首页 | 本学科首页   官方微博 | 高级检索  
     

城市道路生物滞留带溢流口设计方法探讨
引用本文:贺弋桓,王建龙,赵梦圆,席广朋. 城市道路生物滞留带溢流口设计方法探讨[J]. 环境工程, 2020, 38(6): 149. DOI: 10.13205/j.hjgc.202006024
作者姓名:贺弋桓  王建龙  赵梦圆  席广朋
作者单位:1. 北京建筑大学 北京市可持续城市排水系统构建与风险控制工程技术研究中心, 北京 100044;
基金项目:水体污染控制与治理科技重大专项
摘    要:随着生物滞留技术在海绵城市建设中的广泛应用,生物滞留带的优化设计已成为研究热点之一,其中溢流口的合理设计对生物滞留带的雨水径流控制效果和稳定运行具有重要意义。在实际工程应用中,由于缺少溢流口相关水力特性及设计计算方法的系统研究,往往直接把城市道路雨水口移至生物滞留带作为溢流口。然而生物滞留带溢流口与城市道路雨水口水力特征存在较大区别。针对上述问题,通过对生物滞留带溢流口水力特性的分析,计算了常见溢流口的过流能力,并举例对其工程应用选型及设计方法进行了分析,以期为生物滞留带溢流口的优化设计提供依据。

关 键 词:生物滞留带   溢流口   海绵城市   过流能力
收稿时间:2020-03-14

DISCUSSION ON DESIGN METHOD OF BIORETENTION OVERFLOW OUTLET ALONG THE URBAN ROADS
HE Yi-huan,WANG Jian-long,ZHAO Meng-yuan,XI Guang-peng. DISCUSSION ON DESIGN METHOD OF BIORETENTION OVERFLOW OUTLET ALONG THE URBAN ROADS[J]. Environmental Engineering, 2020, 38(6): 149. DOI: 10.13205/j.hjgc.202006024
Authors:HE Yi-huan  WANG Jian-long  ZHAO Meng-yuan  XI Guang-peng
Affiliation:1. Beijing Engineering Research Center of Sustainable Urban Sewage System Construction and Risk Control, Beijing University of Civil Engineering and Architecture, Beijing 100044, China;2. Beijing Advanced Innovation Center for Future Urban Design, Beijing University of Civil Engineering and Architecture, Beijing 100044, China;3. Beijng General Municipal Engineering Design & Research Institute Co., Ltd, Beijing 100082, China
Abstract:With the widespread application of bioretention in the construction of sponge city in China, the optimal design of bioretention was paid more and more attention. However, due to the absence of systematically research on hydraulic characteristics analysis and design methods, the design method of urban road grate inlet was often directly adopt in overflow outlet design in the bioretention. However, there was a great difference between the hydraulic characteristics of overflow outlet in bioretention and traditional grate inlet on the road. For the above problems, the hydraulic characteristics of the overflow outlet in the bioretention was analyzed via theoretical methods, and the drainage capacity of which was discussed. The design method of overflow outlet in bioretention was analyzed with an example, so as to provide references for the optimal design of the bioretention overflow outlet.
Keywords:
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《环境工程》浏览原始摘要信息
点击此处可从《环境工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号