Study of specific energy and friction coefficient in minimum quantity lubrication grinding using oil-based nanolubricants

An investigation on minimum quantity lubrication (MQL) grinding was carried out with the scope of documenting the process efficiency of oil-based nanolubricants. The nanolubricants were composed of MoS₂ nanoparticles (<100 nm) over coated with organic agents, dispersed in two different base oils—mineral oil (paraffin) and vegetable oil (soybean). Surface grinding tests were carried out on cast iron and EN 24 steel under different lubrication conditions—MQL using nanolubricants (varying compositional chemistry and concentration of nanoparticles), pure base oils (without nanoparticles) and base oils containing MoS₂ microparticles (3–5 μm), and flood grinding using water-based coolant. Specific energy, friction coefficient in grinding and G-ratio were used as measurands for determining the process efficiency. Results show that MQL grinding with nanolubricants increases the process efficiency by reducing energy consumption, frictional losses at the wheel–workpiece interface and tool wear. The process efficiency is also found to increase with increasing nanoparticle concentration. Soybean and paraffin based-nanolubricant performed best for steel and cast iron, respectively, showing a possible functional relationship between the compositional chemistry of nanolubricant and the workpiece material, which will be the goal of future work.