| 基于ARM的非接触式IC卡控制器设计 |
| |
| 引用本文： | 房向荣.基于ARM的非接触式IC卡控制器设计[J].内蒙古环境科学,2009(3). |
| |
| 作者姓名： | 房向荣 |
| |
| 作者单位： | 西安邮电学院电子与信息工程系 |
| |
| 基金项目： | 西安邮电学院院教字101-1435号 |
| |
| 摘 要： | 介绍了非接触式读卡模块ZLG500A数据传输时序和传输协议,并采用ARM微处理器LPC2103的GPIO方式,根据ZLG500A的数据传输规范模拟相应的SPI时序,设计非接触式IC卡控制器软硬件系统,完成了非接触式IC卡数据的读写,在此基础上开发出非接触式IC卡门禁应用系统,系统实际运行效果良好.
|
| 关 键 词： | 非接触式IC卡 数据传输协议 模拟SPI时序 ARM微处理器 |
Design of Contactless IC Card Control System Based on ARM |
| |
| FANG Xiang-rong.Design of Contactless IC Card Control System Based on ARM[J].Inner Mongolia Environmental Protection,2009(3). |
| |
| Authors: | FANG Xiang-rong |
| |
| Institution: | FANG Xiang-rong (Dept.of Electronics and Information Engineering; Xi an Institute of Posts and Telecommunication; Xi an 710121; China); |
| |
| Abstract: | This article introduced the contactless card reader module ZLG500A data transfer timing and protocol,and using the ARM microprocessor LPC2103 by it s GPIO mode,simulate SPI timing sequence in accordance with ZLG500A data transmission corresponding,design of contactless IC card controller soft-hardware systems,completed a contactless IC card data read and write.The development of non-contact IC card access control system based on this,the system running well. |
| |
| Keywords: | the contactless card data transfer protocol timing sequence simulation ARM microprocessor |
| 本文献已被 维普 等数据库收录！ |
