| 热固性树脂对芳纶复合材制防弹性能的影响 |
| |
| 引用本文： | 吴中伟,吕攀珂,高沛,方心灵,刘元坤,赵耀.热固性树脂对芳纶复合材制防弹性能的影响[J].中国个体防护装备,2012(1):18-20. |
| |
| 作者姓名： | 吴中伟 吕攀珂 高沛 方心灵 刘元坤 赵耀 |
| |
| 作者单位： | 1. 北京航天实验技术研究所,北京100074／北京雷特新技术实业公司,北京100074
2. 北京雷特新技术实业公司,北京,100074 |
| |
| 摘 要： | 采用环氧树脂对酚醛树脂进行改性，树脂的粘结强度明显提高，当环氧树脂含量保持在6％时，防弹复合板的防弹性能最优，复合板的安全裕度更高。而当树脂固含量在15％-25％，复合板的最大粘结力为37．8-40．1N，其中，当树脂固含量为20％时，防弹复合板的防弹性能最优。同时研究了增塑剂对复合板防弹性能的影响，结果显示，当增塑剂含量为15％时，防弹复合板的防弹性能最优。
|
| 关 键 词： | 热固性树脂 芳纶 防弹性能 复合材料 |
Ballistic Performance of Thermosetting Resin on Aramid Composite Materials |
| |
| Wu Zhongwei,Lu Panke,Gao Pei,Fang Xinling,Liu Yuankun,Zhao Yao.Ballistic Performance of Thermosetting Resin on Aramid Composite Materials[J].China Personal Protective Equipment,2012(1):18-20. |
| |
| Authors: | Wu Zhongwei Lu Panke Gao Pei Fang Xinling Liu Yuankun Zhao Yao |
| |
| Institution: | 1 Beijing Institute of Aerospace Testing Technology, Beijing, 100074; 2 Beijing Rate New Technology Corporation, Beijing, 100074) |
| |
| Abstract: | The modification of phenolic with epoxy resin was carried out, the resin bond strength significantly improved. When the content of epoxy resin was 6%, the bulletproof of composite board was the best. While the solid content of the resin was 15%-25%, the maximum bond strength of the composite board was 37.8N-40.1N, and the optimal was 20%. And also study the influence of plasticizer. The experimental results showed that when the content of plasticizer was 15%, the bulletproof of composite board was the best. |
| |
| Keywords: | thermosetting resin aramid ballistic performance composite materials |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
