Prenatal prediction of childhood-onset spinal muscular atrophy (SMA) in Turkish families

Childhood-onset spinal muscular atrophy (SMA) is one of the most common neurodegenerative genetic disorders. SMN1 is the SMA-determining gene deleted or mutated in the majority of SMA cases. There is no effective cure or treatment for this disease yet. Thus, the availability of prenatal testing is important. Here we report prenatal prediction for 68 fetuses in 63 Turkish SMA families using direct deletion analysis of the SMN1 gene by restriction digestion. The genotype of the index case was known in 40 families (Group A) but unknown in the remaining 23 families (Group B). A total of ten fetuses were predicted to be affected. Eight of these fetuses were derived from Group A and two of these fetuses were from Group B families. Two fetuses from the same family in Group A had the SMNhyb1 gene in addition to homozygous deletion of the NAIP gene. One fetus from Group A was homozygously deleted for only exon 8 of the SMN2 gene, and further analysis showed the presence of both the SMN1 and SMNhyb1 genes but not the SMN2 gene. In addition, one carrier with a homozygous deletion of only exon 8 of the SMN1 gene was detected to have a SMNhyb2 gene, which was also found in the fetus. To our knowledge, these are the first prenatal cases with SMNhyb genes. Follow-up studies demonstrated that the prenatal predictions and the phenotype of the fetuses correlated well in 33 type I pregnancies demonstrating that a careful molecular analysis of the SMN genes is very useful in predicting the phenotype of the fetus in families at risk for SMA. Copyright © 2002 John Wiley & Sons, Ltd.     

Tuning the fill percentage in the hydrothermal synthesis process to increase catalyst performance for ozone decomposition

The performance of Ce-OMS-2 catalysts was improved by tuning the fill percentage in the hydrothermal synthesis process to increase the oxygen vacancy density. The Ce-OMS-2 samples were prepared with different fill percentages by means of a hydrothermal approach (i.e. 80%, 70%, 50% and 30%). Ce-OMS-2 with 80% fill percentage (Ce-OMS-2-80%) showed ozone conversion of 97%, and a lifetime experiment carried out for more than 20?days showed that the activity of the catalyst still remained satisfactorily high (91%). For Ce-OMS-2-80%, Mn ions in the framework as well as K ions in the tunnel sites were replaced by Ce⁴⁺, while for the others only Mn ions were replaced. O₂-TPD and H₂-TPR measurements proved that the Ce-OMS-2-80% catalyst possessed the greatest number of mobile surface oxygen species. XPS and XAFS showed that increasing the fill percentage can reduce the AOS of Mn and augment the amount of oxygen vacancies. The active sites, which accelerate the elimination of O₃, can be enriched by increasing the oxygen vacancies. These findings indicate that increasing ozone removal can be achieved by tuning the fill percentage in the hydrothermal synthesis process.     

Recent advances in catalytic decomposition of ozone

Ozone (O₃), as a harmful air pollutant, has been of wide concern. Safe, efficient, and economical O₃ removal methods urgently need to be developed. Catalytic decomposition is the most promising method for O₃ removal, especially at room temperature or even subzero temperatures. Great efforts have been made to develop high-efficiency catalysts for O₃ decomposition that can operate at low temperatures, high space velocity and high humidity. First, this review describes the general reaction mechanism of O₃ decomposition on noble metal and transition metal oxide catalysts. Then, progress on the O₃ decomposition performance of various catalysts in the past 30 years is summarized in detail. The main focus is the O₃ decomposition performance of manganese oxides, which are divided into supported manganese oxides and non-supported manganese oxides. Methods to improve the activity, stability, and humidity resistance of manganese oxide catalysts for O₃ decomposition are also summarized. The deactivation mechanisms of manganese oxides under dry and humid conditions are discussed. The O₃ decomposition performance of monolithic catalysts is also summarized from the perspective of industrial applications. Finally, the future development directions and prospects of O₃ catalytic decomposition technology are put forward.     

Ozone pollution characteristics and sensitivity analysis using an observation-based model in Nanjing, Yangtze River Delta Region of China

Ground-level ozone (O₃) has become a critical pollutant impeding air quality improvement in Yangtze River Delta region of China. In this study, we present O₃ pollution characteristics based on one-year online measurements during 2016 at an urban site in Nanjing, Jiangsu Province. Then, the sensitivity of O₃ to its precursors during 2 O₃ pollution episodes in August was analyzed using a box model based on observation (OBM). The relative incremental reactivity (RIR) of hydrocarbons was larger than other precursors, suggesting that hydrocarbons played the dominant role in O₃ formation. The RIR values for NO_X ranged from –0.41%/% to 0.19%/%. The O₃ sensitivity was also analyzed based on relationship of simulated O₃ production rates with reductions of VOC and NO_X derived from scenario analyses. Simulation results illustrate that O₃ formation was between VOCs-limited and transition regime. Xylenes and light alkenes were found to be key species in O₃ formation according to RIR values, and their sources were determined using the Positive Matrix Factorization (PMF) model. Paints and solvent use was the largest contributor to xylenes (54%), while petrochemical industry was the most important source to propene (82%). Discussions on VOCs and NO_X reduction schemes suggest that the 5% O₃ control goal can be achieved by reducing VOCs by 20%. To obtain 10% O₃ control goal, VOCs need to be reduced by 30% with VOCs/NO_X larger than 3:1.     

随机振动响应峰值因子的预计理论研究

简要介绍了超越概率理论、超越频次理论、损伤等效理论和功率谱密度(PSD)的时域拟合理论等4种常见的峰值因子预计理论,并基于三角级数提出了一种新的预计理论。结合试飞加速度数据样本,对比分析超越频次理论、PSD时域拟合理论和三角级数理论的预估精度。研究表明,上述4种常见的预计理论本质上属于统计学理论;PSD时域拟合理论预计的峰值因子波动较大,峰值因子与归一化次数满足高斯分布;三角级数理论的预估精度较高,但缺乏离散峰个数的合理判据。     

基于FLUS模型的湖北省生态空间多情景模拟预测

改革开放以来,中国经济在飞速发展的同时,生态环境问题日益严峻。为保障国家和地区的生态安全,对未来生态空间进行模拟预测十分必要。在长江大保护和长江经济带绿色发展背景下,以湖北省为研究区,利用FLUS模型基于湖北省2010年、2015年土地利用数据及包含自然和人文因素的15种驱动因子数据,对2035年的湖北省生态空间进行模拟预测。结果表明：利用2010年土地利用现状模拟出的2015年湖北省土地利用变化情况,总体精度达到0.976,Kappa系数达到0.961,模拟精度较高。设置的生产空间优先、生活空间优先、生态空间优先以及综合空间优化4种不同情景,基本满足未来湖北省不同发展导向的需求。从地貌单元角度来看,在不同情景下,湖北省生态空间主要分布于湖北省边陲四大山区,中部江汉平原生态空间零星分布。从数量规模上来看,不同情景下各个用地类型数量规模差异较为明显,生产空间优先情景下耕地面积增加1216 km²,生活空间优先情景下城镇用地规模增加5959 km²,生态空间优先情景下生态空间用地增长722 km²,综合空间优化情景下生态空间用地规模变化更趋于平缓。从生态空间变化分布来看,四大山区的生态空间变化不大,但中部江汉平原生态空间变化较为明显,其中从行政区划上来看,变化范围主要分布于武汉城市圈、襄阳市、宜昌市中西部地区及随州市中部地区。总而言之,FLUS模型对于湖北省生态空间模拟的适用性较好,多情景模拟结果可为湖北省未来国土空间规划及未来生态空间管控提供多角度、多方向的政策决策参考。     

2015～2018年太原市臭氧污染特征分析

基于太原市2015年1月~2019年2月的空气质量监测数据,分析了太原市近地面臭氧浓度变化特征。结果表明:2015~2018年太原市臭氧年平均浓度为78.42、82.33、95.87、103.77μg/m 3,臭氧浓度存在加速上升趋势;臭氧浓度逐日变化范围为5~270μg/m 3,共有181 d超过GB 3095—2012《环境空气质量标准》二级标准限值(160μg/m 3),超标时段主要集中于5~8月份;臭氧浓度日变化呈单峰型分布,峰值与谷值时段分别为14∶00~16∶00和6∶00~7∶00;臭氧浓度有明显的月变化规律,峰值与谷值时段分别为6~7月和1月、12月;臭氧浓度还表现出显著的季节变化规律,按浓度高低依次排序为夏季、春季、秋季和冬季;臭氧浓度与NO 2、CO、PM 2.5浓度呈负相关性。     

黄河三角洲典型地区耕地土壤养分空间预测

掌握土壤养分的分布特点是实现养分优化管理的重要基础。论文选择黄河三角洲典型地区山东省垦利县为研究区,通过田间采样与实验室化验分析获取了1 278个样本（0~20 cm）的土壤碱解氮、有效磷、速效钾数据。在经典统计分析的基础上,用地统计学方法分析了土壤养分的空间变异特征,并拟合了养分的变异函数模型。利用普通克里格法（OK）、反距离权重法（IDW）、泛克里格法（UK）、径向基函数法（RBF）和局部多项式法（LP）5种方法进行空间插值,并采用独立数据集验证对插值结果进行精度评价,进而分析了各养分空间分布规律。为深入探索各方法的适用性规律,基于AN数据设计了离散、随机、聚集3种空间分布模式的数据,利用各模型的自动优化进行试验,对比分析了不同插值方法在土壤养分空间预测中的自适应性。结果表明：1）研究区碱解氮、有效磷、速效钾均为中等强度的空间变异和中等程度的空间自相关,其变异函数模型分别为球状模型、指数模型和球状模型,决定系数依次为0.951、0.892和0.787;2）在空间分布上,土壤碱解氮、有效磷、速效钾含量与地形和土地利用类型等有关,西南部地势较高,以水浇地和旱田为主,东北部沿黄农田受黄河淡水影响,耕地质量较好,而中部地区地势低平,以水田为主,养分含量偏低;3）相对于块金系数/基台值,Moran’s I是更为稳健有效的衡量土壤养分空间自相关性的方法;4）论文认为,空间分布模式、样本量、空间自相关性和空间聚集程度（最近邻比）均影响插值精度。在离散模式下,各方法自适应性均较差;在随机模式下,IDW与RBF自适应性优于OK和LP;在聚集模式下,各方法自适应性与样本量和空间自相关性有关,直至样本足够多时,4种插值方法精度接近。论文探明了研究区主要土壤养分的最佳插值预测方法,分析了土壤养分的变异特征和空间分布规律,为黄河三角洲典型地区耕地土壤养分利用管理和农业可持续发展提供了理论依据。     

大气自净能力指数的气候特征与应用研究

为了定量地评估污染气象条件对空气污染的作用并实现对空气污染潜势的预报,本文在城市大气污染数值预报系统（CAPPS）预报原理的基础上,定义了大气自净能力指数,并分别给出了采用气象站观测资料和通过数值模拟计算大气自净能力指数的方法.基于气象站观测资料的全国大气自净能力指数分析计算表明,全国大气自净能力最差的地区分布在四川盆地和新疆塔里木盆地,大气自净能力最强的地区分布在青藏高原、蒙古高原、云贵高原、以及东北平原和三江平原、山东半岛和海南岛;1961~2017年,京津冀、长三角和珠三角地区的大气自净能力指数呈下降的变化趋势,全年低自净能力日数呈上升的变化趋势.采用大气自净能力指数评估2014年北京APEC会议期间大气污染防控效果,表明在11月8~10日极端不利扩散气象条件发生时,减排措施使北京市空气质量AQI平均降低77%,使京津冀平原地区11个城市的空气质量AQI平均降低37%.基于国家气候中心月动力延伸气候预测模式（DERF2.0）的预报产品和中尺度模式（WRF）,建立了可以预测全国未来40d逐日大气自净能力指数的延伸期-月尺度大气污染潜势预测系统,回报实验表明,在大多数情况下可以提前15d预报出大气重污染过程;月尺度的大气重污染过程预报效果更大程度上取决于月动力延伸气候预测模式（DERF2.0）的预报准确率.     

Regionalization based on spatial and seasonal variation in ground-level ozone concentrations across China

Owing to the vast territory of China and strong regional characteristic of ozone pollution,it's desirable for policy makers to have a targeted and prioritized regulation and ozone pollution control strategy in China based on scientific evidences. It's important to assess its current pollution status as well as spatial and temporal variation patterns across China.Recent advances of national monitoring networks provide an opportunity to insight the actions of ozone pollution. Here, we present rotated empirical orthogonal function(REOF)analysis that was used on studying the spatiotemporal characteristics of daily ozone concentrations. Based on results of REOF analysis in pollution seasons for 3 years' observations, twelve regions with clear patterns were identified in China. The patterns of temporal variation of ozone in each region were separated well and different from each other, reflecting local meteorological, photochemical or pollution features. A rising trend in annual averaged Eight-hour Average Ozone Concentrations(O_3-8 hr) from 2014 to 2016 was observed for all regions, except for the Tibetan Plateau. The mean values of annual and 90 percentile concentrations for all 338 cities were 82.6 ± 14.6 and 133.9 ± 25.8 μg/m~3,respectively, in 2015. The regionalization results of ozone were found to be influenced greatly by terrain features, indicating significant terrain and landform effects on ozone spatial correlations. Among 12 regions, North China Plain, Huanghuai Plain, Central Yangtze River Plain, Pearl River Delta and Sichuan Basin were realized as priority regions for mitigation strategies, due to their higher ozone concentrations and dense population.