首页 | 本学科首页   官方微博 | 高级检索  
     检索      

应用OCMA-220型油分仪测定水样中油含量在实际工作中的几个问题
引用本文:黎强,陈红梅.应用OCMA-220型油分仪测定水样中油含量在实际工作中的几个问题[J].重庆环境科学,2000,22(4):73-74,78.
作者姓名:黎强  陈红梅
作者单位:攀枝花钢铁集团公司劳动卫生防护研究所!攀枝花617023
摘    要:OCMA-220型油分仪应用非散红外光谱法测定水样中油的含量,测定结果较稳定,准确度较高,在环境监测中应用广泛。实际操作中,水样中悬浮料粒子较多且萃取层与CCL4层为乳化状态时,必须经滤纸过滤和无水Na2SO4脱水处理,才能进行测定。但经滤纸过滤和无水Na2SO4脱水处理后,空白值分别在5ppm和16ppm以上,如果样品油含量较低时,产生的系统误差,将导致分析结果准确度降低。

关 键 词:萃取  滤纸过滤  水质监测  水样  油含量  油分析仪
文章编号:1001-2141(2000)04-0073-03

A Few Problems in Actual Work to Determinate Oil Content in Water Samples by OCMA-220 Oil Analyser
Li Qiang,Chen Hongmei,Zhen Yeng.A Few Problems in Actual Work to Determinate Oil Content in Water Samples by OCMA-220 Oil Analyser[J].Chongqing Environmental Science,2000,22(4):73-74,78.
Authors:Li Qiang  Chen Hongmei  Zhen Yeng
Abstract:The OCMA-220 oil analyser is used to determinate the oil content in water samples by non infrared spectrometry.The determinated result is steadier and the accuracy is higher.It is applied extensively in environmental monitoring.In actual opreation,the water samples must be dehydrated through being filtered by filter paper and being eliminated by anhydrous Na 2SO 4 to determinate oil content in water samples,because there are many suspended particles in the water samples and the extraction layer is at emulsification state with CCL 4 layer.After being filtered by filter paper and being eliminated by anhydrous Na 2SO 4,the blank values are over 5 ppm and 16 ppm respectively.If the oil content in water samples is lower,the systematic error produced will lead up to cutting down the accuracy of analytical result.
Keywords:Internal  extraction  External  extraction  Filter  paper  filtering  Anhydrous  Na  2SO  4  eliminating  water  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号