| Abstract: | ABSTRACT: The conductivity of air, mineral oil (relative viscosity 77), and a light nontoxic oil (relative viscosity 4.7) was measured in three porous media: a sand, loamy sand, and a silt loam. The measurements were made over a range of water contents for each porous medium. Small volumes of air were present as well as significant amounts of water during most of the oil conductivity measurements. The results were compared to two methods for calculating conductivities of immiscible fluids in water-wet porous media. A new equation that accounts for swelling and for the gas slippage effect in very small pores was formulated for use with these methods The observed conductivities, spanning seven orders of magnitude, agree reasonably well with calculated values. Only three soil parameters are required to calculate the conductivities: (1) the saturated conductivity of water, (2) the saturated conductivity of the immiscible fluid of interest, and (3) a pore size index value that is obtained from an estimate from the water release curve of the porous material. Remediation of organic liquid spills is briefly discussed to illustrate the practical applications of gas phase conductivities, as well as those for immiscible organic liquid phases. It is concluded that, in light of spatial variation under field conditions, the method presented for calculating values of three-phase conductivities will be useful in the management of immiscible organic liquid spills and leaks. |
