首页 | 本学科首页   官方微博 | 高级检索  
     

化妆品生产废水处理工程设计与调试实例
引用本文:王炜,汪晓军,周相武. 化妆品生产废水处理工程设计与调试实例[J]. 环境工程, 2007, 25(1): 21-23. DOI: 10.13205/j.hjgc.200701006
作者姓名:王炜  汪晓军  周相武
作者单位:华南理工大学环境科学与工程学院,广州,510640;华南理工大学环境科学与工程学院,广州,510640;华南理工大学环境科学与工程学院,广州,510640
摘    要:采用“水解酸化-接触氧化”组合工艺处理高浓度日用化工废水,同时以曝气生物滤池工艺进行深度处理,进一步提高废水处理效率。经过系统处理,废水CODCr从进水4000mg/L左右降为80mg/L以下,BOD5从进水1100mg/L左右降为20mg/L以下,处理效率均达到98%,排放水质完全达到广州市污水排放一级标准(DB4437-90)。通过工程的长期实际运行表明,该系统处理的出水水质稳定,处理效率高。

关 键 词:日用化工  废水处理  水解酸化  生物接触氧化  曝气生物滤池
修稿时间:2006-04-11

DESIGN AND COMMISSIONING OF COSMETIC WASTEWATER TREATMENT SYSTEM
Wang Wei,Wang Xiaojun,Zhou Xiangwu. DESIGN AND COMMISSIONING OF COSMETIC WASTEWATER TREATMENT SYSTEM[J]. Environmental Engineering, 2007, 25(1): 21-23. DOI: 10.13205/j.hjgc.200701006
Authors:Wang Wei  Wang Xiaojun  Zhou Xiangwu
Affiliation:Wang Wei Wang Xiaojun Zhou Xiangwu
Abstract:The high concentration cosmetic wastewater can be treated by means of hydrolytic acidification-biological contacting oxidation system,and biological aerated filter (BAF) for advanced treatment,so that the removal rate can be improved.Through the operation of this project,the COD_ Cr of effluent can fall below 80 mg/L from about 4 000 mg/L of influent,and BOD_5 of effluent can fall below 20 mg/L from about 1 100 mg/L of influent,and also the removal rate can both reach 98%.Quality of effluent is up to the integrated wastewater discharge standard of Guangzhou (GB4437-90).It is indicated by the plant operation of this project for a long time that this process has a high efficiency of treatment with a stable water quality of the effluent.
Keywords:consmetic   wastewater treatment   hydrolytic acidification   biological contactingoxidation and biological aerated filter
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《环境工程》浏览原始摘要信息
点击此处可从《环境工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号