Rapid degradation of carbon tetrachloride by commercial micro-scale zinc powder assisted by citric acid

We developed an effective method for degradation of carbon tetrachloride (CT) in contaminated water. Zinc metal as a reducing agent for CT in aqueous solutions has been previously studied in some detail, but the rapid corrosion of zinc surface usually reduces its efficiency in removing CT. We assumed that citric acid could enhance the degradation of CT by zinc powder due to the elimination of a passivation layer of Zn(II) (hydr)oxides on the surface of zinc powder through chelating of organic ligands with Zn(II) produced from the reaction and keeping the exposure of active sites to targets. Here the influence of citric acid on the decomposing of CT by commercial micro-scale zinc powder was investigated in a pH range of 3.5–7.5 at 25°C in batch experiments. Reaction mixtures were analysed by gas chromatography/headspace analysis, and Cl⁻ concentration was determined by turbidimetry. The results demonstrate that the degradation of CT by zinc metal alone is very weak, but the addition of citric acid can assist zinc powder to decompose CT more completely and rapidly at all pHs. Degradation of CT took place mainly in the first 10 min of reaction, coupled with 75–95% of CT removal. Maximum dechlorination percentage (82.4%) of CT was obtained at pH 5.5. In that case, chloroform and dichloromethane, as main intermediates, were found at low levels during the whole reaction, suggesting that CT may be sequentially and multiply degraded so quickly that methane is yielded before the intermediates can be desorbed and released to aqueous solution. When compared with the current methods of nano-scale zinc and bimetallic systems, the application of commercial micro-scale zinc particles assisted by organic ligands is of environmental significance since it allows decontamination of aqueous chlorinated organic compounds at low cost and with high efficiency.