Direct simulation of heterogeneous diffusion and inversion procedure applied to an out-diffusion experiment. Test case of Palmottu granite

An out-diffusion laboratory experiment using a non-reactive tracer was fitted using the Time Domain Diffusion (TDD) method. This rapid particle tracking method allows simulation of the heterogeneous diffusion based on pore-scale images and local values of diffusivities. The superimposed porosity and mineral 2D maps act as computation grids to condition diffusion pathways. We focused on a Palmottu granite sample, in which the connected pore space has a composite microstructure with cracks linking microporous minerals and is above the percolation threshold. Three main results were achieved: (i) When compared to the fitting obtained with one coefficient (best mean square residual R = 1.6 x 10(-2)), diffusion is shown to be suitably characterised with two coefficients related to cracks and microporous minerals (best R = 6.5 x 10(-4)), (ii) rather than imposing a local apparent diffusion coefficient D(a) independent of the local porosity Phi, a best fit is obtained by applying Archie's relationship D(a) = D(0) x G with G = Phi(m) to each pixel of the calculation grids (G is the geometry factor, D(0) is the diffusion coefficient in free fluid, and m is Archie's exponent), and (iii) the order of magnitude of the fitted diffusion coefficient or Archie's exponents (m=0 for microcracks and m=1.82 for microporous minerals) is physically realistic.