| Abstract: | A new laboratory test system for electron beam ionization in electrostatic precipitator geometries has been constructed to measure ion current density as a function of voltage difference for clean plate (no dust contamination) conditions. The new system incorporates improved electrodes which withstand an applied voltage of ± 55 kV, a factor of 5 increase over the previous test system. A 3 MeV Van de Graaff accelerator produced ionizing electron beams of 1.2 and 2 MeV energy with beam currents of 10.5 and 21 μA in place of corona wire ionization. Ion current densities of up to 130 mA/m2 were measured before breakdown between the plates, and no ion current saturation was observed. A comparison of I-V curves and sparkover voltages for various beam energies, currents, and types of collimation is discussed and the need for measurements with good beam geometry is addressed. |
