A closer look at BLEVE overpressure

The overpressure produced by the boiling liquid expanding vapor explosion (BLEVE) is still not well understood. Various methods have been published on the overpressure modeling in the far field. They mostly differ by the modeling of the expansion energy, used to scale the distance to the source where the overpressure needs to be calculated. But these methods usually include a experimentally fitted reduction factor, and are mostly overestimating the overpressures. Today there is a growing interest in modeling the BLEVE overpressure in the near field, for studying the blast effect on critical infrastructure such as bridges and buildings. This requires a much better understanding of the BLEVE blast. This paper goes deeper in the understanding of the physical phenomenon leading to the BLEVE blast wave generation and propagation. First, mid-scale BLEVE experiments in addition to new experimental data for near field blast from a small scale supercritical BLEVE are analyzed. And second, an analysis method of the shocks observed in the experiments is presented based on fundamental gas dynamics, and allows the elaboration of a new modeling approach for BLEVE overpressure, based on the calculation of the initial overpressure and radius of the blast.     

A new leak location method based on leakage acoustic waves for oil and gas pipelines

In order to study a new leak detection and location method for oil and natural gas pipelines based on acoustic waves, the propagation model is established and modified. Firstly, the propagation law in theory is obtained by analyzing the damping impact factors which cause the attenuation. Then, the dominant-energy frequency bands of leakage acoustic waves are obtained through experiments by wavelet transform analysis. Thirdly, the actual propagation model is modified by the correction factor based on the dominant-energy frequency bands. Then a new leak detection and location method is proposed based on the propagation law which is validated by the experiments for oil pipelines. Finally, the conclusions and the method are applied to the gas pipelines in experiments. The results indicate: the modified propagation model can be established by the experimental method; the new leak location method is effective and can be applied to both oil and gas pipelines and it has advantages over the traditional location method based on the velocity and the time difference. Conclusions can be drawn that the new leak detection and location method can effectively and accurately detect and locate the leakages in oil and natural gas pipelines.     

Safety-related conclusions for the application of ultrasound in explosive atmospheres

International safety regulations such as EN 1127-1 consider ultrasound to be an ignition source. Currently, applications of ultrasound in explosive atmospheres have to comply with a threshold value of 1 mW/mm². However, it is unclear as to how this intensity has to be measured and, therefore, this threshold value is poorly defined. Moreover, it is based on theoretical estimations in analogy to other ignition sources and there are no publications or significant records on these estimations. Within a research project at PTB, it has now been investigated experimentally in relation to worst-case considerations including airborne ultrasound, focused MHz ultrasound in liquids and acoustic cavitation. On the basis of the results of the research it is now possible to revise the current regulations and to specify measures for safe operation of ultrasonic applications in explosive atmospheres. In this context, for ultrasound coupled directly to gaseous atmospheres a new threshold value of 170 dB (re. 20 μPa) can be suggested, and for ultrasonic applications in liquids, an augmentation can be made to the threshold to 400 mW/mm².     

青岛工业与资源灰色关联分析

本文应用灰色关联分析方法研究了青岛地区主导工业对资源的依赖状态及不同工业行业之产出对各类资源投入的反应程度,以灰关联树反映工业经济与资源复合系统之整体及不同层次子系统的耦合关系,定量揭示工业经济效益主导变量与各类资源变量的动态联系,从资源高效利用的角度探讨了青岛工业产业结构调整和优化的方向及区域经济与环境效益相协调的可能途径。     

Climate hazards: Lessons from recent events in the United States

Three recent cases of climate extremes are studied to identify human impacts and response strategies and to identify common characteristics that may help illuminate the nature of climate hazards. The 1980 heat wave in the central United States, 1981 cold wave in Boston, Massachusetts, and recent flooding and lake level rise in northern Utah, illustrate several important aspects of climate hazards that separate them from the more traditional set of catastrophic events (e.g. tornadoes, hurricanes and earthquakes) usually dealt with by hazards research and management. Among those characteristics are an emphasis on health impacts rather than physical damage, accumulative effects rather than short shocks, a tendency for impacts to accrue to certain socio-economic classes, and relatively slow onset. The management and research implications of these hazard characteristics are explored.     

布置压电阵列元件薄壁结构的振动控制技术研究

目的形成布置压电阵列元件薄壁结构的建模方法,通过时域仿真验证控制效果。方法通过有限元软件建立了布置压电阵列元件薄壁结构的动力学模型,采用ANSYS APDL参数化语言编写程序,自动生成带有压电阵列分流电路的薄壁结构有限元模型,并开展了动力学仿真研究。结果实现了连接分流电路的周期压电结构时域仿真,验证了压电阵列分流阻尼技术在薄壁结构振动控制中的有效性。结论所形成的布置压电阵列元件薄壁结构的建模和仿真方法,可为航空薄壁结构的振动控制提供技术支持。     

海洋油田水下集输-立管内两相流冲击力预测模型

目的分析两相流引起的冲击力与管道固有频率的流固耦合特性。方法针对海洋油田水下集输-立管系统内严重段塞流这一不稳定流动,通过构建气液两相流固耦合预测模型,分析管内段塞频率、管外涡街频率等流动特性与管道固有频率的关系,获取严重段塞流不同阶段对管道的冲击力特性。结果在水平方向上,管道所受冲击力最大部位为水平管与下倾管连接处,约为703.3 N;在垂直方向上,管道所受冲击力最大部位为下倾管底部与立管连接处,约为-993.5 N。管道所受冲击力与管内两相流引发的压力波动存在明显的一致性,在液塞喷发阶段,会引起整个管道冲击力的剧增。结论严重段塞流同一周期内,不同流动阶段所引发的管道振动特性不同,且不可忽视,在实际海管设计及使用过程中,需要结合管道运行工况对海管振动特性进行综合评估。     

区域产业结构转型升级水平与旅游扶贫效率耦合关系——以武陵山片区为例

以武陵山片区42个国家级贫困县（市、区）为案例地,综合运用SBM模型、改进的熵值法与耦合协调模型,揭示产业结构转型升级水平与旅游扶贫效率耦合协调关系的时空演化特征。结果表明:（1）武陵山片区整体及各分片区产业结构转型升级指数均呈波浪式变化,湖北片区、重庆片区以及武陵山片区整体的旅游扶贫效率呈上升态势,而湖南片区和贵州片区略有下降;（2）产业结构转型升级水平与旅游扶贫效率不耦合、不协调的县域单元主要集中在武陵山片区中部,数量逐年减少,实现耦合和协调的县域数量显著增加并向边缘地带形成集聚态势;（3）不耦合失调（类型1）向耦合协调（类型2）转变是核心转变路径,促使类型2的地区数量显著增多,并逐渐在研究区域边缘形成带状分布。研究可为集中连片特困地区产业结构优化升级和跨越贫困陷阱提供参考借鉴。     

A modular approach to Integrated Assessment modeling

In this paper, we present a new approach to model coupling that probably forms the methodological basis of a new generation of Integrated Assessment models. This approach respects the knowledge and expertise that is embodied in existing models and encourages their gradual evolution. Modularity is the guiding principle. Our approach is distinguished by the way modules are coupled which is based on an interplay of a job control module, a numerical coupling module, and a couple of stand-alone functional modules. The numerical coupling module - the core component - serves to treat the feedbacks between the functional modules. A first implemented example that couples an economic and a climate module by means of a two-phase meta-optimization is presented here. The algorithm and mathematical structure behind are discussed as well as important features such as convergence behavior and reliability.     

镉─邻菲啰啉配合物吸附波的研究与应用

在ｐＨ３．３的盐酸－醋酸钠介质中．镉－邻菲啉配合物在－０．６５Ｖ（ｖＳ．ＳＣＥ）处产生一灵敏的吸附波，其二次导数波高与镉浓度在０．０００６～０．１ｍｇ／Ｌ范围内呈良好的线性关系，检出下限达０．０００３ｍｇ／Ｌ。极谱波性质的研究表明该波具有配合物吸附波的特征。方法已用于环境水样中微量错的测定，结果与其它方法吻合。