冲模CAD系统中装配图消隐算法

介绍了几种实现模具装配图消隐的方法 ,分析了各种方法的缺陷。根据模具装配图中各零件之间的相互关系 ,对模具零件进行了分类 ,并提出了一种新的实现模具装配图消隐的方法图形实体重构法     

汽车组装流水线作业工人工效学调查研究

对汽车组装流水线作业工人的作业体位、人机测量、劳动状况和生产环境的调查结果表明，过分低头、向前弯腰、手抬高过肩、手抬高过头、长时间站立、工作时间率较高、工作场所照度不足以及噪声值超标可能是存在的主要工效学问题，是导致慢性肌肉骨骼损伤的重要因素，应根据有关标准和法规，采取相应的劳动保护和工效学改进措施     

抚顺石化公司硫磺回收装置的扩建和改造

抚顺石化分公司石油三厂原有硫磺回收装置的处理能力已经不能满足生产的需要,2002年对硫磺回收装置进行了扩建和改造。该装置采用了一段高温转化、二级催化转化的克劳斯工艺,采用揝SR敾乖?吸收工艺处理尾气。扩能改造后,新增的尾气处理能力与硫磺回收能力相配套,排放的废气符合国家现行的环保标准。该装置工艺路线合理、可靠,硫回收率高。     

基于BIM的装配式建筑并行施工作业空间冲突识别

为识别装配式建筑施工并行作业之间的空间冲突,分析装配式建筑施工项目现场各类作业空间占用需求,利用BIM技术模拟作业空间占用,引入混合轴向包围盒（AABB）与有向包围盒（OBB）算法,建立施工现场并行作业空间冲突检测模型。结果表明:所建立的模型可有效预测施工现场并行作业之间的空间冲突,为进一步的空间资源优化与项目安全管理提供支撑。     

Development of controlled release formulations of azadirachtin-A employing poly(ethylene glycol) based amphiphilic copolymers

Controlled release (CR) formulations of azadirachtin-A, a bioactive constituent derived from the seed of Azadirachta indica A. Juss (Meliaceae), have been prepared using commercially available polyvinyl chloride, polyethylene glycol (PEG) and laboratory synthesized poly ethylene glycol–based amphiphilic copolymers. Copolymers of polyethylene glycol and various dimethyl esters, which self assemble into nano micellar aggregates in aqueous media, have been synthesized. The kinetics of azadirachtin-A, release in water from the different formulations was studied. Release from the commercial polyethylene glycol (PEG) formulation was faster than the other CR formulations. The rate of release of encapsulated azadirachtin-A from nano micellar aggregates is reduced by increasing the molecular weight of PEG. The diffusion exponent (n value) of azadirachtin-A, in water ranged from 0.47 to 1.18 in the tested formulations. The release was diffusion controlled with a half release time (t_1/2) of 3.05 to 42.80 days in water from different matrices. The results suggest that depending upon the polymer matrix used, the application rate of azadirachtin-A can be optimized to achieve insect control at the desired level and period.     

电子封装行业职业有害因素的辨识与分析

从电子封装行业工艺入手,依据国家颁布的职业有害因素分类目录及职业有害因素致病模型,针对电子封装行业插入式(DIP)及表面贴装(QFP/SOIC)制造工艺使用的材料、设备、条件、人员作业特点,对行业内具有共性的职业有害因素进行分析,对工艺过程中存在的职业有害因素作出辨识,并提出把硅粉尘、铅、氩气、高温、环氧树脂、氢氧化钾、噪声、酸雾、重复性静态作业、重复性动态作业等有害因素作为防控重点,为电子封装行业职业有害因素的危害量化评价及其防控措施制定提供了科学依据。     

Surface modification of polypropylene non-woven fibers with TiO2 nanoparticles via layer-by-layer self assembly method: Preparation and photocatalytic activity

Polypropylene (PP) meltblown fibers were coated with titanium dioxide (TiO₂) nanoparticles using layer-by-layer (LbL) deposition technique. The fibers were first modified with 3 layers of poly(4-styrenesulfonic acid) (PSS) and poly(diallyl-dimethylammonium chloride) (PDADMAC) to improve the anchoring of the TiO₂ nanoparticle clusters. PDADMAC, which is positively charged, was then used as counter polyelectrolyte in tandem with anionic TiO₂ nanoparticles to construct TiO₂/PDADMAC bilayer in the LbL fashion. The number of deposited TiO₂/PDADMAC layers was varied from 1 to 7 bilayer, and could be used to adjust TiO₂ loading. The LbL technique showed higher TiO₂ loading efficiency than the impregnation approach. The modified fibers were tested for their photocatalytic activity against a model dye, Methylene Blue (MB). Results showed that the TiO₂ modified fibers exhibited excellent photocatalytic activity efficiency similar to that of TiO₂ powder dispersed in solution. The deposition of TiO₂ 3 bilayer on the PP substrate was sufficient to produce nanocomposite fibers that could bleach the MB solution in less than 4 hr. TiO₂-LbL constructions also preserved TiO₂ adhesion on substrate surface after 1 cycle of photocatalytic test. Successive photocatalytic test showed decline in MB reduction rate with loss of TiO₂ particles from the substrate outer surface. However, even in the third cycle, the TiO₂ modified fibers are still moderately effective as it could remove more than 95% of MB after 8 hr of treatment.     

大吨位预应力锚具组装件锚固性能足尺试验

广州西塔节点层系采用大直径体外预应力拉索直接对钢管柱施加楼层平面内方向的体外预应力.选取3根φ7×199的预应力锚具组装件进行了50次周期荷载试验及静载锚同性能足尺试验.采用两台YC-1350型液压千斤顶同步顶推箱梁对预应力试验索进行张拉,测定拉索的周期载荷性能、静载锚同性能、拉伸弹性模量以及极限拉力时的总应变和锚杯与锚板间相对位移,考核锚具拉伸时锚固情况、拉伸过程及卸载后锚具的变形情况.结果表明,经过50次循环加载后试验索均无断丝,破断荷载超过12151kN,其他各项指标也均符合要求,因而能保证广州西塔体外预应力设计的安全性.     

Determination of emergency assembly point for industrial accidents with AHP analysis

Major industrial accidents, which are a type of technological disaster, are very important due to the security risks and financial damages that threaten the environment and human health in today's industrialization. In this study, it was aimed to propose an approach that will guide the decision makers to choose the emergency assembly point that should be in the distance or shelter where the employees will be not affected by the negative consequences of emergencies within the scope of the obligation of industrial establishments preparing an internal emergency plan for major industrial accidents. For this purpose, in the first stage, modelling studies were carried out with ALOHA (Areal Locations of Hazardous Atmospheres) Software over possible accident scenarios in an industrial establishment containing different types and amounts of hazardous chemicals. As a result of modelling studies, possible toxic emissions, fire and explosion effect distances and threat zones for the industrial establishment were obtained. In the second stage, the weights of the main and sub-selection criteria to be used in determining the assembly point were calculated. This stage was carried out based on the comparison data obtained as a result of the questionnaire applied to professionals with the help of AHP (Analytic Hierarchy Process) method, which is one of the multi-criteria decision making methods. In the last stage, three candidate points were selected considering the physical effect areas determined in the first stage in the boundaries of the establishment, where the employees were evaluated to be affected the minimum from the negative consequences of industrial accidents. These candidate points were evaluated again with the AHP method on the basis of the sub-criteria whose relative weights were determined in the second stage and a selection was made. As a result, an approach that provides the solution of our problem was obtained.     

三维植被网预制草毯技术的意义和发展初探

三维植被网预制草毯就其独特的立体网包结构,预植草皮象卷地毯一样整体起运到需要绿化防护的地点,又象铺地毯一样铺贴在需防护的区域,从而达到快速绿化的目的.笔者就其技术的实用效果和发展趋势进行初步的探讨.表1,参3.