Embodied energy and emergy evaluation of a typical biodiesel production chain in China

Biodiesel from non-grain feedstock has been considered as one of the proper substitutes for fossil fuels associated with a series of activities emerging in China in order to meet the resource shortage and develop the energy crops. This paper presents an ecological accounting framework based on embodied energy, emergy, and CO₂ emission for the whole production chain of biodiesel made from Jatropha curcas L. (JCL) oil. The energy and materials invested in and CO₂ emission from the whole process, including cropping, transportation, extraction, and production, are accounted and calculated. Also, E_mCO₂, the ratio of real CO₂ released to the emergy-based sustainability indicator per joule biodiesel, is proposed in this paper to present a new goal function for low-carbon system optimization. Finally, the results are compared with those of the bioethanol (wheat) production in Henan Province, China, and bioethanol (corn) production in Italy in view of the indices of embodied energy, emergy and CO₂ emissions and E_mCO₂.     

Validation of a hybrid life-cycle inventory analysis method

The life-cycle inventory analysis step of a life-cycle assessment (LCA) may currently suffer from several limitations, mainly concerned with the use of incomplete and unreliable data sources and methods of assessment. Many past LCA studies have used traditional inventory analysis methods, namely process analysis and input-output analysis. More recently, hybrid inventory analysis methods have been developed, combining these two traditional methods in an attempt to minimise their limitations. In light of recent improvements, these hybrid methods need to be compared and validated, as these too have been considered to have several limitations. This paper evaluates a recently developed hybrid inventory analysis method which aims to improve the limitations of previous methods. It was found that the truncation associated with process analysis can be up to 87%, reflecting the considerable shortcomings in the quantity of process data currently available. Capital inputs were found to account for up to 22% of the total inputs to a particular product. These findings suggest that current best-practice methods are sufficiently accurate for most typical applications, but this is heavily dependent upon data quality and availability. The use of input-output data assists in improving the system boundary completeness of life-cycle inventories. However, the use of input-output analysis alone does not always provide an accurate model for replacing process data. Further improvements in the quantity of process data currently available are needed to increase the reliability of life-cycle inventories.     

The Weyekin Principle: Toward an Embodied Critical Rhetoric

This essay offers the weyekin principle to address the symbol–material, human–nature dualisms found in much of our theory and critiqued by a growing number of environmental communication scholars. The authors see two core requirements for transforming our engagement with the nonhuman: first, a way of attending to or interpreting natural phenomena that opens our awareness to other-than-symbolic modes of experience; and second, an embodied critique that expresses the inherent tensions of the symbolic–material interface.     

Planning routes around the world: International evidence for southern route preferences

Three studies test whether the southern route preference, which describes the tendency for route planners to disproportionately select south- rather than north-going routes, can be attributed to regional elevation patterns; specifically, we ask whether this effect replicates in three topographically disparate international regions, one of which is characterized by higher elevations to the north and lower to the south (Padua, Italy), and two characterized by higher elevations to the south and lower to the north (Enschede, Netherlands; Sofia, Bulgaria). In all cases, we found strong evidence that route planners disproportionately select south- rather than north-going routes at rates exceeding chance. We conclude that the southern route preference is driven by strong associations between canonical direction and perceived effort of route traversal; these effects are somewhat perplexing given that such associations are not founded in the reality of physical space.     

A revised calculation of the econometric factors α- and β for the Extended Exergy Accounting method

Extended Exergy Accounting (“EEA”) is a method to compute the space- and time integral of the primary exergy required to produce a good or a service: the extended exergy of a commodity measures its “embodied exergy”, including externalities (Labour, Capital and Environmental Costa). A crucial point of the method is the calculation of two econometric coefficients, commonly referred to as “α” and “β”,used to calculate the extended exergy equivalents of Labour and Capital respectively. In previous applications of the EEA method, these coefficients have been assigned approximate values estimated on the basis of global system considerations. In this paper, a novel procedure is described that leads to the calculation of “exact” values of both econometric coefficients, based on detailed exergy- and monetary balances of the Society to which the EEA is applied. It is shown that both α and β depend in a non-trivial way from the consumption patterns, the technological level and the life- and socio-economic standards of each Country. It is also shown that the values are substantially different for developed (OECD) and underdeveloped Countries, and representative samples of values are calculated and critically analysed. On the basis of these new model coefficients, the specific exergy equivalents of Labour (ee_L) and of Capital (ee_K) are calculated, and shown to differ from the values used in previous EEA calculations.     

Comparing indicators to rank strategies to save potable water in buildings

The main objective of this paper is to compare indicators based on energy consumption and financial savings to rank strategies to save potable water in buildings. The method is based on potable water savings, embodied energy, energy consumption for operation, and investment feasibility analysis; and it was applied to a school in the city of Florianópolis, southern Brazil. The strategies considered to save potable water were rainwater, greywater, water-efficient appliances, and their combinations. The embodied energy was estimated using indices of embodied energy per mass of material, and labour. The indicators used to rank the strategies were potential for potable water savings, index between potable water savings and embodied energy or total energy consumption, net present value, internal rate of return, discounted payback, and index between potable water savings and initial costs. All strategies and combinations were feasible, but the use of water-efficient appliances was the best. Amongst the indicators used to rank the strategies, five of them led to the same ranking. Such indicators can be applied to rank potable water saving strategies in other types of buildings and climates.     

Embodied energy and CO2 in UK dimension stone

A process based life cycle assessment of dimension stone production in the UK has been carried out according to PAS 2050. From a survey of eight production operations, on a cradle-to-site basis for UK destinations the carbon footprint of sandstone is 77 kgCO₂e/tonne, that of granite is 107 kgCO₂e/tonne and that of slate is 251 kgCO₂e/tonne. These values are considerably higher for stone imported from abroad due to the impact of transport. Reducing the reliance on imported stone will contribute to emissions reduction targets as well as furthering the goals of sustainable development.     

Impacts of international trade on carbon flows of forest industry in Finland

Finland is a forested country with a large export oriented forest industry. In addition to domestic forest extraction, roundwood is imported, thus displacing the environmental impacts of harvests. In this paper, we analyse the international carbon flows of forest industries in Finland from a consumption-based perspective. Quantitative analyses are available on trade embedded emissions of CO₂ from fossil fuel combustion, and here we address in a similar way the impact of trade on the carbon budget of the forest products sector in Finland. Carbon flows through the forest industry system increased substantially between 1991 and 2005. We show that the annual carbon balance related to forests and forest industry system in Finland functioned as a sink in 1991, whereas in 2005 the system was a sink on a national level, but not on a global level. Through calculating the carbon content in traded forest industry products and emissions embodied in forest industry activities, we further show that the direct impacts of the forest industry in Finland are only a minor fraction of the total CO₂ emissions related to Finnish production. Nearly all of the emissions were caused due to production of exports. Yet, direct carbon dioxide emissions of the industrial production are reported to Finland in the production based inventories.