Polycyclic aromatic hydrocarbons in benthos of the northern Bering Sea Shelf and Chukchi Sea Shelf

Eighteen polycyclic aromatic hydrocarbons (PAHs) were detected in benthos collected onboard the ‘Snow Dragon’ in the Northern Bering Sea Shelf and Chukchi Sea Shelf during the 6^th Chinese National Arctic Research Expedition (CHINARE 2014). Σ₁₈PAHs for all biota samples ranged from 34.2 to 128.1 ng/g dry weight (dw), with the highest concentration observed in fish muscle (Boreogadus saida) samples close to St. Lawrence Island. The PAH composition pattern was dominated by the presence of lighter 3 ring (57%) and 2 ring (28%) PAHs, indicating oil-related or petrogenic sources as important origins of PAH contamination. Concentrations of alkyl-PAHs (1-methylnaphthalene and 2-methylnaphthalene) were lower than their parent PAH (naphthalene) in all biological tissue, and their percentage also decreased significantly (p<0.05) compared with those in the corresponding sediment. There were no significant relationships between PAH concentrations and trophic levels, which is possibly due to the combined results of the complex benthic foodweb in the subarctic/Arctic shelf region, as well as a low assimilation/effective metabolism for PAHs. According to toxic potency evaluation results from TCDD toxic equivalents (TEQs) and BaP-equivalent (BaPE) values, whelk (Neptunea heros) and starfish (Ctenodiscus crispatus) are two macroinvertebrate species showing relatively higher dioxin-like toxicity and carcinogenic risk.     

Ecotoxicity evaluation of Cu- and Fe-CNT complexes based on the activity of bacterial bioluminescence and seed germination

The toxic effects of the composites of Fe~0 and Cu~0 with different percentages of CNTs were examined based on the activity of bacterial bioluminescence and seed germination. In terms of the EC_50 values, the toxic effects of Cu~0 on bacterial bioluminescence and seed germination were approximately 2 and 180 times greater than that of Fe~0, respectively. The toxicity increased with increasing CNT content in the Cu-CNT mixtures for both organisms,whereas opposite results were observed with Fe-CNT mixtures. The mean toxic effects of Cu-CNT(6%) were approximately 1.3–1.4 times greater than that of Cu-CNT(0%), whereas the toxic effects of Fe-CNT(6%) were approximately 2.1–2.5 times lower than that of Fe-CNT(0%) for both the bioluminescence activity and seed germination. The causes of this phenomenon are unclear at this point. More research will be needed to elucidate the mechanism of the toxicity of nano-mixture materials and the causes of the different patterns of toxicity with Cu-and Fe-CNT mixtures.     

苯胺类化合物在不同pH值下对大型蚤的急性毒性及QSAR研究

测定了13种苯胺类化合物在不同pH下（6．0，7．8，9．0）对大型蚤（Daphnia magna)的24h半数活动抑制浓度24h-1C50，应用三种理化参数logP,TSA和pKa，对毒性数据进行了定量构效关系（QSARs)研究，并在此基础上初步探讨了苯胺类化合物的毒性机制。     

Characterisation of FOGs in grease trap waste from the processing of chickens in Thailand

Industrial firms that kill and process chickens generate wastewater that contains fat, oil, and grease (FOG). The FOGs are located in the fatty waste that is collected by floatation in grease traps. Chemical and physical characterisation of FOGs would provide useful information that would help in the development of methods designed to decrease the extent of pollution caused by disposal of the waste and to utilise commercially some of its lipid constituents. Employing these methods would enhance the profitability and competitive potential of these commercial organisations. Samples of grease trap waste from 14 firms in central Thailand have been examined. Due to the very different schemes of waste management employed by these firms, the physical appearance of their fatty wastes showed considerable variation. The chemical and physical properties of the FOGs present in these wastes showed considerable variation also. Large amounts of free fatty acids (10–70% as oleic acid) were detected in most of the 14 wastes and palmitic, cis-9-oleic, cis,cis-9,12-linoleic, stearic, and palmitoleic acids were the predominant species of free and esterified acids. Most of the FOGs were solid at temperatures below 40 °C. Many of them contained traces of heavy metals (Cu and Pb) and some contained traces of the pesticides dimethoate and cypermethrin. The content of these potentially hazardous substances would have to be considered very carefully before discarding the fatty wastes and during the development of methods designed to isolate their potentially profitable lipid constituents.     

Control of aliphatic halogenated DBP precursors with multiple drinking water treatment processes: Formation potential and integrated toxicity

The comprehensive control efficiency for the formation potentials(FPs) of a range of regulated and unregulated halogenated disinfection by-products(DBPs)(including carbonaceous DBPs(C-DBPs), nitrogenous DBPs(N-DBPs), and iodinated DBPs(I-DBPs)) with the multiple drinking water treatment processes, including pre-ozonation, conventional treatment(coagulation–sedimentation, pre-sand filtration), ozone-biological activated carbon(O_3-BAC) advanced treatment, and post-sand filtration, was investigated. The potential toxic risks of DBPs by combing their FPs and toxicity values were also evaluated.The results showed that the multiple drinking water treatment processes had superior performance in removing organic/inorganic precursors and reducing the formation of a range of halogenated DBPs. Therein, ozonation significantly removed bromide and iodide,and thus reduced the formation of brominated and iodinated DBPs. The removal of organic carbon and nitrogen precursors by the conventional treatment processes was substantially improved by O_3-BAC advanced treatment, and thus prevented the formation of chlorinated C-DBPs and N-DBPs. However, BAC filtration leads to the increased formation of brominated C-DBPs and N-DBPs due to the increase of bromide/DOC and bromide/DON.After the whole multiple treatment processes, the rank order for integrated toxic risk values caused by these halogenated DBPs was haloacetonitriles(HANs)》haloacetamides(HAMs) haloacetic acids(HAAs) trihalomethanes(THMs) halonitromethanes(HNMs) 》I-DBPs(I-HAMs and I-THMs). I-DBPs failed to cause high integrated toxic risk because of their very low FPs. The significant higher integrated toxic risk value caused by HANs than other halogenated DBPs cannot be ignored.     

城市居住区毒气扩散数值模拟

针对某居住区附近氯气储罐连续泄漏,通过求解三维不可压缩Navier-Stokes方程、K-ε湍流模型和物质浓度方程,模拟毒气在建筑物扰动条件下的扩散过程以及浓度时空分布特征,以毒气负载为基础给出近地面毒气危害区域,探讨毒气扩散对周边居民的影响。     

Applying the precautionary principle to consumer household cleaning product development

Hazardous chemicals are pervasive in household disinfectant products. Many ingredients have established associations with acute and chronic human health conditions as well as with environmental damage. Although these associations are suggested but not proven, they are of great concern. This article describes the application of the precautionary principle to the selection of an anti-microbial active ingredient for a botanical disinfectant when significant uncertainty exists around the hazard and risk of traditional disinfectant active ingredients. We show that application of the precautionary principle does not stifle innovation and facilitates a responsible approach to product development.     

Mitigation performance of the process protection system on the accident consequences of H2S-containing natural gas release and explosion

Toxic loads and explosion overpressure loads pose grave threats to the offshore oil and gas industry. Many safety measures are adopted to prevent and mitigate the adverse impacts caused by toxic loads and explosion overpressure loads. As a general safety barrier, the process protection system has been widely used but rarely evaluated. In order to assess the barrier ability, the mitigation performance of the process protection system is concerned in this study. Firstly, several chain accidents of H₂S-containing natural gas leakage and explosion are simulated by varying the response time of the process protection system with CFD code FLACS. Qualitative assessment is conducted based on the variation of the dangerous load profiles. Furthermore, the quantitative assessment of the mitigation performance is accomplished by considering its ability in reducing the probability of fatality. Emergency evacuation and no emergency evacuation are considered respectively in the quantitative assessment. The results prove that the process protection system takes effect on mitigating the toxic impact and explosion overpressure impact. The results also demonstrate that although the emergency evacuation may result in a severer explosion load to the operator, the process protection system can mitigate the adverse impacts regardless of whether the emergency evacuation is conducted or not.     

Recent application of Computational Fluid Dynamics (CFD) in process safety and loss prevention: A review

In recent years, significant progress has been made to ensure that process industries are among the safest workplaces in the world. However, with the increasing complexity of existing technologies and new problems brought about by emerging technologies, a strong need still exists to study the fundamentals of process safety and predict possible scenarios. This is attained by conducting the corresponding consequence modeling and risk assessments. As a result of the continuous advancement of Computational Fluid Dynamics (CFD) tools and exponentially increased computation capabilities along with better understandings of the underlying physics, CFD simulations have been applied widely in the areas of process safety and loss prevention to gain new insights, improve existing models, and assess new hazardous scenarios. In this review, 126 papers from 2010 to 2020 have been included in order to systematically categorize and summarize recent applications of CFD for fires, explosions, dispersions of flammable and toxic materials from accidental releases, incident investigations and reconstructions, and other areas of process safety. The advantages of CFD modeling are discussed and the future of CFD applications in this research area is outlined.     

Valuation of ecotoxicological impacts from tributyltin based on a quantitative environmental assessment framework

In the scientific literature, few valuations of biodiversity and ecosystem services following the impacts of toxicity are available, hampered by the lack of ecotoxicological documentation. Here, tributyltin is used to conduct a contingent valuation study as well as cost–benefit analysis (CBA) of measures for improving the environmental status in Swedish coastal waters of the Baltic Sea. Benefits considering different dimensions when assessing environmental status are highlighted and a quantitative environmental assessment framework based on available technology, ecological conditions, and economic valuation methodology is developed. Two scenarios are used in the valuation study: (a) achieving good environmental status by 2020 in accordance with EU legislation (USD 119 household⁻¹ year⁻¹) and (b) achieving visible improvements by 2100 due to natural degradation (USD 108 household⁻¹ year⁻¹) during 8 years. The later scenario was used to illustrate an application of the assessment framework. The CBA results indicate that both scenarios might generate a welfare improvement.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-015-0682-4) contains supplementary material, which is available to authorized users.