Stability of a Coal Waste Artificial Reef

The feasibility of using U.K. coal-fired power station waste materials for artificial reef production is being examined. in June, 1989, an experimental artificial reef was constructed in Poole Bay, off the central south coast of the U.K., using three different mixtures of pulverised fuel ash (PFA), flue gas desulphurisation (FGD) gypsum and slurry, stabilized with cement and formed into blocks. Fifty tonnes of 40 × 20 × 20 cm blocks were formed into eight conical reef units replicating three different PFA/gypsum mixtures and one concrete control. the reef structure is 10m below chart datum on a flat sandy sea-bed.

Combustion of coal concentrates the heavy metal content in the resultant ash. the purpose of stabilization of the ash as blocks is twofold: to immobilize heavy metals (or other components) and to provide hard substratum for the attachment of organisms. to examine the effectiveness of this stabilization and hence the environmental compatibility of the block materials, heavy metal (Cd, Cr, Cu, Pb, Mn, Ni, Zn) content of the blocks has been monitored routinely over two years, to determine leaching rates. Sectional profiles indicate partial replacement of calcium content by magnesium. Associated with this there has also been some redistribution of heavy metals. Only in the case of cadmium has there been a detectable loss from the surface of blocks. Chromium and manganese concentrations appear to have increased. the metal content of the reef epibiota (including ascidians, Ascidia mentula; hydroids, Halecium spp.; bryozoans, Bugula spp. and red algae) growing on the ash blocks has been compared to that of epibiota attached to the concrete controls and surrounding sea-bed. to date no evidence of excess bioaccumulation of metals has been detected.

The physical integrity of the ash reef blocks has been maintained. There is evidence that the blocks are increasing in compressive strength.

An indication of the fishery enhancement potential of the experimental structure is given by the presence of eight commercially fished species (crustaceans and molluscs) including lobsters (Homarus gammarus).     

免烧免蒸粉煤灰砖的研究

本文讨论了免烧免蒸粉煤灰砖的生产原理，制造技术。试验结果表明利用化学复合外加剂能够成功地生产出免烧免蒸粉煤从砖，且产品质量达到红砖１００号的标准。文中还分析了生产粉煤灰砖的经济效益和社会效益。     

利用粉煤灰生产建材产品

阐述用燃煤电厂固体废物粉煤灰生产建材产品方案技术对比、粉煤灰砖生产工艺及技术。     

浅谈粉煤灰综合治理及建议

介绍了大庆石油化工总厂热电厂自投产以来，粉煤灰综合治理的经过，所采取的措施，存在的问题和收到的成效。这对于我国高寒平原地区的燃煤电厂有一定的借鉴参考作用。     

煤飞灰中铬铁元素的形态分析研究

用连续提取法将煤飞灰中的铬、铁元素依结合态区分为水溶态,交换态,表面氧化物和碳酸结合态,铁锰氧化物结合态,金属有机物和硫化物结合态,磁性四氧化三铁结合态和硅铝酸盐矿物态,用原子吸收法及X-衍射分析进行测定。并对煤飞灰化学形态分布进行了讨论。     

Stabilization and utilization of hospital waste as road and asphalt aggregate

This article reports the operational results of the effective utilization of hospital waste molten slag produced using a high-temperature melting system, and being operated at a hospital in Selangor, Malaysia. The hospital waste is incinerated and subsequently melted at 1200°C. Scanning election microscope (SEM)/EDX results showed that the slag produced after melting contained amounts of SiO₂, CaO, and Al₂O₃ in excess of 53%, 9%, and 16%, respectively. The results from a leaching analysis on the slag produced proved that the melting process had successfully stabilized the heavy metals. The use of this slag as an alternative material to replace conventional aggregates for road construction was studied. The results from aggregate and asphalt mix tests showed that the slag produced fulfills all the requirements of an alternative aggregate. The average asphalt content, or the optimum asphalt content to be mixed with hospital waste molten slag, was found to be about 5.53%.     

The effect of Na and Ca salts on MSWI bottom ash activation for reuse as a pozzolanic admixture

In this study the possibility of both chemical and combined chemical + thermal activation of municipal solid waste incinerator bottom ash was investigated. A number of chemical activators including Na₂SiO₃·9H₂O, NaOH, Na₂SO₄ and CaCl₂·2H₂O were individually added at varying concentrations to bottom ash/Portland cement mixtures having different bottom ash contents. The effect of the selected compounds was evaluated in terms of macroscopic properties including mechanical strength and composition of cementitious materials/water slurries. The results showed that Na-based activators were not capable of improving the characteristics of the cementitious products if compared to Portland cement under both normal and accelerated curing. Conversely, the use of calcium chloride at 40 °C-curing did promote the pozzolanic properties of bottom ash, leading to UCS values of 45.5 and 60.0 MPa after 10 and 20 days, respectively, as opposed to a value of 43.6 MPa obtained after 28 days for Portland cement under normal curing conditions.     

模拟煤灰渣垂直潜流人工湿地的除磷性能分析

为确定煤灰渣作为垂直潜流人工湿地基质的可行性,通过静态吸附实验和煤灰渣去除生活污水中的磷素实验,表明煤灰渣对污水中磷素的吸附平衡时间较短,吸附速率较快.当温度降低时,煤灰渣的磷素吸附容量对吸附平衡浓度依赖性和吸附强度随之降低,最大理论吸附容量亦降低 83.10% .在处理0.5 m 3 /(m2·d)的生活污水中,煤灰渣对TP的平均去除率达86.03%,吸附方式包括物理吸附和化学吸附,同时得出煤灰渣最大磷素解析量占最大理论吸附容量的0.73%,在实际人工湿地应用中应注意磷素解析而形成的二次污染.     

Optical and Chemical Methods of Metal Ash Analysis and Tin Recovery

‘Metal ash’ presents a waste disposal problem in most of the developing countries as the industries employ obsolete technologies. In this paper we describe analysis of tin ash, zinc ash and aluminium ash by means of optical methods, such as X-ray diffraction (XRD), inductively coupled plasma mass spectrometry (ICP-MS), electron probe micro analysis (EPMA), scanning electron microscopy (SEM) and chemical methods. The results of tin ash obtained by XRD method matched well with the cassiterite, a naturally occurring mineral of tin. ICP-MS studies reveal the presence of a large number of tracer metals, which may cause pollution by tertiary dispersion and this aspect is discussed. Conversely, the data generated by chemical methods are limited. However, the methods are simple and cost-effective. Then, they can easily be adopted by low-budget industries. Simple and cost-effective process to recover tin from tin ash is described. It is based on heating tin ash with sodium cyanide to about 900°C to separate tin component from the metal ash. The process recovers good quality tin and offers a very high yield. The process can be scaled up to small pilot plant.     

粉煤灰负载壳聚糖去除水中低浓度磷的研究

磷是富营养化限制因子,同时,中国主要能源是煤,每年会产生大量的粉煤灰废弃物;壳聚糖广泛存在于自然界,在水处理中的应用前景广阔。利用粉煤灰负载壳聚糖处理水中的磷既可以减少水中的污染物质,成本低,耗能少,又可以使固体废物得到有效的利用。实验中,以粉煤灰负载壳聚糖作为吸附剂,对磷酸盐的吸附进行了实验研究。讨论了废水的pH值、吸附平衡时间、吸附剂的投加量和吸附温度等各个因素对磷酸盐去除率的影响。研究表明:在粉煤灰负载壳聚糖的投加量为6 g/L、废水浓度为3 mg/L、吸附温度为30℃、吸附时间为30 min的条件下,P的去除率可达90%左右。