Environmental aftermath of the radiation accident at Tomsk-7

An analysis is presented of the environmental effects of the most serious radiation accident recorded after Chernobyl, which occurred in the formerly secret town of Tomsk-7 in Siberia, Russia, on 6, April 1993. Fortunately, it appears not to have become a major industrial crisis or disaster. The causes of the accident are described. It is argued that a mixture of both objective and subjective prerequisites, including specific human, organizational, and technological factors, were responsible for the explosion or directly facilitated it. The Tomsk-7 accident's ecological, medical, social, and psychological consequences are discussed.     

中国居民及动植物的环境激素暴露研究现状和建议

环境激素污染严重威胁着人类及动植物的健康。综述了EDCs生物危害,简要介绍了美国、日本和欧盟的EDCs研究工作,分析了中国居民和动植物的EDCs暴露现状,归纳了现有的流行病学调查信息,并针对现状提出了建议。     

Comparison of manufactured and black carbon nanoparticle concentrations in aquatic sediments

In this paper, we show that concentrations of manufactured carbon-based nanoparticles (MCNPs) in aquatic sediments will be negligible compared to levels of black carbon nanoparticles (BCNPs). This is concluded from model calculations accounting for MCNP sedimentation fluxes, removal rates due to aggregation or degradation, and MCNP burial in deeper sediment layers. The resultant steady state MCNP levels are compared with BCNP levels calculated from soot levels in sediments and weight fractions of nanosized fractions of these soot particles. MCNP/BCNP ratios range from 10⁻⁷ to 10⁻⁴ (w:w). This suggests that the often acclaimed effect of MCNPs on organic pollutant binding and bioavailability will likely be below the level of detection if natural BCNPs are present, even if binding to MCNP is one to two orders of magnitude stronger than to BCNPs. Furthermore, exposure and toxic effects of MCNPs in sediments and soils will be negligible compared to that of BCNPs.     

Substance-related environmental monitoring

Background  Due to the requirements of the EU Water Framework Directive and other legal regulations (e.g., national laws like the German Federal Soil Protection Act), but also due to the implementation of the new EU chemicals management system REACH, environmental monitoring will gain increasing importance for the surveillance of environmental quality as well as for the assessment of chemicals. Against this background, the Work Group on ‘Environmental Monitoring’ of the Division of ‘Environmental Chemistry and Ecotoxicology’ within the German Chemical Society has compiled a position paper on substance-related environmental monitoring. Scope  Core elements of this position paper are the definitions of important terms like monitoring, exposure monitoring, effect monitoring, and integrated monitoring. Moreover, temporal and spatial aspects (monitoring of spatial distributions, trend monitoring, and retrospective monitoring) and their applications are discussed. The main focus of this position paper is the coverage of aspects which have to be observed for the preparation and implementation of a monitoring program. Essential is the clear specification of the targets of the monitoring which determine the development of the monitoring concept and its realization, e.g., if environmental media (compartments) or organisms are most appropriate as samples for the aim of the study. Of course, also the properties of the target substances are important (e.g., lipophilicity/bioaccumulation as pre-requisite for an exposure monitoring with organisms). Finally, the monitoring phases of sample planning, sampling, storage and transport of samples, selection of analytical methods, quality assurance measures as well as reporting are discussed. Perspectives  An important issue for the future is to link the quantification of chemicals in environmental compartments (exposure and pollution monitoring) more closely to the study of biological effects (effect monitoring) than has been the case up to now. Furthermore, by inclusion of a spatial differentiation, a comprehensive evaluation of the state of an ecosystem can be obtained and the relevance of the results improved. Practical examples of monitoring studies which illustrate various aspects covered in this position paper will be presented in a series of publications by members of the Work Group in the following issues of this journal.

On experimental setup in bioelectromagnetics

Bioeffects created by electromagnetic field (EMF) are the subject of intensive studies. This paper critically considers estimations of exposure to EMF in bioelectromagnetic experiments. Results of calculations presented herein show the significant role of the presence of conducting bodies (the exposure system) near an object under test on EMF energy absorption as well as mutual interactions between simultaneously exposed objects. Our aims herein are twofold: firstly to find a way to refer measurement results to free-space conditions in order to enable comparison of results obtained in different laboratories, and secondly to show that EMF energy absorption in any exposed object is different and that this difference is a function of the size of the exposure system, the number of exposed objects, and the particular properties (i.e., the electromagnetic structure) of the objects. In the authors’ opinion the existence of interactions caused by the presence of the exposure system and other exposed objects is a reason why remarkable differences are observed between experiments performed even under supposedly identical conditions. The presented considerations and conclusion suggest wider participation of physicists and engineers in bioelectromagnetic experiments in order to ensure the correctness of metrological aspects of these experiments.     

Absence behavior as traffic crash predictor in bus drivers

Problem

Various indicators of health have been shown to be associated with traffic crash involvement. As general health is also related to absence from work, the latter variable may be more strongly related to crashes, especially for professional drivers.

Method

Bus driver absence from work was analyzed in association with their crash records. Two British samples and one Swedish sample were used.

Results

One of the British samples yielded fair correlations between crash record and absence, while for the other the effect was restricted to the first three months of driving. The Swedish data had effects in the expected direction but these were not significant.

Discussion

The use of an indirect, overall measurement of health, may be a viable method for predicting the traffic crash involvement for professional drivers, although replications are needed in larger samples and other populations.

Impact on industry

The use of absence records for the identification of at risk drivers would seem to be a simple and useful method for companies with major fleets, and it also shows the importance of promoting employee health and well being at work as a potential method of reducing the cost, not only of absenteeism, but also of crashes in company vehicles.     

Air quality and deposition of trace elements in Didouche Mourad, Algeria

Total suspended particulate matter and deposition fluxes of particles were investigated in the town of Didouche Mourad which is located 13 km north of Constantine. Samples of air particulate matter were collected at one site located in the heart of the town and situated 3 km north of a cement plant. Samples were collected from 2 November 2002 to 28 April 2003 every 3 days using a high volume air sampler. Sampling intervals were 24 h in all cases. During the same period, samples of dust fallout were collected at the same site. Samples were collected at 30-day intervals. Lead, chromium, manganese, nickel, copper, cobalt and cadmium deposition fluxes were measured and both the soluble and insoluble fractions were determined. Furthermore, the information gathered by this study was correlated with the corresponding hourly weather data provided by a weather station installed at the study station. The possible sources for dust and trace metals were analyzed by comparing average contributions of wind aspects to the concentrations and depositions of mass and chemical species with the average frequencies of wind direction. The mean concentration was 300 μg/m³. The average dust deposition rate through the period of study was 221 mg/(m².day). Results indicate that anthropogenic sources contribute greatly to trace elements. An exposure assessment to the heavy metals taking into account the inhalation route and soil dust ingestion was carried out and allowed direct comparison of trace metal intakes via these routes.     

Physicochemical substance properties as indicators for unreliable exposure in microplate-based bioassays

In the last years many efforts were made to transform standardized algal test protocols into low-cost microplate assays. While advantages were pointed out frequently, limitations are not systematically addressed, thus hindering a widespread utilisation. In this study a group of organic substances with a wide distribution of volatility (log K_AW from −6.53 to −2.13) and lipophilicity (log K_OW from 1.26 to 4.92) was investigated with respect to the influence of these physicochemical properties on their algal toxicity in different assays. Therefore the EC₅₀ values were determined with a microplate assay based on ISO 8692 protocol and the results were compared with those of an established algal growth inhibition test conducted in air tight glass vessels. Using the ratio of the EC₅₀ values, a clear connection between biological response and volatility as well as lipophilicity of test substances could be detected. Chemicals with a log K_OW higher than 3 or a Henry coefficient log K_AW higher than −4 were identified as less effective in the microplate assay than in the comparative assay. The loss in nominal concentration due to physicochemical properties could be shown to contribute to this using HPLC analysis. Consequently, when using microplate assay’s one should be aware that lipophilic and volatile chemicals might be underestimated in their toxicity, which could be indicated from evaluating related physicochemical properties modelled from structural information prior to an experimental investigation.     

An evaluation of lead concentrations in imported hot sauces

In the last decade, the U.S. Food and Drug Administration (FDA) has issued several warnings and recalls for food products that exceed FDA standards for lead. Products containing chili peppers and salt were often suspected as sources of lead contamination, and included items such as candy that are routinely investigated. However, products such as hot sauces that contain similar ingredients have not been the focus of evaluations. This study quantified lead concentrations in imported hot sauces, evaluated product compliance to existing United States standards, and calculated potential dietary lead exposure for children using the Integrated Exposure Uptake Biokinetic Model. Finally, recommendations for reducing the risk of lead exposure from hot sauces are provided. Twenty-five (25) bottles of imported hot sauces manufactured in Mexico and South America were purchased in Clark County, Nevada. All hot sauces were analyzed for lead concentrations, pH, and leaded packaging. Hot sauces were analyzed by inductively coupled plasma mass spectrometry and packaging was analyzed using x-ray fluorescence technology. Four brands of hot sauces (16%) exceeded 0.1 ppm lead, the current FDA action level for lead in candy. Hot sauces with lead concentrations >0.1 ppm lead contained salt and were manufactured in Mexico. Subsequent analysis of additional lots of hot sauces exceeding 0.1 ppm lead revealed inconsistent lead concentrations between and within manufacturer lots. The lead concentrations of the plastic hot sauce lids ranged from below the limit of detection to 2,028 ppm lead. There was no association between lead concentrations in hot sauces and pepper type. These results indicate the need for more rigorous screening protocols for products imported from Mexico, the establishment of an applicable standard for hot sauce, and resources to allow for the enforcement of existing food safety policies. The data reported herein represent the first known investigation of lead concentrations in hot sauces.     

Polychlorinated biphenyls in vacuum dust and blood of residents in 20 Wisconsin households

Human exposure to PCBs is nearly universal in North America. While most exposure can be linked to consumption of contaminated fish, detection of PCBs in non-fish eating populations suggests that other routes of exposure including inhalation of PCB-laden particles or volatile congeners, ingestion of contaminated soil or dust, or dermal absorption following direct contact are also important. In an effort to assess the role of the residential environment as a source of exposure, vacuum dust was collected from the homes of 26 Wisconsin residents whose serum PCB levels had been measured approximately 2 years earlier. More than 60 congeners were detected in dust with all of the samples containing congeners 101, 110, 138 and 153. Total PCB levels ranged from 8.8 to 1186 ng g⁻¹ with levels being highest in vacuum dust from homes built between 1959 and 1970. Total PCB levels ranged from 0.05 to 8.34 μg L⁻¹ in serum collected from the adults living in these households, with congeners 138, 153 and 180 predominating. Hexa- and hepta-chlorinated biphenyls comprised 73% of the total residues detected in serum. However, most of the residues found in dust were lower chlorinated congeners with tetra- and penta-chlorinated biphenyls being dominant. Following log transformation, a positive association was found between serum and house dust PCB levels. This association was stronger among infrequent consumers of Great Lake fish, but of borderline statistical significance. This exploratory study suggests that house dust may be a significant source of exposure to PCBs and supports the need for further investigations.