母岩的风化剥蚀速率与土壤允许流失量的关系 --以长江三峡坝区风化花岗岩土壤为例

土壤允许流失量的确定是一个非常复杂而又必须解决的问题，它关系到水土保持措施的布设和土壤的可持续利用。然而，发育在不同母质上的土壤，其土壤的最大允许流失量差异很大，确定这一值的依据也各不相同。在岩成土壤地区，母岩风化剥蚀速率的大小直接影响土壤的发育。是确定土壤允许流失量、分析人类加速水土流失的重要依据之一。选长江三峡黄陵背斜段风化花岗岩土壤为研究对象，根据剥蚀沉积相关原理，通过恢复古地理环境及时代，计算出新生代以来本区花岗岩的平均风化剥蚀速率为16．97mm／ka．最大剥蚀速率为49．56。又根据区内太平溪流域的泥沙资料，算出了当地现代的剥蚀速率，多年平均为297．7mm／ka，最小值为31．5mm／ka，而水利部颁布的当地土壤允许流失量为200t／km^2,a，折合为76．9mm／ka，二者相差近1．5—4．5倍。基于此。提出了确定土壤允许流失量必须参考母岩风化剥蚀速率的新观点。     

螯合树脂在线富集——火焰原子吸收光度法测定水中微量Cu,Pb,Zn,Cd

对螯合树脂在线富集，火焰原子吸收光度法进行了条件试验。试验证实方法对Ｃｕ、Ｐｂ、Ｚｎ、Ｃｄ４个元素检出浓度可达μｇ／Ｌ级，校准曲线性、样品重现性及准确度可满足测定要求。     

Influence of aluminium on the restoration potential of a terrestrial vascular plant,Portulaca Oleracea L. as a biomonitoring tool of fresh water aquatic environments

In the present study, the influence of aluminium on the regeneration potential of leaf and stem-cuttings of Portulaca oleracea was studied in order to identify a terrestrial plant species as an alternate biomonitoring toolof fresh water environment. The leaves and stem cuttings of theterrestrial plant, P. oleracea grew well in the distilled water producing adventitious and lateral roots. The aluminium treated leaves and stem cuttings showed a reduction in the growthof the adventitious and lateral roots and increase in the decay of leaves and stem cuttings with increasing aluminium concentration. The tolerance index calculated for the leaves and the stem cuttings showed that the leaves were more sensitivethan stems to aluminium. Since all the parameters studied showedconcentration dependent changes, the terrestrial plant, P. oleracea can be considered a suitable biomonitoring tool of fresh water environment besides its usage in the Al toxicity testing.     

采样系统中金属氧化物对SO2测定值影响分析

通过实验与实际工程相结合，定量描述了大气采样系统中金属氧化物的存在对ＳＯ２测定值的影响，并阐述了其反应机理，提出了相应措施。     

颗粒物质金属形态逐级提取技术问题的探讨

本文综述了国内外对颗粒物质中金属形态逐级提取测定技术方面的研究情况，重点阐述了颗粒物质金属形态分离方法，并对各相态的浸取技术和金属总量提取方法进行了讨论．从而为开展颗粒物质的金属化学形态的分析和研究，提出几点认识．     

重金属污染土壤植物修复法

重金属污染土壤的植物修复技术是近年来发展起来的一种较新的生态技术 ,其中 ,寻找重金属超富集植物是目前世界范围的研究热点。本文简要评述了重金属污染土壤的植物修复法的原理及类型 ,重金属超富集植物的应用潜力与最新展望 ,对国内外在这一领域的研究进展作一简单综述。     

人工智能在金属塑性加工领域中的应用

概述了人工智能及其 2个主要分支 (专家系统和人工神经网络 ) ,讨论了遗传算法与专家系统集成以及神经网络与模糊逻辑、专家系统集成的必要性和集成方法 ,分别介绍了专家系统和人工神经网络在塑性加工领域中的应用现状。     

一种预测左半部成形极限图的简单方法

板材成形性能的评价一般基于成形极限图(FLD)。然而，无论是经由理论计算还是实验方法来获得成形极限图依然很困难而且很耗时。提出了一种预测深拉延部分成形极限图的新方法。假设对所有钢板来说其成形极限图的形状几乎都是一样的，而深拉延变形区域内其失效厚度应变也几乎一样，据此可利用体积不变原理推导出主应变和次应变之间的关系。结果表明，根据此方法计算的左半侧(拉深应变区)成形极限图与实验获得的FLD基本一致。     

Hydrogen storage and distribution systems

Hydrogen storage and transportation or distribution is closely linked together. Hydrogen can be distributed continuously in pipelines or batch wise by ships, trucks, railway or airplanes. All batch transportation requires a storage system but also pipelines can be used as pressure storage system. Hydrogen exhibits the highest heating value per weight of all chemical fuels. Furthermore, hydrogen is regenerative and environment friendly. There are two reasons why hydrogen is not the major fuel of toady’s energy consumption: First of all, hydrogen is just an energy carrier. And, although it is the most abundant element in the universe, it has to be produced, since on earth it only occurs in the form of water. This implies that we have to pay for this energy, which results in a difficult economic task, because since the industrialization we are used to consuming energy for free. The second difficulty with hydrogen as an energy carrier is the low critical temperature of 33 K, i.e. hydrogen is a gas at room temperature. For mobile and in many cases also for stationary applications the volumetric and gravimetric density of hydrogen in a storage system is crucial. Hydrogen can be stored by six different methods and phenomena: high pressure gas cylinders (up to 800 bar), liquid hydrogen in cryogenic tanks (at 21 K), adsorbed hydrogen on materials with a large specific surface area (at T < 100 K), absorbed on interstitial sites in a host metal (at ambient pressure and temperature), chemically bond in covalent and ionic compounds (at ambient pressure), oxidation of reactive metals e.g. Li, Na, Mg, Al, Zn with water. These metals easily react with water to the corresponding hydroxide and liberate the hydrogen from the water. Finally, the metal hydroxides can be thermally reduced to the metals in a solar furnace.     

金属尾矿废弃地的生态恢复

尾矿废弃地是一种典型的退化生态系统。本文通过对其生态恢复所面临问题的研究，讨论了尾矿废弃地生态恢复的理论和方法，分析了使用外来物种对于尾矿废弃地这一独特的退化生态系统进行恢复的可能性，并探索了尾矿废弃地生态恢复的评价标准。