高烈度地震区隧道软硬围岩交接段刚柔并济抗减震技术研究*

为提高高烈度地震区隧道抗震性能，以某铁路隧道为研究背景，分析3种抗减震措施下隧道不同监测点隧道拱顶沉降、边墙收敛、衬砌结构PGA及最小安全系数，通过对比分析得到最优抗减震措施。结果表明:相比于工况1，工况2隧道拱顶沉降减小10.54%~81.10%，边墙收敛减小13.92%~78.77%，衬砌结构PGA减小31.42%~72.02%，最小安全系数增加18.04%~66.13%；相比于工况1，工况3结构拱顶沉降减小3.04%~18.02%，边墙收敛减小4.70%~32.00%，PGA增加13.95%~27.48%，最小安全系数增加7.49%~30.99%；工况4即“减震层+SFRC衬砌”刚柔并济法，相比于工况1，隧道拱顶沉降减小18.46%~83.98%，结构边墙收敛减小17.54%~85.47%，PGA减小30.00%~69.98%，最小安全系数增加47.95%~83.56%；4种工况抗减震性能由高到低依次为:工况4＞工况2＞工况3＞工况1。研究结果可为隧道软硬围岩交接段抗震设防提供理论参考。     

A proactive process risk assessment approach based on job hazard analysis and resilient engineering

Complex systems often experience a long period of incubation before accidents occur. Therefore, a proactive risk assessment is essential for process safety. The conventional job hazard analysis (JHA) method has been an effective tool to conduct a process risk assessment in the high-risk industrial field. However, the conventional JHA is inadequate for the proactive risk assessment since it is usually conducted during and before one specific operation process. Operations such as startup and maintenance are performed repeatedly on the lifecycle of a plant. Therefore, the risk reduction measures for the industrial process should include not only preventive actions obtained from the conventional JHA but also recovery ones. Resilience engineering (RE) has proven to be helpful for the recovery analysis of a complex system. The objective of this paper is to propose a proactive and comprehensive process risk assessment approach based on JHA and RE. The mechanism of applying RE to address operation process risk is illustrated. The integrated approach can provide guidelines to establish proactive risk reduction measures as well as maintain a low-risk level. Finally, a gas transmission startup process risk assessment case is presented to demonstrate its applicability.     

黑河中下游防风固沙功能时空变化及影响因子分析

黑河中下游是我国重要的防风固沙生态功能区,分析该区域的防风固沙功能时空变化,明确其主要的影响因子贡献,对于指导荒漠化防治、维护流域生态安全十分重要.该研究基于修正风蚀方程(revised wind erosion equation,RWEQ)、一元线性回归斜率分析、灰色关联分析和GIS技术,分析了2000—2017年黑河中下游防风固沙功能动态变化及其影响因子.结果表明:①2000—2017年,黑河中下游年均防风固沙量为3.2×109 t,年均防风固沙功能约为2.44×104 t/km2;防风固沙量总体呈增强趋势,年均增加6.67×107 t,年均变化率为1.85%.②区域防风固沙功能呈现中游较强,向下游递减的空间分布特征,防风固沙功能较高区约占研究区面积的31.54%,一般区占20.77%,较低区(北部荒漠区)占47.69%;甘肃省张掖市和嘉峪关市防风固沙功能呈增加趋势,回归方程系数(slope)为0~26.29%,占总面积的12.51%;额济纳旗东北部和甘肃省高台县中部防风固沙功能呈下降趋势,回归方程系数为-17.17%~0,占总面积的23.30%.③防风固沙功能主要影响因子中,风力因子最主要,贡献率为30.04%,其次为积雪覆盖、土壤湿度、植被覆盖,贡献率分别为24.57%、24.26%和21.13%.研究显示,防风固沙工程应综合考虑气候变化、植被覆盖、土壤特性及人类活动的复合影响,实行具有空间差异化的方案.      

Study of Meteorological Aspects and Urban Concentration of SO2 in Atmospheric Environment of La Plata, Argentina

This article presents and discusses SO₂ (ppbv) concentration measurements combined with meteorological data (mainly wind speed and direction) for a five-year campaign (1996 to 2000), in a site near an oil refinery plant close to the city of La Plata and surroundings (aprox. 740.000 inh.), considered one of the six most affected cities by air pollution in the country. Since there is no monitoring network in the area, the obtained results should be considered as medium term accumulated data that enables to determine trends by analyzing together gas concentrations and meteorological parameters. Preliminary characterization of the behaviour of the predominant winds of the region in relation with potential atmospheric gas pollutants from seasonal wind roses is possible to carry out from the data. These results are complemented with monthly averaged SO₂ measurements. In particular, for year 2000, pollutant roses were determined which enable predictions about contamination emission sources. As a general result we can state that there is a clear increase in annual SO₂ concentration and that the selected site should be considered as a key site for future survey monitoring network deployment. Annual SO₂ average concentration and prevailing seasonal winds determined in this work, together with the potential health impact of SO₂ reveals the need for a comprehensive and systematic study involving particulate matter an other basic pollutant gases.     

贵阳地区基本地质环境和主要岩土工程问题综述

本文系笔者对贵阳地区主要地质环境和工程地质特点进行的初步总结,内容为贵阳地区主要岩土构成情况、分布范围及与之相应的岩土工程地质特点和主要的岩土工程地质问题的描述,旨在给同行提供宏观性的了解和方向性的参考。     

地震安全性评价工作在城市建设中的重要作用

地震安全性评价工作在城市建设中起着非常重要的作用,为工程抗震提供精确的设计依据,提供科学合理的地震动参数,提出科学合理的设防要求,能够在一定程度上避免破坏性地震造成的损失,从而达到有效减灾的目的。     

A profile of environmental science in China

This paper concisely introduced the eco-environmental survey in China and the Chinese scientific programme for environmental research which is being practiced or being planned. China has established a nation-wide system relating to environmental scientific research and environmental administration and has taken the following strategies for solving the environment problems: (1) a series of laws and regulations for environmental protection has been promulgated so as to strengthen the legal administration and economic punishment. (2) the idea of ecological construction has been proposed for the purpose of taking the environmental protection work into the consideration of the national and provincial (or regional) economic construction planning. (3) spreading ecological engineering and ecological technologies have reduced the pollutant sources and have increased the industrial and agricultural economic profit.     

水蚀风蚀交错带小流域生态环境综合治理模式研究

水蚀风蚀交错带是黄土高原侵蚀最严重的地区和黄河下游河床粗泥沙的主要来源区，其生态环境脆弱、治理难度大，加之晋陕蒙能源基地的大规模开发，也带来了新的环境问题。鉴于治黄和煤田开发及生态环境整治的紧迫需要，以水蚀风蚀交错带六道沟小流域为试区，分析研究了该区水蚀风蚀时空分布规律及脆弱生态环境特征，提出以防治水蚀和风蚀为中心，以提高生态经济效益和持续发展为目标，以基本农田优化结构和高效利用及植被建设为重点，建立具有防蚀固沙兼高效生态经济功能的大农业复合生态系统综合治理模式，取得了良好的社会与经济效益。     

风能资源评估系统开发与应用

开发风能资源、利用风力发电在我国虽然只有数十年，但其发展却很快，风能作为可再生的清洁能源也越来越受到重视。风能资源评估作为风电资源开发的前提，是风力机选址的关键。介绍了以Visual Basic为开发工具，利用SQL Server为数据库开发而成的风能资源评估系统的结构和特点。经实践证明，本系统缩短了风能资源评价周期，提高了数据处理可靠性。     

A regional environmental management information system for Chinese EPA—the system analysis and design

REMIS is one of key research projects sponsored by the central government. It is recommended to regional EPAs as a main tool of the environmental management. REMIS simulates the functions of the regional EPAs and aimed to improve their management level. The national environmental management information system will base on REMIS.Functional analysis is the kernel of the REMIS system analysis. Data and data flow analysis are used to support the functional analysis.Investigations on the functions of the local EPAs of eight provinces and 12 cities have been taken. The functions were carefully sorted. Modular design method was used in system analysis and system design.The system analysis included functional analysis, data analysis and data flow analysis. The system design is based on the system analysis. HIPO diagram of each modular, data base structure, menu design, selection of hardware and software environment were the main items of the system design.