首页 | 本学科首页   官方微博 | 高级检索  
     


Numerical modeling and performance evaluation of passive convergence-permeable reactive barrier (PC-PRB)
Authors:Kaixuan Zheng  Dong Xie  Yiqi Tan  Zhenjiang Zhuo  Tan Chen  Hongtao Wang  Ying Yuan  Junlong Huang  Tianwei Sun  Fangming Xu  Yuecen Dong  Ximing Liang
Affiliation:1. School of Environment, Tsinghua University, Beijing 100084, China2. College of Life and Environmental Sciences, Minzu University of China, Beijing 100081, China3. State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012, China
Abstract: ● A 2D finite-element solute transport model, PRB-Trans, is developed. ● PC-PRB can significantly improve the remediation efficiency of PRB. ● PC-PRB can considerably reduce the required PRB dimensions and materials costs. ● The required PRB length decreases with the increase of pipe length, L p. The passive convergence-permeable reactive barrier (PC-PRB) was proposed to address the limitations of traditional PRB configurations. To evaluate the hydraulic and pollutant removal performance of the PC-PRB system, we developed a simulation code named PRB-Trans. This code uses the two-dimensional (2D) finite element method to simulate groundwater flow and solute transport. Case studies demonstrate that PC-PRB technology is more efficient and cost-effective than continuous permeable reactive barrier (C-PRB) in treating the same contaminated plume. Implementation of PC-PRB technology results in a 33.3% and 72.7% reduction in PRB length (LPRB) and height (HPRB), respectively, while increasing 2D horizontal and 2D vertical pollutant treatment efficiencies of PRB by 87.8% and 266.8%, respectively. In addition, the PC-PRB technology has the ability to homogenize the pollutant concentration and pollutant flux through the PRB system, which can mitigate the problems arising from uneven distribution of pollutants in the C-PRB to some extent. The LPRB required for PC-PRB decreases as the water pipe length (Lp) increases, while the HPRB required initially decreases and then increases with increasing Lp. The effect of passive well height (Hw) on HPRB is not as significant as that of Lp on HPRB. Overall, PC-PRB presents a promising and advantageous PRB configuration in the effective treatment of various types of contaminated plumes.
Keywords:Passive convergence-permeable reactive barrier  Numerical modeling  Hydraulic behavior assessment  Pollutant treatment performance evaluation  Influential factors analysis  
点击此处可从《Frontiers of Environmental Science & Engineering》浏览原始摘要信息
点击此处可从《Frontiers of Environmental Science & Engineering》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号