Aufkommen und Verteilung von Feststoffen in Kanalsystemen

Suspendend solids (SS) are important parameters in the assessment of potential effects of emissions out of sewer systems. This is due to the fact that many pollutants are transported with particles in the sewer systems and therefore are emitted into receiving waters. In this paper, significant emissions in commonly applied sewer systems (combined sewer system CSS], separate sewer system SSS]) are mentioned, and typical concentration ranges of SS are listed. Furthermore, data from selected pollutants (lead, polycyclic aromatic hydrocarbons PAH]) are collected and concentration ranges in typical flow types of the sewer systems are calculated. In the second part of the paper results from pollution load simulations are introduced. The calculations are based on assumptions from literature and were conducted in a hypothetical catchment. Main interest was the comparison of emissions out of SSS and CSS, shown for selected parameters SS, lead and PAH. Results of the pollution load simulation show that emissions for surface runoff related compounds like lead are extremely high in the SSS in comparison to the CSS. This is mainly reasoned by the high elimination rate in the waste water treatment plant (WWTP). In summary, a general answer, which sewer system emits higher pollution loads is not possible. It is extremely dependent on the considered substance and its specific properties and resulting behaviour in the sewer systems. For a first estimation, new classes of substances are distinguished considering their origin (surface runoff versus dry weather flow) and their elimination capacity in the WWTP.