PUF大气被动采样技术对POPs的采样计算

随着《斯德哥尔摩公约》的实施,大气中持久性有机污染物(POPs)的大气被动采样(PAS)观测技术得到了快速发展,相比于传统大气主动采样技术,PAS技术具有明显的优势。以应用最为广泛的聚氨酯软性泡沫材料大气被动采样(PUF-PAS)为例,重点阐述和讨论了3种通过大气被动采样技术来计算污染物在空气中的浓度的方法,并对其采样原理和发展趋势进行了简要介绍。     

Environmental Technology Verification (ETV) test of dioxin emission monitors

The performance of four dioxin emission monitors, including two long-term sampling devices, the Dioxin-MonitoringSystem (DMS) and AMESA (the adsorption method for sampling dioxins and furans), and two semireal-time continuous monitors, the resonance ionization with multimirror photon accumulation time-of-flight mass spectrometer (RIMMPA-TOFMS) and the jet resonance-enhanced multiphoton ionization (jet-REMPI) system were tested. A package boiler burning a simulated chlorinated hazardous waste was used for a total of nine tests. Reference samples were collected during each test and analyzed for polychlorinated dibenzodioxins and dibenzofurans (PCDDs/Fs) using gas chromatography mass spectrometry. The PCDD/F concentrations of the reference samples measured by EPA Method 23 ranged from 0.9 to 6.0 ng toxic equivalence (TEQ)/dry standard cubic meter. The relative accuracies achieved by DMS, AMESA, and jet-REMPI varied from 22.6% to 78.2%, with 100% data completeness. The RIMMPA-TOFMS produced no quantifiable results due to various difficulties associated with the instrument during the testing. The two long-term samplers were easy to install and operate and provided a cumulative, averaged emission for the sampling period. The operations of the two semi-real-time continuous monitors were relatively complex, but one of them provided on-site, real-time data for PCDD/F emissions from measurement of a TEQ correlative indicator compound. This article summarizes results from the individual Environmental Technology Verification reports for the four dioxin monitors. This work was presented, in part, at the Fourth International Conference on Combustion, Incineration/Pyrolysis and Emission Control (i-CIPEC)     

停留时间对滴滴涕农药热处理特性的影响研究

利用高温管式炉研究停留时间对滴滴涕农药热处理特性的影响。结果表明,600℃时ηDDT在15 min内迅速增长,在15 min后稳定在85%上下;900℃时,当停留时间≥15 min,ηDDT≥99%;1 200℃时,各时段的ηDDT≥99.9%。在滴滴涕农药残渣中,DDTs在600℃和900℃时的配比随停留时间的增加变化甚微,在1 200℃时,p,p’-DDD、DDT和o,p’-DDT分别占DDTs总量的比例随时间增加明显降低,p,p’-DDE则大幅增加。在尾气中,DDTs在600℃时的配比随停留时间的增加无明显变化,DDT为主要尾气残留物质,900℃时DDTs在尾气中配比变化混乱,1 200℃时,p,p’-DDE的比例随停留时间的增长迅速增加,并成为尾气中的主要DDTs残留物质。     

广东省新型POPs监测防控体系建设研究

2009年和2011年斯德哥尔摩公约新纳入的9种和1种持久性有机污染物（POPs）的研究是目前国际上环境领域研究的热点之一,所引起的环境污染和人体健康问题也逐步得到中国环保部门的关注.随着国际斯德哥尔摩公约履约活动的不断深入,中国正面临着履行公约以及削减与控制持久性有机污染物的巨大挑战.本文总结了广东省新型持久性有机污染物监测防控体系建设的必要性和意义,阐述了国内外在该领域的研究现状以及对解决新型POPs问题的作用.     

珠江口水环境中多溴联苯醚生态风险分析

以多溴联苯醚(PBDEs)作为研究对象,对珠江口水环境中多溴联苯醚进行了生态风险问题形成、生态风险分析及生态风险表征。研究结果表明,珠江口水环境中多溴联苯醚的生态风险主要来自五溴联苯醚,其在水相和沉积物相中的计算结果分别为0.000057和0.0073,目前珠江口水环境中多溴联苯醚的生态风险水平较低,暂无生态风险。     

Dynamic fate modeling of γ-hexachlorocyclohexane in the lower reaches of the Liao River

A QWASI model dependent on temperature is parameterized to describe the long-term fate of persistent organic pollutants (POPs) in the Liao River. The model parameters, namely fugacity capacity, degradation rate, and transfer coefficient, are profoundly affected by temperature. This model is used to simulate the fate of γ-hexachlorocyclohexane (γ-HCH) in the lower reaches of the Liao River from 1998 to 2008. Modeling results show that γ-HCH fugacity capacities in air, water, and sediment increase as temperature decreases, and the transfer and transformation rate coefficients increase as temperature increases. The variations of transfer and transformation parameter D values depend on fugacity capacities, and transfer and transformation coefficients simultaneously. The performance of the model is evaluated by comparing the predicted and observed concentrations in the water and sediment of the Liao River. The predicted values agree well with the observed value in the order of magnitude, in most cases within the factor of 3. It is believed that the model is appropriate for simulating the long term fate of POPs in the Liao River. Translated from Environmental Science, 2006, 27(1): 121–125 [译自: 环境科学]     

POPs废物处置技术多目标决策筛选研究

采用层次分析法对国际上较为成熟的9种POPs废物处置技术进行综合评价,筛选出适合我国的POPs废物处置技术. 从经济指标、环境指标和技术指标3个影响因素建立递阶层次结构模型,每个指标又细分为若干个子准则. 根据模型及评价指标体系设计专家咨询表,发放给POPs相关领域的专家打分. 采用matlab对评价结果进行数值分析,得到9种处置技术的总权重,其中分值最高的处置技术有:水泥窑共处置0.174 8,高温焚烧0.172 7;其次是安全填埋0.107 1,热解吸0.107 0,原位玻璃化0.103 0;最后是深井灌注0.086 9,超临界水氧化0.084 1,碱催化脱氯0.082 3,碱金属还原0.082 3.表明高温焚烧和水泥窑共处置是目前我国POPs废物处置技术的较佳之选.      

包埋类脂的吸附剂制备及吸附POPs性能

用丙酮作溶剂将三油酸甘油酯分散到醋酸纤维(CA)基体中,采用悬浮聚合的方法制备出了一种兼具亲水性,又能高倍富集持久性有机污染物的球形复合吸附剂。通过对分散剂的种类及其用量、悬浮介质的种类及其用量的研究,获得了球形复合吸附剂的最佳合成路线与工艺.球形吸附剂粒径为1～2mm。通过荧光分析和电镜扫描分析,表明三油酸甘油酯已被包埋到醋酸纤维基体中,并得到了均匀分散。采用七氯、狄氏剂、异狄氏剂、灭蚁灵为代表性的持久性有机污染物(POPs)。动力学吸附实验表明,当初始浓度为1μg/L时,在快速吸附阶段,溶液中80%的氯、狄氏剂、异狄氏剂可得到有效去除,但并没有达到吸附平衡。快速吸附完后,还在持续地进行慢速吸附。而对于灭蚁灵,吸附速度远远低于其他几种POPs。实验证明了吸附速度不仅与辛醇/水系数有关,而且还与有机污染物的分子结构有关。     

偏远地区大气中持久性有机污染物研究进展

持久性有机污染物(POPs)在偏远地区大气中的分布与迁移已经成为大气POPs研究的热点.基于被动采样技术的大尺度POPs监测网络已经应用于偏远地区大气POPs的研究之中.其研究成果显示,最近50～60年以来,大气中POPs浓度的最大峰值出现在80年代左右,而80年代之后大气中POPs的浓度日趋减小.这说明各国陆续禁用POPs之后,大气中POPs的浓度有显著降低的趋势.受温度和季节性使用的影响,大气POPs的浓度呈现明显的季节性变化特点:有机氯农药的浓度主要表现为夏季高而冬季低;多环芳烃的浓度则主要表现为冬季高而夏季低.基于POPs高挥发性和长距离大气传输的特点,POPs可以在全球范围内广泛分布,而高海拔地区由于气温较低,使其相对于低海拔地区成为了POPs的\"接收器\".大气POPs分布和迁移受温度、降水、气候事件的影响.而且POPs在大气与不同下垫面之间的界面交换的方向、速度和通量也主要受环境温度和POPs的挥发能力的制约.综合大气POPs迁移与气候因素、界面特点之间的关系建立了多介质、大尺度的大气POPs归趋模型.模型的建立和POPs来源的明确使大气POPs传输机制的研究逐渐深入.此外还讨论了目前大气POPs研究中存在着的一些亟待解决的问题,并提出该领域未来可能的发展趋势.