压电复合阻尼减振材料和压电复合吸声降噪材料中压电陶瓷应用形态研究

我们曾经将压电陶瓷粉体复合到传统的吸声降噪材料与阻尼减振材料中 ,制作出了性能更好的新型吸声降噪材料和新型阻尼减振材料 ;而且还发现废品压电陶瓷的粉体与正品压电陶瓷的粉体具有相同的功效[1～4 ] ,分析了它们同样发挥压电效应的原因。     

Recycling and recovery routes for incinerated sewage sludge ash (ISSA): A review

The drivers for increasing incineration of sewage sludge and the characteristics of the resulting incinerated sewage sludge ash (ISSA) are reviewed. It is estimated that approximately 1.7 million tonnes of ISSA are produced annually world-wide and is likely to increase in the future. Although most ISSA is currently landfilled, various options have been investigated that allow recycling and beneficial resource recovery. These include the use of ISSA as a substitute for clay in sintered bricks, tiles and pavers, and as a raw material for the manufacture of lightweight aggregate. ISSA has also been used to form high density glass–ceramics. Significant research has investigated the potential use of ISSA in blended cements for use in mortars and concrete, and as a raw material for the production of Portland cement. However, all these applications represent a loss of the valuable phosphate content in ISSA, which is typically comparable to that of a low grade phosphate ore. ISSA has significant potential to be used as a secondary source of phosphate for the production of fertilisers and phosphoric acid. Resource efficient approaches to recycling will increasingly require phosphate recovery from ISSA, with the remaining residual fraction also considered a useful material, and therefore further research is required in this area.     

Radionuclide content of building materials and associated gamma dose rates in Egyptian dwellings

Studies have been carried out to determine the natural radioactivity in some building materials (bricks, tiles, marble and ceramics) and their associated radiation hazard. The radioactivity concentrations of ²²⁶Ra ²³²Th and ⁴⁰K were measured using a gamma spectrometer with a Hp–Ge detector. The activities of ²³⁸U and ²³⁴U were measured using an alpha-spectrometer with a surface barrier detector after applying a radiochemical procedure. The ²³⁴U/²³⁸U isotopic ratios were calculated. The radium equivalent activities and the radiation hazard index associated with the natural radionuclides were calculated. A computer program was developed and applied to calculate the dose rate a person will receive from the walls of a room constructed from the studied building materials.     

压电陶瓷废料在阻尼减振材料中的应用

首次将压电陶瓷生产过程中产生的废料复合进阻尼减振沥青 ,既解决了压电陶瓷废料的处理问题 ,又制作出了性能更好的沥青基复合阻尼减振材料     

Effect of ceramic industrial particulate emission control on key components of ambient PM10

The relationship between specific particulate emission control and ambient levels of some PM₁₀ components (Zn, As, Pb, Cs, Tl) was evaluated. To this end, the industrial area of Castellón (Eastern Spain) was selected, where around 40% of the EU glazed ceramic tiles and a high proportion of EU ceramic frits are produced. The PM₁₀ emissions from the ceramic processes were calculated over the period 2000–2006, taking into account the degree of implementation of corrective measures throughout the study period. Abatement systems were implemented in the majority of the fusion kilns for frit manufacture in the area as a result of the application of the Directive 1996/61/EC, leading to a marked decrease in PM₁₀ emissions. By contrast, emissions from tile manufacture remained relatively constant because of the few changes in the implementation of corrective measures. On the other hand, ambient PM₁₀ levels and composition measurements were carried out from 2002 to 2006. A high correlation between PM₁₀ emissions from frit manufacture and ambient levels of Zn, As, Pb and Cs (R² from 0.61 to 0.98) was observed. On the basis of these results, the potential impact of the implementation of corrective measures to reduce emissions from tile manufacture was quantified, resulting in a possible decrease of 3–5 μg/m³ and 2 μg/m³ in ambient mineral PM₁₀ (on an annual basis) in urban and suburban areas, respectively. This relatively simple methodology allows us to estimate the direct effect of a reduction in primary particulate emissions on ambient levels of key particulate components, and to make a preliminary quantification of the possibilities of air quality improvement by means of further emission reduction. Therefore, it is a useful tool for developing future air quality plans in the study area and in other industrialised areas.     

Dibenzo-p-dioxins in the environment from ceramics and pottery produced from ball clay mined in the United States

Processed ball clay samples used in the production of ceramics and samples of the ceramic products were collected and analyzed for the presence and concentration of the 2,3,7,8-Cl substituted polychlorinated dibenzo-p-dioxins and -furans (PCDDs/PCDFs). The processed ball clay had average PCDD concentrations of 3.2 ng/g toxic equivalents, a congener profile, and isomer distribution consistent with those found previously in raw ball clay. The PCDF concentrations were below the average limit of detection (LOD) of 0.5 pg/g. The final fired ceramic products were found to be free of PCDDs/PCDFs at the LODs. A consideration of the conditions involved in the firing process suggests that the PCDDs, if not destroyed, may be released to the atmosphere and could represent an as yet unidentified source of dioxins to the environment. In addition, the PCDDs in clay dust generated during manufacturing operations may represent a potential occupational exposure.     

Dibenzo-p-dioxins in the environment from ceramics and pottery produced from ball clay mined in the United States

Processed ball clay samples used in the production of ceramics and samples of the ceramic products were collected and analyzed for the presence and concentration of the 2,3,7,8-Cl substituted polychlorinated dibenzo-p-dioxins and -furans (PCDDs/PCDFs). The processed ball clay had average PCDD concentrations of 3.2 ng/g toxic equivalents, a congener profile, and isomer distribution consistent with those found previously in raw ball clay. The PCDF concentrations were below the average limit of detection (LOD) of 0.5 pg/g. The final fired ceramic products were found to be free of PCDDs/PCDFs at the LODs. A consideration of the conditions involved in the firing process suggests that the PCDDs, if not destroyed, may be released to the atmosphere and could represent an as yet unidentified source of dioxins to the environment. In addition, the PCDDs in clay dust generated during manufacturing operations may represent a potential occupational exposure.