained for the two CRF, differing by 50% in coating thickness, was non-significant. However, EA_rel was significantly different in different media. The complex effect of temperature on the lag period and nutrient interactions during release deserve further investigation.     

Biodecoloration of Reactive Black 5 by the methylotrophic yeast Candida boidinii MM 4035

Azo dyes are extensively used in textile dyeing and other industries. Effluents of dying industries are specially colored and could cause severe damage to the environment. The anaerobic treatment of textile dying effluents is nowadays the preferred option, but it could generate carcinogenic aromatic amines. Recently, yeasts have become a promising alternative, combining unicellular growth with oxidative mechanisms. This work reports the characterization of the first methylotrophic yeast with dye decolorizing ability, Candida boidinii MM 4035 and some insights into its decoloration mechanism. The analysis of two selected media revealed a possible two stages mechanism of Reactive Black 5 decoloration. In glucose poor media, decoloration is incomplete and only the first stage proceeds, leading to the accumulation of a purple compound. In media with higher glucose concentrations, the yeast is able to decolorize totally an initial concentration of 200 mg/L. The entire process is co-metabolic, being largely dependent on glucose concentration but being able to proceed with several nitrogen sources. Manganese dependent peroxidase but not laccase activity could be detected during decoloration. Aromatic amines do not accumulate in culture media, supporting an oxidative decoloration mechanism of unknown ecophysiological relevance.     

Medium ‐ pressure ‐ liquid ‐ extraction (MPLE) of selected polychlorinated biphenyls from soil (MPLE II) 1

The extraction of PCBs from spiked soils using the Medium‐Pressure Liquid‐Extraction method showed good recovery rates. Comparison of MPLE and Soxhlet extraction of naturally contaminated soil showed similar results. However, too large quantities of solvents have to be used in MPLE procedure and the elution profile makes it unlikely, that the aspired separation from PAHs would be sufficient.