PHB/V in Extrusion Coating of Paper and Paperboard: Part I: Study of Functional Properties

Extrusion-coating experiments were carried out in the pilot line at Tampere Univesity of Technology (Institute of Paper Converting). Typical paper and paperboard substrates were coated with commercially produced 3-hydroxybutyrate/3-hydroxyvalerate. The resulting physical properties of extrusion-coated composite structures were studied. Adhesion between PHB/V and a fiber-based substrate was rather poor, regardless of typically used pretreatments (corona and flame). On the other hand, adhesion was sufficient (mode of failure was fiber tear as the materials were separated) when the substrate was primed with an acrylic-based primer. The surface energy and polarity of PHB/V were much higher than the respective ones of LDPE. Curling of PHB/V was reduced by the addition of wax or tall oil rosin into the base polymer.