| 稠油废水COD处理工艺研究 |
| |
| 引用本文： | 黄军荣,陈进富,吴芳云.稠油废水COD处理工艺研究[J].油气田环境保护,2001,11(3):30-33. |
| |
| 作者姓名： | 黄军荣 陈进富 吴芳云 |
| |
| 作者单位： | 石油大学环境中心 |
| |
| 摘 要： | 通过对多种絮凝剂的试验研究,筛选出UP-11混凝剂,在其投加量为2.4 mL/L时,油与COD去除效果最佳。同时在此基础上采用膜SBR法对絮凝出水做进一步处理,当运行条件为:进水0.5h、曝气4h、沉淀1h、排水0.5h时,出水完全达到国家规定的污水排放标准。
|
| 关 键 词： | 采油 稠油污水 絮凝剂 污水处理 达标排放 |
| 修稿时间： | 2001年5月10日 |
Study on COD Disposal Process of Heavy Oil Waste Water |
| |
| Huang Junrong,Cheng Jinfu,Wu Fangyun.Study on COD Disposal Process of Heavy Oil Waste Water[J].Environmental Protection of Oil & Gas Fields,2001,11(3):30-33. |
| |
| Authors: | Huang Junrong Cheng Jinfu Wu Fangyun |
| |
| Abstract: | Based on experimental research on various flocculants, UP-11 combined flocculant is screened. With an addition rate of 2.4 mL/L, the optimal oil and COD removing efficiency is obtained. Then, flocculation effluent is treated further by membrane SBR method. Under the condition of water inlet of 0.5h, exposed to air of 4h, precipitation of 1h and water outlet of 0.5h, the effluent will completely meet the waste water pollution standard issued by the government. |
| |
| Keywords: | oil production heavy oil waste water flocculant waste water disposal discharge after meeting standard |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
