Modelling aerosol number distributions from a vehicle exhaust with an aerosol CFD model |
| |
| Authors: | B Albriet KN Sartelet S Lacour B Carissimo C Seigneur |
| |
| Institution: | 1. Aerosol Physics Laboratory, Physics Unit, Faculty of Engineering and Natural Sciences, Tampere University, Tampere, Finland;2. Atmospheric Composition Research, Finnish Meteorological Institute, Helsinki, Finland;3. Laboratory of Applied Thermodynamics, Aristotle University of Thessaloniki, Thessaloniki, Greece;1. Centre for Green Technology, School of Civil and Environmental Engineering, University of Technology Sydney, NSW, 2007, Australia;2. Jockey Club Heavy Vehicle Emissions Testing and Research Centre, Vocational Training Council, Hong Kong, China;3. Environmental Protection Department, Hong Kong Special Administrative Region Government, Hong Kong, China;4. Department of Mechanical Engineering, The University of Hong Kong, Hong Kong, China;5. Faculty of Science and Technology, Technological and Higher Education Institute of Hong Kong, Hong Kong, China;1. Meteorology and Air Quality Section, Wageningen University, The Netherlands;2. Institute for Marine and Atmospheric Research Utrecht, Utrecht University, The Netherlands |
| |
| Abstract: | Vehicular traffic contributes significantly to the aerosol number concentrations at the local scale by emitting primary soot particles and forming secondary nucleated nanoparticles. Because of their potential health effects, more attention is paid to the traffic induced aerosol number distributions.The aim of this work is to explain the phenomenology leading to the formation and the evolution of the aerosol number distributions in the vicinity of a vehicle exhaust using numerical modelling. The emissions are representative of those of a light-duty diesel truck without a diesel particle filter. The atmospheric flow is modelled with a computational fluid dynamics (CFD) code to describe the dispersion of pollutants at the local scale. The CFD code, coupled to a modal aerosol model (MAM) describing the aerosol dynamics, is used to model the tailpipe plume of a vehicle with emissions corresponding to urban driving conditions. On the basis of available measurements in Schauer et al. (1999), three surrogate species are chosen to treat the semi-volatile organic compounds in the emissions.The model simulates the formation of the aerosol distribution in the exhaust plume of a vehicle as follows. After emission to the atmosphere, particles are formed by nucleation of sulphuric acid and water vapour depending strongly on the thermodynamic state of the atmosphere and on the dilution conditions. The semi-volatile organic compounds are critical for the rapid growth of nanoparticles through condensation. The semi-volatile organic compounds are also important for the evolution of primary soot particles and can contribute substantially to their chemical composition.The most influential parameters for particle formation are the sulphur fuel content, the semi-volatile organic emissions and also the mass and initial diameter of the soot particles emitted. The model is able to take into account the complex competition between nucleation, condensation and dilution, as well as the interactions among the different aerosol modes. This type of model is a useful tool to better understand the dynamics leading to the formation of traffic induced aerosol distributions. However, some key issues such as the turbulence in the exhaust plume and in the wake of the car, the magnitude and chemical composition of semi-volatile organic emissions and the possible nucleation of organic species need to be investigated further to improve our understanding of ultrafine particle formation. |
| |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
