| Abstract: | Irrigated agriculture is a major sector of agricultural economy where high value crops are grown with substantial input of fertilizers and pesticides. High concentrations of nitrate and pesticides have been observed in ground water beneath irrigated areas in humid regions, where irrigation is practiced on sandy soils that have low water-holding capacity. Data from these areas indicate that irrigation wells are typically screened in the bottom part of the aquifer (which contain coarser deposits) whereas the domestic wells are screened just below the water table. Monitoring results from several irrigated areas have shown the stratification of dissolved inorganic and organic chemicals in the aquifer. Nitrate in such systems is typically highest near the surface. This has serious health implications for the rural population that relies upon shallow ground water for drinking. Current environmental policy towards pollution reduction focuses on improved management practices to reduce the loading of the chemicals to ground water. However, an engineering issue, dealing with the design of the irrigation and domestic wells has not been addressed. A design modification for the irrigation and domestic wells can reduce the risk of high nitrate ground water being pumped by domestic wells. A proposal to convert a deep vertical irrigation well to a series of small-capacity shallow vertical wells or a large-capacity horizontal well and slight deepening of the domestic wells was examined through simulations. This can reduce the nitrate concentration of ground water in domestic wells dramatically and use the high nitrate water for crop irrigation. |
