Performance assessment system of health,safety and environment based on experts' weights and fuzzy comprehensive evaluation

Performance evaluation of Health, Safety and Environment (HSE) is the measurement of a company's achievement in HSE management. In order to receive a comprehensive and objective evaluation result, it is necessary to consider all evaluation factors and experts at different levels when HSE performance assessment is conducted. To improve conventional HSE performance evaluation, where weighted average method was used, a Fuzzy Comprehensive Evaluation (FCE) method is used in this study by taking experts' weights into account. Further, an HSE operating performance assessment system is designed to simplify manual and complex assessment process and generate charts and analysis reports automatically. Finally, a case of petrochemical enterprise is used to illustrate the effectiveness of the method and system.     

A new leak location method based on leakage acoustic waves for oil and gas pipelines

In order to study a new leak detection and location method for oil and natural gas pipelines based on acoustic waves, the propagation model is established and modified. Firstly, the propagation law in theory is obtained by analyzing the damping impact factors which cause the attenuation. Then, the dominant-energy frequency bands of leakage acoustic waves are obtained through experiments by wavelet transform analysis. Thirdly, the actual propagation model is modified by the correction factor based on the dominant-energy frequency bands. Then a new leak detection and location method is proposed based on the propagation law which is validated by the experiments for oil pipelines. Finally, the conclusions and the method are applied to the gas pipelines in experiments. The results indicate: the modified propagation model can be established by the experimental method; the new leak location method is effective and can be applied to both oil and gas pipelines and it has advantages over the traditional location method based on the velocity and the time difference. Conclusions can be drawn that the new leak detection and location method can effectively and accurately detect and locate the leakages in oil and natural gas pipelines.     

Analysis of the Trend and Seasonal Cycle of Carbon Monoxide Concentrations in an Urban Area (4 pp)

Background, Aim and Scope Air quality is an field of major concern in large cities. This problem has led administrations to introduce plans and regulations to reduce pollutant emissions. The analysis of variations in the concentration of pollutants is useful when evaluating the effectiveness of these plans. However, such an analysis cannot be undertaken using standard statistical techniques, due to the fact that concentrations of atmospheric pollutants often exhibit a lack of normality and are autocorrelated. On the other hand, if long-term trends of any pollutant’s emissions are to be detected, meteorological effects must be removed from the time series analysed, due to their strong masking effects. Materials and Methods The application of statistical methods to analyse temporal variations is illustrated using monthly carbon monoxide (CO) concentrations observed at an urban site. The sampling site is located at a street intersection in central Valencia (Spain) with a high traffic density. Valencia is the third largest city in Spain. It is a typical Mediterranean city in terms of its urban structure and climatology. The sampling site started operation in January 1994 and monitored CO ground level concentrations until February 2002. Its geographic coordinates are W0°22′52″ N39°28′05″ and its altitude is 11 m. Two nonparametric trend tests are applied. One of these is robust against serial correlation with regards to the false rejection rate, when observations have a strong persistence or when the sample size per month is small. A nonparametric analysis of the homogeneity of trends between seasons is also discussed. A multiple linear regression model is used with the transformed data, including the effect of meteorological variables. The method of generalized least squares is applied to estimate the model parameters to take into account the serial dependence of the residuals of this model. This study also assesses temporal changes using the Kolmogorov-Zurbenko (KZ) filter. The KZ filter has been shown to be an effective way to remove the influence of meteorological conditions on O₃ and PM to examine underlying trends. Results The nonparametric tests indicate a decreasing, significant trend in the sampled site. The application of the linear model yields a significant decrease every twelve months of 15.8% for the average monthly CO concentration. The 95% confidence interval for the trend ranges from 13.9% to 17.7%. The seasonal cycle also provides significant results. There are no differences in trends throughout the months. The percentage of CO variance explained by the linear model is 90.3%. The KZ filter separates out long, short-term and seasonal variations in the CO series. The estimated, significant, long-term trend every year results in 10.3% with this method. The 95% confidence interval ranges from 8.8% to 11.9%. This approach explains 89.9% of the CO temporal variations. Discussion The differences between the linear model and KZ filter trend estimations are due to the fact that the KZ filter performs the analysis on the smoothed data rather than the original data. In the KZ filter trend estimation, the effect of meteorological conditions has been removed. The CO short-term componentis attributable to weather and short-term fluctuations in emissions. There is a significant seasonal cycle. This component is a result of changes in the traffic, the yearly meteorological cycle and the interactions between these two factors. There are peaks during the autumn and winter months, which have more traffic density in the sampled site. There is a minimum during the month of August, reflecting the very low level of vehicle emissions which is a direct consequence of the holiday period. Conclusions The significant, decreasing trend implies to a certain extent that the urban environment in the area is improving. This trend results from changes in overall emissions, pollutant transport, climate, policy and economics. It is also due to the effect of introducing reformulated gasoline. The additives enable vehicles to burn fuel with a higher air/fuel ratio, thereby lowering the emission of CO. The KZ filter has been the most effective method to separate the CO series components and to obtain an estimate of the long-term trend due to changes in emissions, removing the effect of meteorological conditions. Recommendations and Perspectives Air quality managers and policy-makers must understand the link between climate and pollutants to select optimal pollutant reduction strategies and avoid exceeding emission directives. This paper analyses eight years of ambient CO data at a site with a high traffic density, and provides results that are useful for decision-making. The assessment of long-term changes in air pollutants to evaluate reduction strategies has to be done while taking into account meteorological variability     

战略环境评价的工作程序

介绍了战略环境评价（法规、政策、计划和规划层次）工作程序的三个环节：评价方案的制定、评价实施和评价总结。并提出了战略环境评价指标体系制定的原则、战略环境评价的具体步骤及战略环境评价报告书的基本内容。     

战略环境评价及其应用初探

概述了战略环境价的概念、产生原因、研究现状及其工作程序，结合川南矿肥工程项目对它进行了应用初探，提出了计划、规划层次ＳＥＡ的方法和指标，并对我国环评工作提出了建议。     

The application of life cycle assessment to design

This paper explores the practical application of life cycle assessment (LCA) to product system development. While life cycle assessment methods have been studied and demonstrated extensively over the last two decades, their application to product design and development has not been critically addressed. Many organizational and operational factors limit the integration of the three LCA components (inventory analysis, impact assessment and improvement assessment) with product development. Design of the product system can be considered a synthesis of individual decisions and choices made by the design team, which ultimately shape the system's environmental profile. The environmental goal of life cycle design is to minimize the aggregate environmental impacts associated with the product system. Appropriate environmental information must be supplied to decision makers throughout each stage of the development process to achieve this goal. LCA can serve as a source of this information, but informational requirements can vary as the design moves from its conceptual phase, where many design choices are possible, to its detailed design and implementation. Streamlined approaches and other tools, such as design checklists, are essential. The practical use of this tool in product development also depends on the nature and complexity of the product system (e.g. new vs. established), the product development cycle (time-to-market constraints), availability of technical and financial resources, and the design approach (integrated vs. serial). These factors will influence the role and scope of LCA in product development. Effective communication and evaluation of environmental information and the integration of this information with cost, performance, cultural and legal criteria will also be critical to the success of design initiatives based on the life cycle framework. An overview of several of these design initiatives will be presented.     

铜川新区建设生态城市发展模式研究

以可持续发展为指导思想，结合生态城市的内涵，提出城乡一体化和生态生产的城市发展思路，建立了土地容量与人口适宜容量数学模型。根据铜川新区具有的自然优势，从自然—社会—经济复合生态角度，针对铜川新区的土地容量与人口适宜容量，探讨了将铜川新区建设成为一个环境优美、人口适宜的生态城市的发展模式。     

煤沥青烟气对大鼠肺损伤及免疫功能的影响

采用自然吸入的暴露方法，通过分析肺灌洗液成分及脾脏淋巴细胞的转化功能，观察碳素厂冷压车间空气对大鼠肺损伤及免疫功能的影响，结果表明，在自然吸入染毒期间，引起大鼠肺灌洗液中乳酸氢酶、酸性磷酸酶和唾液含量或高，肺巨噬细胞及其Ｆｃ受体数降低，并且还引起脾脏淋巴细胞的转化能力下降。     

Fisheries management: integrating societal preference, decision analysis, and ecological risk assessment

Fisheries management is the practice of analyzing and selecting options to maintain or alter the structure, dynamics, and interaction of habitat, aquatic biota, and man to achieve human goals and objectives. The theory of fisheries management is: managers or decision makers attempt to maximize renewable `output' from an aquatic resource by choosing from among a set of decision options and applying a set of actions that generate an array of outputs. Outputs may be defined as a tangible catch, a fishing experience, an existence value, or anything else produced or supported by renewable aquatic resources. Overall output is always a mix of tangible and intangible elements. However defined, management goals and objectives are essential components of fisheries management or any other field of renewable natural resource management. Reaching consensus on management goals and objectives has never been a simple task. Beyond the broad and often conflicting goals of an agency, managers must decide who should set specific management objectives — agency personnel, the public, or a combination of the two. Historically, rhetoric aside, fisheries managers in North America nearly always have consulted with professionals in governmental roles to set management objectives. In a strongly pluralistic society, this often resulted in protracted political and legal conflict. Increasingly, there are calls for use of risk assessment to help solve such ecological policy and management problems commonly encountered in fisheries management. The basic concepts of ecological risk assessment may be simple, but the jargon and details are not. Risk assessment (and similar analytical tools) is a concept that has evoked strong reactions whenever it has been used. In spite of the difficulties of defining problems and setting management objectives for complex ecological policy questions, use of risk assessment to help solve ecological problems is widely supported. Ecological risk assessment will be most useful (and objective) in political deliberations when the policy debate revolves around largely technical concerns. To the extent that risk assessment forces policy debate and disagreement toward fundamental differences rather than superficial ones, it will be useful in decision making.     

高邮市基本农田环境质量监测与评价

根据近两年高邮市试点工作经验，介绍基本农田分等定级的环境监测与评价方法，认为积极开展农田环境监测并进行科学评价是基本农田保护的重要工作内容。