高强度钢纵梁内板的成形性分析

重点对高强度钢纵梁内板的成形性进行了分析,并且在详细分析零件几何特点的基础上,对此模型的圆角半径进行了修改,修改后零件的成形性得到了显著提高。     

高强铝合金超塑挤压成形

主要介绍了工业牌号高强铝合金在供应态或经简单预处理后在通用油压机上超塑成形的实例,并分析探讨了非理想组织材料超塑成形中微观组织的变化。     

用预先热处理的材料加工长杆高强度双头螺柱

用预先热处理的材料生产长杆高强度双头螺柱新工艺 ,消除了长杆的热处理变形 ,降低了机械性能的不稳定性 ,提高了产品质量及螺纹联接的可靠性。     

高强度高精度螺栓热后毛坯的矫直

利用搓丝原理 ,在自动搓丝机上 ,对热处理后的高强度螺栓毛坯进行矫直处理 ,提高了产品合格率和生产效率。     

高强度开发区域生态环境规划研究——以上海市宝山区生态环境规划为例

通过对区域生态环境-经济协调性现状的诊断,指出上海宝山区产业结构和空间布局的不合理是造成该区域环境污染严重的主要原因。规划从可持续发展的思路出发,形成合理的产业结构调整方案,利用环境功能区划引导区内产业结构和布局调整,构建面向高强度开发区域的生态环境指标体系,最终提出针对产业特点及环境现状的生态环境规划方案。     

高强度结构钢的天然和人工环境腐蚀开裂试验

俄罗斯列宁格勒“普罗米修斯”结构材料科学研究所在黑海深水的天然环境和实验室的模拟条件下,对高强度结构钢进行了对比试验,藉以探讨钢材在两种不同类型的试验条件下的腐蚀开裂性状,并通过对比试验,验证实验室人工试验的严酷程度黑海深水的天然环境条件的相关性。众所周知,黑海深水的特点是从150m～200m深处开始,就存在硫化氢污染问题。诚然,就绝对值而言,海水中的硫化氢含量是相当低的,在1000m以上的涂水中,也不过约为10mg/L左右。但是由于硫化氢对材料有腐蚀作用,故有必要对供在海水中使用的材料的耐抗腐蚀开裂的性状,进行试验和研…     

铬化物对人体的危害及预防

铬是一种银白色有光泽、坚硬而耐腐蚀的金属，熔点1860℃，沸点2482℃，比重6．92。铬及其化合物在现代工业上的应用广泛，如开采、冶炼铬矿．生产各种铬的化合物；用于制造坚韧优质合金钢及不锈钢、抗酸合金；纯铬用于电镀；铬酸铅、铬酸锌、铬酸钡等用于颜料、油漆布、橡胶、玻璃和陶瓷制造工业;     

Effect of a high strength chemical industry wastewater on microbial community dynamics and mesophilic methane generation

A high strength chemical industry wastewater was assessed for its impact on anaerobic microbial com- munity dynamics and consequently mesophilic methane generation. Cumulative methane production was 251 mL/g total chemical oxygen demand removed at standard temperature and pressure at the end of 30 days experimental period with a highest recorded methane percentage of 80.6% of total biogas volume. Volatile fatty acids （VFAs） analysis revealed that acetic acid was the major intermediate VFAs produced with propionic acid accumulating over the experimental period. Quantitative analysis of microbial communities in the test and control groups with quantitative real time polymerase chain reaction highlighted that in the test group, Eubacteria （96.3%） was dominant in comparison with methanogens （3.7%）. The latter were dominated by Methanomicrobiales and Methanobacteriales while in test groups increased over the experimental period, reaching a maximum on day 30. Denaturing gradient gel electrophoresis profile was performed, targeting the 16S rRNA gene of Eubacteria and Archaea, with the DNA samples extracted at 3 different time points from the test groups. A phylogenetic tree was constructed for the sequences using the neighborhood joining method. The analysis revealed that the presence of organisms resembling Syntrophomonadaceae could have contributed to increased production of acetic and propionic acid intermediates while decrease of organisms resembling Pelotomaculum sp. could have most likely contributed to accumulation of propionic acid. This study suggested that the degradation of organic components within the high strength industrial wastewater is closely linked with the activity of certain niche microbial communities within eubacteria and methanogens.