| 玻璃钢切边打磨纤维粉尘收集净化 |
| |
| 引用本文： | 楚凯锋,魏先勋,翟云波,刘剑伟,黄斌.玻璃钢切边打磨纤维粉尘收集净化[J].环境科学与技术,2005,28(2):74-75. |
| |
| 作者姓名： | 楚凯锋 魏先勋 翟云波 刘剑伟 黄斌 |
| |
| 作者单位： | 湖南大学环境科学与工程系,长沙,410082;湖南大学环境科学与工程系,长沙,410082;湖南大学环境科学与工程系,长沙,410082;湖南大学环境科学与工程系,长沙,410082;湖南大学环境科学与工程系,长沙,410082 |
| |
| 摘 要： | 根据玻璃钢切边打磨的工艺状况以及手工加工产生的纤维粉尘的特点,采用冲击、过滤、喷淋三级一体化净化装置净化含尘气流,取得良好的净化效果。浅述了净化系统的集气设备、净化原理、工艺流程和排风量计算等工程设计问题。
|
| 关 键 词： | 纤维粉尘 净化系统 工程设计 |
| 文章编号： | 1003-6504(2005)02-0074-02 |
| 修稿时间： | 2004年2月20日 |
Collection and Cleaning of Fibre Dust in Polishing and Edges Cutting of FRP |
| |
| Chu Kai-feng,Wei Xian-xun,ZHAI Yun-bo,LIU Jian-wei,HUANG Bin.Collection and Cleaning of Fibre Dust in Polishing and Edges Cutting of FRP[J].Environmental Science and Technology,2005,28(2):74-75. |
| |
| Authors: | Chu Kai-feng Wei Xian-xun ZHAI Yun-bo LIU Jian-wei HUANG Bin |
| |
| Abstract: | Based on process status of FRT polishing and cutting as well as characteristics of fibre dust in handcraft process, an integrated cleaning equipment of impingement, filtration and cascade was adopted to clean dust airflow, and cleaning was effective. Engineering design issues of the cleaning system such as gas collecting equipment, cleaning principle, technical process and counting of dust air flux were briefly explained. |
| |
| Keywords: | fibre dust cleaning system engineering design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
